Pro-Ject Audio Systems Clamp-IT Product information

Functional and easy to use sound improvement!

Vinyl sound can be significantly improved, when unwanted resonances between record and platter can be reduced, while playback.

Therefore surfaces of record and platter should connect tigthly.

Standard record pucks, that use weight to achieve this, have 2 disadvantages:

1) The weight can induce higher levels of rumble, when used with lower cost turntables which have less massive main bearings

2) Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite: Vinyl will get shaped

like a bowl with no contact of the outer edges of the record to the platter.

Both will affect the sound negatively.

Clamp it is the real solution, an accessory with a clamp mechanism around the center spindle, that will not add weight, which would

induce rumble. You can fine-adjust pressure according condition of your warped records. Fitting of Clamp it is easily done within

seconds. This accessory will not only please your ears, its beautifully machined diamond-cut edges will also look extremely cool on

any turntable!

Product information

02. 2014

Update: JK / DZ Datum 25.02.2014

Clamp it

Record clamp

 Sound improvement for all turntables

 Reduces unwanted resonances while playback

 Fast and easy mounting

 Fine-adjustment of thightening force

 Full metal accessory with leather coating

 Diamond cut finish

MATERIAL aluminium with leather coating

DIAMETER 78mm

HEIGHT 33 mm

WEIGHT 120 g

PRO-JECT AUDIO SYSTEMS

a division of AUDIO TUNING GmbH

1050 Wien, Margaretenstraße 98, Telefon: +43 1 5448580

retailprice

79,00 €