Breitling Bentley B55 Supersport Connection Instructions

Category
Watches
Type
Connection Instructions
BENTLEY SUPERSPORTS B55
CONNECTION INSTRUCTIONS
21
CONNECTING THE WATCH TO A SMARTPHONE
1. Installation of the application on the smartphone
Before doing anything else, the «RACING» application must be installed on the smart-
phone.
The application for an Apple iPhone
®
can be downloaded on the App Store
SM
The application for an Android™ type smartphone
can be downloaded on Google Play™ store
The application is compatible with:
Apple iPhone
®
smartphones from version 4S and iOS 7.0
Android™ smartphones from version 4.4 (with Bluetooth
®
Low Energy compatible chip)
2. Pairing the watch with the smartphone
a) Check that Bluetooth
®
is activated on the watch SETTING CONNECT ON
b) Bluetooth
®
must also be activated on the smartphone
c) Start the application
d) When launched, the application will detect one or more watches:
“BREITLING B55” with its unique serial number (also engraved on the back of the
watch) select the watch.
e) The application will then ask for a 6-digit code.
This 6-digit code is automatically displayed on the watch (on the display at 6 o’clock)
with
PASSWRD (on the display at 12 o’clock).
The watch is now connected to the smartphone and it will be possible to use the application.
Once the 6-digit code has been introduced, for future connections, the application will
automatically connect to the watch without asking again for the code. If no watch is
connected to the application, the latter will not be able to go beyond the home page.
Please note that the application can only be connected to a single watch at a time. To
connect another watch to the same smartphone, it must be selected from the list on the
home screen and if necessary, its 6-digit code introduced. By the same token, a watch can
be connected to several smartphones, by each time following the procedure described
above, but not simultaneously.
3. The application
The application looks like a Dashboard which is the focal point. From here, it is possible
to enter the various windows.
To change window, you need to go back through the Dashboard. Each window has a
“help” function that explains how the watch works.
4. Notifi cations on the watch
In order to properly receive notifi cations on the watch, check that:
43
a)
the notifications for phone calls, emails, messages (SMS, WhatsApp) and calendar events
are activated on the smartphone. For Apple iPhone
®
, the emails need to be activated in
the Settings menu
Mail, Contacts, Calendars
New data
Activate
Push
“.
b) the notifications are activated on the watch through the application “RACING“.
5. Updating the watch firmware
The watch firmware can be updated through the application. If need be, the application
will inform the user of this option. In this event, it is recommended that the smartphone
and the watch be charged prior to proceeding with an update. This will last between
10 and 20 minutes. During this time, it is important not to interrupt the communication
between the watch and the smartphone: the watch must remain close to the
smartphone.
During the update, a window in the application will provide a progress report. On the
watch, the hands will be stopped and the digital display blocked. The watch will restart
automatically at the end of the update, but it must be synchronized once again and the
settings adjusted (time, date…).
6. In the event of problems – Resetting the watch
If the watch no longer responds or in the event of connection issues with the smart
-
phone, the watch may require resetting, as follows:
Select the
BATTERy function by turning the crown.
Pull the crown to position 2; the upper screen displays
DEEP SLEEP or SOFT SLEEP;
select
DEEP SLEEP by turning the crown.
Give P1 a 2 seconds press to confirm the extended standby. The hands will park imme
-
diately. Once the procedure is finished, the display turns off and the electronics are
disconnected.
Do not forget to push to crown back to neutral position 1.
To reactivate the watch, connect the charger cable. The watch is thus reset. All settings
will be lost after this operation.
NOTE: If the watch has been reset (battery completely discharged or after a DEEP
SLEEP), it must be unpaired from the smartphone before doing a new connection. This
is usually done in the Settings/Parameters menu Bluetooth menu of the smartphone.
Please also note that after a reset, the Bluetooth
®
on the watch has to be reactivated
SETTING CONNECT ON.
1615
The Bluetooth
®
word mark and logo are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Breitling SA is under license. Other trademarks and trade names are those of their
respective owners.
Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store
is a service mark of Apple Inc.
Google Play is a trademark of Google Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Breitling Bentley B55 Supersport Connection Instructions

Category
Watches
Type
Connection Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI