Dicota Z10748Z Datasheet

Category
Holders
Type
Datasheet
Keeper I
Universal PDA/Organizer Holder
Keeper I is the practical holder system for organizers. It is
easily mounted on the dashboard, the windshield or the middle
console. The receptacle with its flexible gooseneck and ball-
head mount (including suction foot and vacuum clip) let you
point your organizer in any direction you like.
The receptacle is suitable for all popular PDA´s organizers and
is easily snapped into the bottom side of the gooseneck or the
pedestal. This sophisticated snap-in technology can be
combined with any pedestal or gooseneck offered by DICOTA.
You as the customer have a large variety of applications and
other possibilities to choose from. The gooseneck can be
mounted on any smooth surface using either the suction foot
with the vacuum clip or the self-adhesive/screw-on pedestal!
This flexible mounting system provides for perfect mounting of
the Keeper I in any car!
Receptacle with self-locking holder clamps and adjustable
feet. flexible gooseneck with integrated ball-head mount
including suction foot and vacuum clip. self-adhesive or screw-
on pedestal for the receptacle and gooseneck.
Setting hints for the Keeper I:
Step 1: Use the screw at the top of the ball to adjust the
desired tensionary force.
Step 2: If you have a PDA that has buttons on the side, then
you can remove the adjustable plastic clamps from the Keeper
I, turn the Keeper I 180 degrees and affix the clamps again.
This allows for almost totally inhibited use.
Art. Nr.: Z10748Z (black)
Material: ABS synthetics
Weight: 0.15 kg / 0.33 lbs
Dimensions: 85 x 105 x 45 mm / 3.3 x 4.1 x 1.8 inch
DICOTA UK Ltd.
DICOTA House, Eastheath Avenue, Wokingham
RG41 2PR Berkshire
Phone: +44 - 870 - 382 1000
FAX: +44 - 870 - 382 1000
www.dicota.co.uk
  • Page 1 1

Dicota Z10748Z Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI