Motorola PMP 320 Administration And Configuration Manual

Category
Networking
Type
Administration And Configuration Manual
MAR 2010
© 2010 Motorola, Inc All Rights Reserved
PMP 320 Administration and
Configuration Guide
Release 1.1
MAR 2010
Accuracy
While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no
liability resulting from any inaccuracies or omissions in this document, or from use of the information
obtained herein. Motorola, Inc. reserves the right to make changes to any products described herein to
improve reliability, function, or design, and reserves the right to revise this document and to make changes
from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola,
Inc. does not assume any liability arising out of the application or use of any product, software, or circuit
described herein; neither does it convey license under its patent rights or the rights of others. It is possible
that this publication may contain references to, or information about Motorola products (machines and
programs), programming, or services that are not announced in your country. Such references or information
must not be construed to mean that Motorola intends to announce such Motorola products, programming, or
services in your country.
Copyrights
This document, Motorola products, and 3
rd
Party Software products described in this document may include
or describe copyrighted Motorola and other 3
rd
Party supplied computer programs stored in semiconductor
memories or other media. Laws in the United States and other countries preserve for Motorola, its licensors,
and other 3
rd
Party supplied software certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted
material. Accordingly, any copyrighted material of Motorola, its licensors, or the 3
rd
Party software supplied
material contained in the Motorola products described in this document may not be copied, reproduced,
reverse engineered, distributed, merged or modified in any manner without the express written permission
of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of
Motorola or other 3rd Party supplied software, except for the normal non-exclusive, royalty free license to
use that arises by operation of law in the sale of a product.
Restrictions
Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No
part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by any means, without prior
written permission of Motorola, Inc.
License Agreements
The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by
express license agreement only and may be used only in accordance with the terms of such an agreement.
High Risk Materials
Components, units, or 3
rd
Party products used in the product described herein are NOT fault-tolerant and are
NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous
environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft
Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities).
Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High
Risk Activities.
Trademarks
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product
or service names are the property of their respective owners.
The CE mark confirms Motorola, Inc. statement of compliance with EU directives applicable to this product.
Copies of the Declaration of Compliance and installation information in accordance with the requirements of
EN50385 can be obtained from the local Motorola representative or by contacting the Customer Network
Resolution Center (CNRC). The 24–hour telephone numbers are listed at in the overview section of this
manual or visit
www.motorola.com/pmp
.
Table
of
Contents
MAR 2010
i
Contents
PMP 320 Administration and Configuration Guide
What is covered in this manual? ............................................................................................................ 1
Revision History............................................................................................................................................ 2
Version information................................................................................................................................ 2
Release information ............................................................................................................................... 2
General information...................................................................................................................................... 3
Purpose .................................................................................................................................................. 3
Cross references .................................................................................................................................... 3
Document banner definitions ................................................................................................................. 3
Text conventions .................................................................................................................................... 4
Contacting Motorola ..................................................................................................................................... 5
Technical support................................................................................................................................... 5
Documentation ....................................................................................................................................... 6
Questions and comments or Errors........................................................................................................ 6
Chapter 1 : Product Description ............................................................. 1-1
Access Point (AP) ....................................................................................................................................... 1-3
Point-to-Multipoint CSM 320 Subscriber Module...................................................................................... 1-5
CAP and CSM 320 Specifications .............................................................................................................. 1-6
AAA, DHCP, and DNS .............................................................................................................................. 1-10
Chapter 2 : AP Software Tasks............................................................... 2-1
Check the AP Software Version ................................................................................................................. 2-2
Accessing the AP GUI.......................................................................................................................... 2-2
Logging in to the AP GUI and checking software version................................................................... 2-2
Before you begin ................................................................................................................................. 2-3
Adding the AP network element to the Network Root hierarchy ........................................................ 2-3
Managing the CNUT software packages.............................................................................................2-5
AP User Accounts ...................................................................................................................................... 2-9
Chapter 3 : IP Configuration .................................................................. 3-1
Contents
ii
MAR 2010
Configuring AP IP Settings.................................................................................................................. 3-2
Verifying the External DHCP connection with the AP......................................................................... 3-5
How to identify MAC addresses .......................................................................................................... 3-5
Chapter 4 : AP RF Parameter Configuration ........................................... 4-1
Setting operating frequency and base station ID ...................................................................................... 4-2
AP RF Parameter Configuration (Radio).................................................................................................... 4-3
Setting channel bandwidth and UL/DL ratio ............................................................................................. 4-4
Chapter 5 : CSM Software and Operation ............................................... 5-1
Logging in to the CSM............................................................................................................................... 5-2
Check the current software version on the CSM....................................................................................... 5-3
Upgrading to the latest software revision on the CSM.............................................................................. 5-4
Managing the CNUT software packages.............................................................................................5-6
CSM User Accounts ................................................................................................................................. 5-10
Configure the CSM IP Settings................................................................................................................ 5-11
Setting Port Forwarding on the CSM ...................................................................................................... 5-14
CSM Firewall Filter Settings ................................................................................................................... 5-16
Chapter 6 : AAA Server Configuration .................................................... 6-1
Aradial Server First-time Installation ........................................................................................................ 6-2
Aradial RADIUS for Windows OS or Linux (CentOS 5.3 Linux) Download.......................................... 6-2
Aradial Pre-configuration........................................................................................................................... 6-4
Configuring the AP for AAA operation ....................................................................................................... 6-5
AAA Server Installation.............................................................................................................................. 6-6
Adding a Network Access Server (NAS) .................................................................................................... 6-7
Adding a NAS Group.................................................................................................................................. 6-9
Adding a NAS User .................................................................................................................................. 6-10
Verifying the AAA Configuration.............................................................................................................. 6-11
Setting up the CSM for AAA Authentication............................................................................................ 6-12
Updating CSM Certificates ............................................................................................................... 6-13
Chapter 7 : Quality of Service (QoS) Configuration................................ 7-1
Overview ............................................................................................................................................. 7-1
Adding a QoS Profile ........................................................................................................................... 7-1
Modifying the Default Service Flows .................................................................................................. 7-4
Adding a Classification Rule Profile .................................................................................................... 7-4
Updating or deleting a Classification Rule Profile ..............................................................................7-5
Service Flow Creation................................................................................................................................ 7-7
Contents
MAR 2010
iii
Chapter 8 : Troubleshooting ................................................................. 8-1
The CSM shows DL synchronization – no other messages for CSM status......................................... 8-1
The CSM is stuck in Authorization state – on CSM status .................................................................. 8-2
The CSM is flipping between DL synchronization and ranging, operational ...................................... 8-3
The CSM is Operational – but no WAN IP address.............................................................................. 8-4
Chapter 9 : Regulatory, Legal, and Safety Notices ................................. 9-1
IMPORTANT NOTE ON MODIFICATIONS ......................................................................................... 9-1
NATIONAL AND REGIONAL REGULATORY NOTICES ...................................................................... 9-1
Industry Canada Notification .............................................................................................................. 9-2
European Union Notification............................................................................................................... 9-3
Equipment Disposal ............................................................................................................................ 9-3
EU Declaration of Conformity for RoHS Compliance.......................................................................... 9-3
Labeling and Disclosure Table for China ............................................................................................ 9-4
RF EXPOSURE SEPARATION DISTANCES ........................................................................................ 9-4
Details of Exposure Separation Distances Calculations and Power Compliance Margins .................. 9-5
Software License Terms and Conditions............................................................................................. 9-7
Hardware Warranty in US................................................................................................................... 9-9
LIMIT OF LIABILITY ........................................................................................................................... 9-9
List
of
Figures
MAR 2010
iv
List of Figures
Figure 1-1 High Level Network Diagram....................................................................................................... 1-1
Figure 1-2 Access Point (AP) shown with antenna attached............................................................................ 1-3
Figure 1-3 AP, radio only ................................................................................................................................. 1-4
Figure 5-1 CPE login screen, operator version.............................................................................................. 5-10
Figure 8-1 Checking the frequency and bandwidth setting on the CPE.......................................................... 8-2
Figure 8-2 CPE state always AUTHORIZATION .............................................................................................. 8-3
Figure 8-3 Log collection on the CPE .............................................................................................................. 8-4
Figure 8-4 SYSLOG status on the AP GUI........................................................................................................ 8-4
Figure 9-1 Peak power density calculation..................................................................................................... 9-5
List
of
Tables
MAR 2010
v
List of Tables
Table 1-1 Spectrum Range Operation.............................................................................................................. 1-2
Table 1-2 CAP 320 Frequency Specifications .................................................................................................. 1-6
Table 1-3 CAP 320 Performance Specifications............................................................................................... 1-6
Table 1-4 CAP 320 Spectrum Specifications.................................................................................................... 1-6
Table 1-5 CAP 320 Spectrum Specifications.................................................................................................... 1-6
Table 1-6 CAP 320 Link Budget Specifications................................................................................................ 1-7
Table 1-7 CAP 320 Antenna Specifications...................................................................................................... 1-7
Table 1-8 CAP 320 Physical Specifications...................................................................................................... 1-7
Table 1-9 CAP 320 Interface Specifications..................................................................................................... 1-8
Table 1-10 CAP 320 Certification Specifications ............................................................................................. 1-8
Table 4-11 Configure the AP IP settings.......................................................................................................... 3-2
Table 8-1 FCC IDs and the specific configurations.......................................................................................... 9-2
Table 8-2 Industry Canada Certification Numbers and the specific configuration.......................................... 9-3
Table 8-3 Disclosure table ............................................................................................................................... 9-4
Table 8-4 Calculated exposure distances and power compliance margins...................................................... 9-6
List of Tables
vi
MAR 2010
About
This
Manual
MAR 2010
1
PMP 320 Administration and Configuration
Guide
What is covered in this manual?
The audience for this document includes network planners, system operators, network
administrators, and equipment installers.
This user guide describes planning, configuration, installation, and operation of the CAP 320 (the
Access Point member of the PMP 320 family). It also includes information to help the operator
plan and deploy a Point to Multi-Point (PMP) 320 access network.
Products not covered in this user manual and are the related PMP 320 Access Network devices
have their own user guides, these items include: Cluster Management Module 4 (CMM4),
Network Updater Tool (CNUT), and Wireless Manager (WM). These documents are available on
the wireless broadband support link at:
http://motorola.wirelessbroadbandsupport.com/support/library/
.
Revision History
2
MAR 2010
Revision History
Version information
The following shows the issue status of this document since it was first released.
Version Date of issue Description
1 MAR 2010 Issue 1
Release information
The PMP 320 Access Network User guide is the first issue of this user guide.
General information
MAR 2010
3
General information
Purpose
Motorola documents provide the information to operate, install, and maintain Motorola
equipment. It is recommended that all personnel engaged in such activities be properly trained
by Motorola.
Motorola disclaims all liability whatsoever, implied or express, for any risk of damage, loss or
reduction in system performance arising directly or indirectly out of the failure of the customer,
or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or
recommendations made in this document.
These documents are not intended to replace the system and equipment training offered by
Motorola. They can be used to supplement and enhance the knowledge gained through such
training.
If this document was obtained when attending a Motorola training course, it will not
be updated or amended by Motorola. It is intended for TRAINING PURPOSES ONLY.
If it was supplied under normal operational circumstances, to support a major
software release, then corrections are supplied automatically by Motorola and posted
on the Motorola customer website.
Cross references
References to external publications are shown in italics. Other cross references, emphasized in
blue text in electronic versions, are active links to the references.
This document is divided in to numbered chapters that are divided in to sections. Sections are
not numbered, but are individually named at the top of each page, and are listed in the table of
contents.
Document banner definitions
A banner (oversized text on the bottom of the page, for example, PRELIMINARY – UNDER
DEVELOPMENT) indicates that some information contained in the document is not yet approved
for general customer use.
General information
4
MAR 2010
Text conventions
The following conventions are used in Motorola documents to represent keyboard input text,
screen output text and special key sequences.
Input
Characters typed in at the keyboard are shown like this.
Items of interest within a command appear like this.
Output
Messages, prompts, file listings, directories, utilities, and environmental
variables that appear on the screen are shown like this.
Items of interest within a screen display appear like this.
Special key sequences
Special key sequences are represented as follows:
CRTL-c or
CTRL+C
Press the Ctrl and C keys at the same time.
CTRL-SHIFT-c or
CTRL+SHIFT+C
Press the Ctrl, Shift, and C keys at the same time.
ALT-f or ALT+F
Press the Alt and F keys at the same time.
ALT+SHIFT+F11
Press the Alt, Shift, and F11 keys at the same time.
| Press the pipe symbol key.
RETURN or
ENTER
Press the Return or Enter key.
Contacting Motorola
MAR 2010
5
Contacting Motorola
Motorola appreciates feedback from the users of our documents.
Technical support
Here is the escalation path for resolution of a problem:
Check this user guide.
Consider checking the Community Forum and Knowledge Base at
http://motorola.wirelessbroadbandsupport.com/support/community
.
Escalate the problem to Canopy Technical Support at:
U.S. and Canada Email: technical-support@canopywireless.com
1-866-961-9288
Latin and Central America Email: [email protected]
Argentina 0800-666-2789
Brazil 0800-891-4360
Columbia 01-800-912-0557
Mexico 001-800-942-7721
Peru 0800-70-086
All other countries +420 533 336 946
Europe, Middle East, and Africa Email: [email protected]m
Denmark 043682114
France 0157323434
Germany 06950070204
Italy 0291483230
Lithuania 880 030 828
Netherlands 0202061404
Norway 24159815
Portugal 0217616160
Spain 0912754787
Russia 810 800 228 41044
Saudi Arabia 800 844 5345
South Africa 0800981900
United Kingdom 0203 0277499
Asia Pacific Email: [email protected]
+6048503854 (9 am – 5 pm Malaysia Time)
+420 533 336 946 (outside hours)
When you send e-mail or call, please include, as appropriate, software release on each module, IP addresses,
MAC addresses, and features enabled.
Contacting Motorola
6
MAR 2010
Documentation
Refer to www.wirelessbroadbandsupport.com for the latest updated PMP 320 documentation.
Questions and comments or Errors
Is this document accurate, complete, and clear? How can it be improved?
To report a documentation error, send your feedback on the documentation to technical-
documentation@canopywireless.com)
x the document type
x the document title
x the page number(s) with the error
x a detailed description of the error and if possible the proposed solution
Chapter 1
MAR 2010
1-1
Chapter 1: Product Description
A PMP 320 Access Network provides a low-cost point-to-multipoint broadband infrastructure
optimized for fixed outdoor applications. The access point is an 802.16e micro base station with
WiMAX CSM interoperability. The system offers an integrated, all-out door solution with simple
installation for rapid deployment.
Target applications for the PMP 320 Access Network include
x Tier 2 or tier 3 carriers, where the PMP 320 system provides a cost-effective, reliable
broadband connectivity for residential and business customers
x Government or Enterprise network operators, where the PMP 320 system provides
broadband-based infrastructure for administrative networks
x Wireless service providers, with broadband network service for any size operation
x Wireline service providers, with broadband wireless extensions for existing DSL or cable
networks.
As shown in
Figure 1-1 High Level Network Diagram
, a PMP 320 network consists of:
x APs - CAP 320 Access Points, typically a tower-mounted in a four-sector configuration.
x CSM 320 Subscriber Modules – Customer Subscriber Module (CSM) or, Customer Premise
Equipment (CPE), or also known as Subscriber Module (SM) is typically mounted on a
residence or other structure, and powered by a power adapter providing standard
802.3af power over Ethernet.
x CMM4 (Cluster Management Module 4) - a zero-footprint enclosure housing a GPS module
connected to a GPS antenna, sync- and power-injection circuitry, surge protection, and a
managed switch. The CMM is used to provide custom “sync over power over Ethernet” to
the APs as well as offering a networked, managed switch.
Figure 1-1 High Level Network Diagram
High Level Network Diagram
Core
Network
Internet
Radio Access
Network
AP
DHCP Server
(optional)
EMS (optional)
(e.g., Wireless Manager)
CPE
AAA Server
(optional)
Router
(optional)
DNS Server
(optional)
CMM4
Contacting Motorola Chapter 1: Product Description
1-2
MAR 2010
In addition, a PMP 320 network normally requires:
x AAA Server – Authentication, Authorization, and Accounting server using the RADIUS
(Remote Authentication Dial In User Service) protocol
x EMS – an Element Management System, such as the Motorola One Point Wireless Manager
x DHCP Server – Dynamic Host Configuration Protocol server
x DNS Server – Domain Name System server
x CNUT – Network Update Tool for updating device software
Router - optional
Motorola offers PMP 320 equipment that operates in the spectrum ranges as shown in
Table 1-1 Spectrum Range Operation
Licensed
Spectrum
Ranges
System
Name
AP Name SM Name AP Model
Number
SM Model
Number
Supported
Frequencies
3.3 GHz to
3.4 GHz
3.4 GHz to
3.6 GHz
PMP 35320
CAP 35320
CSM 35320
3530APC
3530SM
3.3 GHz to
3.6 GHz
3.6 GHz to
3.8 GHz
PMP 36320
CAP 36320
CSM 36320
3630APC
3630SM
3.6 GHz to
3.8 GHz
(Includes
3.65 GHz)
PMP 320 Administration and Configuration Guide Access Point (AP)
MAR 2010
1-3
Access Point (AP)
A PMP 320 Access Point (AP) is an 802.16e micro base station that connects wirelessly to up to
200 PMP 320 Subscriber Modules (SMs) or CSMs.
x 200 PMP 320 Subscriber Modules for 10 MHz and 7 MHz channels
x 87 PMP 320 Subscriber Modules for 3.5 MHz and 5 MHz channels.
The AP consists of an antenna and radio, as shown in
Figure 1-2 Access Point (AP) shown with
the antenna attached
, with the radio shown separately in
Figure 1-3 AP, radio only
. The standard
antenna is a dual-polarity 16.5 dBi antenna typically mounted in a four 90 ° sector configuration.
The AP is manageable by a local web interface, as well as SNMP or the Motorola One Point
Wireless Manager.
Installing an AP involves height, electricity, and exposure to RF (radio frequency)
energy. To avoid personal injury, follow applicable national and local safety regulations
along with industry best practices. Also, follow the specific guidelines in this document,
including maintaining a sustained exposure separation distance of 50 cm (~20 inches)
as described in the Regulatory, Legal, and Safety Notice section.
Figure 1-2 Access Point (AP) shown with the antenna attached
Antenna
DIV connector
MAIN connector
Ethernet
Radio
(Secured on Antenna)
Access Point (AP) Chapter 1: Product Description
1-4
MAR 2010
Figure 1-3 AP, radio only
The PMP 320 AP uses 802.16e for the over-the-air connection to the SMs or CSM. It is 802.16e
PHY and MAC compliant, and complies with the WiMAX Wave2 profile, except for mobility.
The AP uses a custom 56 VDC power system, typically powered by a CMM4. The AP uses less
than 25 W per AP, or less than 100 watts for 360 ° coverage. The AP includes integrated surge
suppression that is the equivalent to the 600SS surge suppressor recommended for SM
installations.
The AP functions as a router in the network, with routes to the CSMs (or SMs) auto-configured.
The AP supports ICMP and ARP.
The AP:
x can be configured to either receive its IP address from a network DHCP server, or be
manually assigned its IP address.
x can be configured to respond to SM DHCP requests either by relaying the requests to a
network DHCP server, or function as a DHCP server itself.
x can be configured either to use an external AAA (Authentication, Authorization, and
Accounting) server. When configured to use the external AAA server, the AP serves as a
relay between CSMs (SMs) and the AAA server for authentication requests, and serves as
a RADIUS client communicating with the AAA server for authorization of SM services.
x has an embedded web server for configuring using a web browser.
x supports SNMP v1, and uses standard 802.16e MIBs (Management Information Base) as
well as the Motorola 802.16e AP MIB.
PMP 320 Administration and Configuration Guide Point-to-Multipoint CSM 320 Subscriber Module
MAR 2010
1-5
Point-to-Multipoint CSM 320 Subscriber Module
The PMP 320 Customer Subscriber Module (CSM) or also known as the Customer Premise
Equipment (CSM) is the device that extends the broadband network or internet services to the
end user through communication with the AP. The key features of the CSM are:
x an integrated 14.5 dBi gain antenna
x 802.3af power over Ethernet (24 VDC)
x 802.16e standard fixed, outdoor solution
x products that are available in the 3.3 – 3.8 GHz spectrum
The CSM is managed by a local web interface, SNMP, or the Motorola Wireless Manager. The
CSM also functions as a Network Address Translation (NAT) device.
CAP and CSM 320 Specifications Chapter 1: Product Description
1-6
MAR 2010
CAP and CSM 320 Specifications
Specifications for the CAP and CSM 320 are listed in this section. The tables are labeled with the
device that is covered in the specification table. If there are differences between the CAP and the
CSM specifications in the tables where the specifications are combined and similar, the
differences are noted by calling out the device and the specific specification information for that
device.
Table 1-2 CAP 320 Frequency Specifications
CAP and CSM 320 Frequency Specifications
Frequency 3.3 – 3.6 GHz (CAP 35320) 3.6 – 3.8 GHz (CAP 36320)
Table 1-3 CAP and CSM 320 Performance Specifications
CAP and CSM Performance Specifications
Physical Layer CAP and
CSM
802.16e-2005 (5 MHz channel: 512 FFT: 7/10
MHz channel: 1024 FFT)
MAC Layer CAP and
CSM
802.16e-2005
CAP 2 x 25 dBm Maximum
Transmission Power
CSM 27 dBm
CAP Integrated: 2 x 41.5 dBm
Connectorized: Antenna Dependant
Maximum EIRP
CSM 41.5 dBm
Maximum Throughput
per Sector
Up to 45+ Mbps total aggregate per sector
Packets per Second 65,000
Maximum LoS Range
CAP
Up to 40 km with extended range feature
Table 1-4 CAP and CSM 320 Spectrum Specifications
CAP and CSM 320 Spectrum Specifications
Frequency Range of
Band
3.3 – 3.4 GHz 3.4 – 3.6 GHz 3.6 – 3.8 GHz
Channel Width Configurable to 5/7/10 MHz
Table 1-5 CAP and CSM 320 Spectrum Specifications
CAP and CSM 320 Security Specifications
Encryption EAP-TTLS/PKMv2 authentication over RADIUS, AES over-the-air encryption
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95

Motorola PMP 320 Administration And Configuration Manual

Category
Networking
Type
Administration And Configuration Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI