Pro-Ject Clamp it User manual

Type
User manual

This manual is also suitable for

Clamp it
Manual
Clamp
it securely bonds the record to the platter,
without the weight of a record puck which can stress the
main platter bearing. You can adjust the downward
pressure depending on the condition of your warped
records. Clamp it is precision machined with diamond-
cut bevels and a leather pad to protect the record label,
Clamp it works with any platter spindle, threaded or
smooth.
Material: aluminum with leather coating
Diameter: 78 mm
Height: 33 mm
Weight: 120 g
Produced in Europe
www.project-audio.com
instagram.com/projectaudiosystems
www.facebook.com/PJ.Audio.Systems
2
3
Place Clamp it over the platter spindle with the record
on the platter. Applying a small amount of downward
pressure may help atten some warped records.
Tighten Clamp it by turning the knob clockwise until it
is snug. Do not over tighten! To remove, turn the knob
counter-clockwise to loosen, then lift o the clamp.
1
Make sure the screw cap is loose and press it down to
unlock the clamp mechanism.
  • Page 1 1
  • Page 2 2

Pro-Ject Clamp it User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI