2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Mounting kits
  6. Mircom
  7. LT-1016 BB-700WP

Mircom LT-1016 BB-700WP Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Mircom LT-1016 BB-700WP Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
BB-700WP Installation Instructions
LT-1016 Rev.1
Dec 2011
BB-700WP
GK-022
GK-022
BB-700WP
GK-022BB-700WP
GK-021
Manual Station
Manual Station
GK-021
NOTCHES ARE
ON BOTTOM
GK-021
Manual Station
1. Remove the adhesive backing paper
from the GK-022 neoprene gasket.
2. Align the four screw holes on the
back in the gasket with the matching
holes on the back of the BB-700WP.
3. Press the adhesive side of the GK-
022 rmly into place on the BB-
700WP. The BB-700WP is now
ready for mounting. When mounting
the BB-700WP ensure the arrow on
the inside of the backbox is pointing
upwards.
4. Remove the adhesive backing paper
from the GK-021 neoprene gasket.
5. Align with the four mounting holes
and terminal block on the back of the
manual station.
6. Press the adhesive side of the GK-
021 rmly into place on the manual
station.
7. Ensure that the arrow on the inside
of the BB-700WP is pointing upwards
and unlock the manual station.
8. Align the four mounting holes of the
manual station and the BB-700WP.
9. Firmly press the manual station onto
the BB-700WP and secure with the
screws provided.
GK-022
BB-700WP
GK-021
Manual Station
BB-700WP
Manual Station
/