CNB UHS4848 Owner's manual

Ver. 1.4

Installation and User manual

UHS4848

Real Time 16ch HD-SDI DVR

2

UHS4848 installation and user manual

CE Information

The product must be installed according to the currently valid installation regulations

for EMC to guarantee the designed use and to prevent EMC problems.

The device supplied with this manual is according to the EC, EMC Directive,

89/336/EEC & LVD 73/23/EEC

Standard used for showing compliance with the essential requirements of the device:

EN 55022

EN 61000-3-2

EN 61000-3-3

EN 50130-4

EN 55024

LVD: EN60950-1

Safety Precautions

1. Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

2. WARNING – TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE

SET TO RAIN OR MOISTURE.

3. "IMPORTANT SAFETY INSTRUCTIONS"

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the

manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety. When the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

3

UHS4848 installation and user manual

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods

of time.

14) Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15) the apparatus shall not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, shall be placed on the apparatus.

16) Shall be connected to a MAINS socket outlet with a protective earthing

connection.

17) the disconnect device shall remain readily operable.

18) The socket-outlet shall be installed near the equipment and shall be easily

accessible.

4. Explanation of Safety Related Symbols

WARNING

Hazardous moving parts

Keep a

way from moving fan blades

4

UHS4848 installation and user manual

Contents

OVERVIEW .....................................................................................................................................6

1. CONTENTS OF PACKING .............................................................................................................6

2. FEATURES...................................................................................................................................7

INSTALLATION ..............................................................................................................................8

1. FRONT PANEL CONTROLS ..........................................................................................................8

2. REAR PANEL CONNECTORS...................................................................................................... 10

3. REMOTE CONTROL ................................................................................................................... 11

4. CONNECTION GUIDE ................................................................................................................. 12

5. TURNING ON THE DVR ............................................................................................................. 14

OPERATION .................................................................................................................................. 15

1. NAVIGATION .............................................................................................................................. 15

1-1. Mouse Control .................................................................................................................................. 15

1-2. Menu Navigation ............................................................................................................................... 15

2. MONITORING............................................................................................................................. 16

2-1. OSD Description ............................................................................................................................... 16

2-2. Select Channel ................................................................................................................................. 16

2-3. Digital Zoom ..................................................................................................................................... 17

3. PLAYBACK ................................................................................................................................. 18

3-1. OSD Description ............................................................................................................................... 18

3-2. Playback Control ............................................................................................................................... 18

3-3. Playback Search ............................................................................................................................... 19

4. PTZ CONTROL.......................................................................................................................... 20

4-1. PTZ Control by mouse ...................................................................................................................... 20

4-2. PTZ Control by remote keyboard ....................................................................................................... 22

4-3. PTZ Control by remote controller ....................................................................................................... 22

4-4. PTZ Control by Client software .......................................................................................................... 22

SETUP MENU ................................................................................................................................ 23

1. DISPLAY .................................................................................................................................... 23

2. RECORDING .............................................................................................................................. 28

3. SYSTEM .................................................................................................................................... 35

4. NETWORK ................................................................................................................................. 42

5. EVENT....................................................................................................................................... 45

SEARCH MENU ............................................................................................................................ 48

1. SEARCHING RECORDED DATA .................................................................................................. 48

1-1. Date/Time Search ............................................................................................................................. 48

1-2. Event Search .................................................................................................................................... 49

1-3. Calendar Search ............................................................................................................................... 49

1-4. Bookmark Search ............................................................................................................................. 51

2. ARCHIVING EVIDENCE TO USB ................................................................................................. 52

3. LOG ......................................................................................................................................... 54

CLIENT VIEWER SOFTWARE ................................................................................................... 55

1. LIVE MONITORING..................................................................................................................... 58

2. REMOTE SEARCH ..................................................................................................................... 61

2-1. Search.............................................................................................................................................. 61

2-2. Archive ............................................................................................................................................. 63

2-3. Remote Log ...................................................................................................................................... 65

2-4. Information ....................................................................................................................................... 66

3. REMOTE SETUP (MENU SETTINGS - SAME AS DVR)................................................................. 67

3-1. Display ............................................................................................................................................. 67

5

UHS4848 installation and user manual

3-2. Recording ......................................................................................................................................... 69

3-3. System ............................................................................................................................................. 73

3-4. Event ................................................................................................................................................ 78

4. LOCAL SEARCH (VIEWING DOWNLOADED FOOTAGE) ................................................................ 80

4-1. Search.............................................................................................................................................. 80

4-2. Log ................................................................................................................................................... 82

4-3. Info ................................................................................................................................................... 82

5. LOCAL SETUP ........................................................................................................................... 83

5-1. Global............................................................................................................................................... 83

5-2. Opacity ............................................................................................................................................. 83

5-3. Audio Buffer ...................................................................................................................................... 84

5-4. Camera Name .................................................................................................................................. 84

6. TELEMETRY CONTROL (PAN/TILT/ZOOM/FOCUS) ..................................................................... 85

6-1. Pan / Tilt / Zoom / Focus ................................................................................................................... 85

6-2. Preset / Learn ................................................................................................................................... 86

7. SCREEN POSITION SAVE/LOAD ................................................................................................ 87

7-1. Screen Position Save ........................................................................................................................ 87

7-2. Screen Position Load ........................................................................................................................ 87

8. FIRMWARE UPGRADE ............................................................................................................... 88

APPENDIX 1 .................................................................................................................................. 89

DYNAMIC IP (SUPPORTING DDNS SERVER) ................................................................................ 89

APPENDIX 2 .................................................................................................................................. 91

SETUP FOR DVR PORT & WEB SERVER PORT USING IP SHARING ROUTER .................................. 91

APPENDIX 3 .................................................................................................................................. 92

SPECIFICATION ............................................................................................................................. 92

6

UHS4848 installation and user manual

Overview

1. Contents of Packing

Mouse

Installation

CD

Power Cable

Remote Controller

Battery

(AAA x2)

7

UHS4848 installation and user manual

2. Features

● Convenience

- User-friendly GUI (Graphical User Interface)

- Easy-to-use menu structure

- Easy-to-use recorded data search (Time, Date, Motion, and Alarm)

- Easy-to control via IR remote control and USB 2.0 mouse.

● Stability

- Auto restart after power interruption

- DB structure offers data stabilisation and better storage utilisation

● Expandability

- Remote DVR’s can be controlled using the supplied software client viewer.

● Technology

- Embedded LINUX OS

- Maximum record rate 480fps@1080p

- High-resolution & high-quality H.264 algorithm

- Uses watermarking & scrambling technologies

● Functionality

- Variable recording function (normal, alarm, motion, schedule, duration, Time Lapse,)

- RS485 Telemetry & PTZ Control

- Full channel real-time monitoring

- Live monitoring, recording, playback, backup, remote access simultaneously

- Multi channel playback

- Variable events notification to e-mail, buzzer or PC Client system

8

UHS4848 installation and user manual

Installation

1. Front Panel Controls

① Power

System Power On/Off

② Reverse Play / Rewind ()

Reverse play of recorded data. When in play mode press again to enter fast rewind mode.

③ Pause ( ▌▌)

To freeze picture on playback mode and live mode.

④ Forward Play (▶)

Playback of the recorded data. When in play mode press again to enter fast forward

mode.

⑤ Stop / Eject (■)

To stop playback and go back to live mode. To eject DVD-RW

⑥ Menu

Displays the menu on the screen

⑦ Search

Entering search mode

① ⑤③ ②④⑫ ⑬ ⑭⑮ ⑥⑦ ⑪

⑩ ⑧⑨

9

UHS4848 installation and user manual

⑧ Arrow Buttons

Moves the cursor while in menu mode

⑨ Select

Menu selection

⑩ Indicator

- POWER: System Power On/Off (When power is on, the green light will be illuminated)

- REC: Recording status (When recording is on, the red light will flash)

- NET: Network status (When network is connected, the light will lash)

- HDD: HDD status (When the system is reading or writing to the HDD, the light will flash)

⑪ USB Port

USB connector for mouse control & downloading to USB memory.

⑫ Rec (●)

It starts & stop manual recording, password protected.

⑬ Multi-screen Display

Use the Multi-screen display button to select the display mode (single/4/9/16/30 way).

⑭ PTZ Channel Selection

Used to select the PTZ channel on multi-screen.

⑮ PTZ Mode

To control Pan/Tilt/Zoom/Focus, press this button to browse virtual key on screen.

16 Numeric & Character

Used for individual camera selection and selection of numbers & letters within the setup

menus and searches

10

UHS4848 installation and user manual

2. Rear Panel Connectors

① VIDEO IN

HD-SDI Camera inputs

② AUDIO IN

Audio inputs through line

③ AUDIO OUT

Audio output

④ HDMI

HDMI output port (1080p/1080i)

⑤ VGA

VGA video output for main monitor (1024x768 to 1920x1080)

⑥ NETWORK

Connecting to the DVR through Internet or LAN

⑦ USB Port

USB 2.0 port for mouse, USB storage

⑧ E-SATA Port

Port for e-SATA HDD

⑨ AC Power Input

AC 100-240V 50/60Hz

⑩ TEL (PTZ Camera Controller)

Serial Communication for Pan / Tilt Camera

⑪ KBD (Keyboard Controller)

Serial Communication for P/T/Z Control Keyboard

⑫ ALARM

Alarm(relay) output port

⑬ SENSOR IN

Sensor input ports

⑩

⑪

⑫

⑬

①

⑤

⑥

⑦

④

②

③

⑧

⑨

11

UHS4848 installation and user manual

3. Remote Control

① POWER : Power on/off

② P/T/Z : Entering PTZ Setup menu directly

③ REC : Start & Stop Recording

④ Numbers and letters (1 to 9)

⑤ INFO : Direct access system infomation

ID : Entering remocon ID set mode

MUTE : Audio Mute

AUDIO : Switches through Audio channels

⑥ MENU: Entering system menu

SEARCH: Entering search

ARROW : Left, Right, Up and Down

SEL : Select/Enter

⑦ VOL +/- : Up, down volume

⑧ CH +/- : Up, down channel

⑨ (◀)◀ : Reverse play

▶(▶) : Play (or fast forward)

I I : Pause

■ : Stop playback

⑩ OSD : On Screen Display ON/OFF

SEQ : Sequence operation

LOG : Direct access Log list

⑪ CAM : Changing PTZ icon

P/T : Pan &Tilt

Z/F : Zoom/ & Focus

DIS : Channel Division

⑩

①

②

③

④

⑤

⑥

⑧

⑨

⑦

⑪

12

UHS4848 installation and user manual

4. Connection Guide

Connecting the monitor

There are four available monitor outputs on DVR.

● HDMI output : Connect to the HDMI port of the HD monitor(HDTV).

● VGA output : Connect to the VGA port of the VGA monitor.

Connecting cameras

This unit comes with 16 HD-SDI video inputs.

Each video input has a corresponding looping output beneath it for passing the video signal

to another monitoring/recording device.

● Video input : Connect to the video out of the camera.

NOTE : Use the 75Ω coaxial cable when connecting between the DVR and HD-SDI

cameras because the dot noise can be caused by using non-75Ω coaxial cable.

Connecting audio

To record audio on the DVR, connect to the audio source.

● Audio input : Connect to the audio out of the microphone.

To listen to live or recorded audio, connect to an amplified speaker system.

● Audio output : Connect to the audio in of the audio AMP.

VGA

Monitor

PC

(Client)

HD

-

SDI

Camera

Keyboard

Mic

Speaker

Sensor

e

-

SATA

HDD

PTZ

Camera

Siren

HDTV

Mouse

13

UHS4848 installation and user manual

Connecting to a network

Use the ethernet port to connect to remote PC via ethernet network.

Connecting to a sensor input

There are 16 individual alarm inputs marked as Sensor In (1-16).

● Sensor inputs : Connect to (+) terminal of a sensor.

● Common GND : Connect to (–) terminals of sensors.

Connecting to a alarm output

The DVR can activate external devices such as buzzers or lights using the relay.

.

● Alarm A : Connect to (+) terminal of buzzer or light.

● Alarm B : Connect to (–) terminals of buzzer or light.

Connecting to a PTZ camera

This RS485 connector can be used to control Pan / Tilt / Zoom camera.

● Tel (+) : Connect to RS485 Rx(+) of PTZ camera.

● Tel (-) : Connect to RS485 Rx(-) of PTZ camera.

Common

GND

Sensor

Inputs

Common

GND

Alarm (B)

Alarm (A)

Tel (+)

Tel (-)

14

UHS4848 installation and user manual

Connecting to a remote keyboard

This RS485 connector is for a control keyboard.

● Kbd (+) : Connect to RS485 Tx(+) of the keyboard.

● Kbd (-) : Connect to RS485 Tx(-) of the keyboard.

5. Turning on the DVR

1. Connect the power cable.

2. Connect camera cables.

3. Connect a network cable and a monitor cable.

4. Press the POWER button on the front panel and wait until the main screen is displayed on

the monitor; this process may take a couple of minutes.

Kbd (+)

Kbd (-)

15

UHS4848 installation and user manual

Operation

1. Navigation

You can navigate the on screen menus using the front panel buttons, remote controller or

mouse.

1-1. Mouse Control

Right clicking the mouse brings up the following popup menu.

① Setup Setup Menu

② Setup ② Search Menu

③ PAN/Tilt Menu

④ Focus/Zoom Menu

⑤ Power Button

⑥ Sequence Button

⑦ Playback Button

⑧ Eject Button

⑨ Volume Up/Down Button

⑩ Multiscreen Display Button

⑪ Channel Up/Down Button

1-2. Menu Navigation

To enter the Setup menu, the user has to have the required access rights and be logged on.

Press the Menu button or right click with mouse on screen and select the menu icon.

The following screen will be displayed asking for password.

① Select the user ID.

② Enter the password.

The default password is 1111(4 number1).

③ Press OK, the setup menu will be displayed

on screen.

All menus are navigated around using the Left/

Right/ Up/ Down and the Select button or mouse.

To step back out of the menus, press MENU button

or click the right b

utton of the mouse.

⑦

⑨

⑪

⑤

⑧

⑩

①

③

⑥

⑨

⑪

②

④

①

②

③

16

UHS4848 installation and user manual

2. Monitoring

2-1. OSD Description

The Status Bar on screen shows HDD capacity, network connection, current time, etc.

① HDD capacity : Used capacity / Total capacity

② Multiscreen Display Button : Single/4 way/9 way/16 way split

③ USB memory connection

④ Mouse connection

⑤ Network connection : It is shown that admin or user is connected.

⑥ Archiving

⑦ Current Date/Time

2-2. Select Channel

Use the Multiscreen display button ( ) on the popup menu to select the display mode.

[Single Display] [4way split Display] [9way split Display] [16way split Display]

Also you can use the DIS button on the remote controller to change the display mode.

Display switches in the following order when the DIS button is pressed.

Single Channel  4 Channel  9 Channel  16 Channel  Single Channel

①

⑤

⑦

③

④

⑥

②

17

UHS4848 installation and user manual

2-3. Digital Zoom

The zoom feature will allow you to zoom in and out on your screen making it significantly

easier to view the image.

1) Left-click and drag the mouse to set the desired area for zoom in live or playback mode.

(It is available in single screen mode.)

2) Click the left button on the mouse.

The screen will be changed to the zoomed image and the small picture will be displayed

in the upper-right-hand corner of the screen.

The red box on the small picture indicates the position of the magnified image.

3) You can change the magnification of image and move the position of the magnified

image.

Turn the mouse wheel to enlarge or reduce the image.

Drag the image to move the position of the magnified image.

4) Click the right button on the mouse to return to the original mage.

Red box

18

UHS4848 installation and user manual

3. Playback

Click the right button on the mouse, the popup menu will be displayed on screen.

To begin playback, press the Play button on the popup menu.

3-1. OSD Description

The Control Bar on screen shows Playback control buttons, Progress bar, Display mode

buttons, Playback time, etc.

① Previous/ Next time buttons ⑨ Reverse Slow Play button

② Time Bar ⑩ Slow Play button

③ Playback Speed Display ⑪ Replay button

④ Display mode buttons (1/4/9/16ch) ⑫ Add Bookmark button

⑤ Stop button ⑬ Search Bookmark button

⑥ Pause button ⑭ Quick Archive button

⑦ Reverse Play button ⑮ Playback Date & Time

⑧ Play button

3-2. Playback Control

Playback

When the Play button(⑧) is pressed, the unit will play forward at the rate the data was

recorded. While in the play mode, the user may change the playback direction, playback

speed. To return to play forward operations, press the Play button(⑧).

Reverse Play

To begin reverse playback, press the Reverse Play button(⑦).

④

⑫

⑬

③

⑮

⑭

①

②

⑩

⑧

⑥

⑤

⑦

⑨

⑪

19

UHS4848 installation and user manual

Pause

During playback, press the Pause button(⑥). This feature pauses all full screen and

multiscreen images. When this button is pressed in the pause mode, the unit will play.

Single Frame Advance

During the pause mode, press the Play button(⑧) to view the frame directly after the frame

displayed on screen.

Single Frame Rewind

During the pause mode, press the Reverse Play button(⑦) to view the frame directly before

the frame displayed on screen.

Fast Forward

In playback mode, press the Play button(⑧) to switch between various fast play modes such

as x2, x4, x8, x16, x32 play.

Fast Backward

In reverse playback mode, press the Reverse Play button(⑦) to switch between various

reverse play modes such as x2, x4, x8, x16, x32 reverse play.

Slow Playback

In playback mode, press the Slow Play button(⑩) to switch between various slow play

modes such as x1/2, x1/4, x1/8, x1/16, x1/32 slow play.

Slow Reverse Play

In playback mode, press the Reverse Slow Play button(⑨) to switch between various slow

play modes such as x1/2, x1/4, x1/8, x1/16, x1/32 reverse slow play.

Stop

To stop playback and return to the live mode, press the Stop button(⑤).

3-3. Playback Search

The user can search the recorded video during playback.

The recorded video is indicated by a colour bar on the time bar(②).

You can use the Previous/ Next time buttons(①) to view if there are more recorded data.

Click the mouse at the desired point of the colour bar, you can view the recorded data.

20

UHS4848 installation and user manual

4. PTZ Control

The user can control PTZ cameras via RS485 communication.

The PTZ domes can be wired in a Daisy chain.

Daisy Chain configuration

The telemetry function of DVR can be controlled via 4 different methods:

1. Mouse

2. Remote keyboard

3. Remote controller

4. Software viewer

4-1. PTZ Control by mouse

1. Click the right button the mouse, the popup menu will appear.

2. To control Pan/Tilt, click the P/T icon(①).

To control Zoom/Focus, click the Z/F icon(②).

3. The PTZ menu will be displayed on screen.

The user can control PTZ cameras using PTZ menu.

Tel (+)

Tel (-)

②

①

⑨

⑤

③

④

①

②

⑦

⑧

⑥

⑩

Page is loading ...

CNB UHS4848 Owner's manual

CNB UHS4848 Owner's manual

Related papers

Other documents