OPERATION
1. BeforetheSolarMotionLightcanoperatetoitsfullcapacity,theSolarPanelneedstobeinsunlightfor3days
tofullychargetheincludedbattery.Chargingshouldbedonewiththeunitinthe“OFF”position.
2. LocatedatthebottomoftheBatteryHousing(5)thereisaswitchwiththreepositions:
• Turn the switch to “AUTO” position, the light will turn on automatically at night when motion is
detectedbytheMotionDetectorHead(6).
• Turntheswitchto“ON”position,thelightcanbeusedasastandardlightforconstantillumination.
• Turntheswitchto“OFF”position,thelightwillremainoffandwillnotdetectanymovement.
HOWTOUSECONTROLDIALS
TheSolarMotionLighthas3differentcontroldialswhichcontrolthelight’sduration,
sensitivitytolightandsensitivitytomotion.
LUX(LIGHTLEVEL)
1. The LUX Adjusting dial (9) tells the sensor the level of darkness that must be
reachedbeforethelightturnson.
2. Ifsettothemaximum
level,thelightwillgoonindaylight.
3. Ifsettotheminimumsetting
thesensorwillonlytriggerthelighttoturnonatduskorwhenitisdark
out.Thisistheidealpositionforgeneralusage.
TIME
1. TheTIMEAdjustingdial(11)setsthedurationofilluminationtime.
2. The TIME is adjustable from 8 seconds to 2 minutes. Rotating the dial clockwise will increase the
illuminationtime.
SENS(SENSITIVITY)
Thisdeterminestherangeofmotiondetection:
1. Minimumposition–LowRange.
2. MidPositionNormalsetting.
3. MaximumpositionMaximumrange.
LOCATIONOFSOLARLIGHT
For best results, please locate the Solar Panel from your
COB Solar Light in a position where it can absorb direct
sunlightonthesolarpanel,andgenerallyfreefromcover
andshade.
TROUBLESHOOTING
IftheSolarMotionLightdoesnotilluminatewhenmovementinfrontofthesensorisobvious,pleaseobserve
thefollowing:
• Ensurethesolarpanelisinalocationwhereitwillreceivemaximumsunlightduringdaytimehours.