Pro-Ject Audio Systems Clamp it User manual

Clamp it
Pro-Ject Audio Systems
Brand
Pro-Ject Audio Systems
Model
Clamp it
Type
User manual

This manual is also suitable for

Clamp it
Manual
Clamp
it securely bonds the record to the platter,
without the weight of a record puck which can stress the
main platter bearing. You can adjust the downward
pressure depending on the condition of your warped
records. Clamp it is precision machined with diamond-
cut bevels and a leather pad to protect the record label,
Clamp it works with any platter spindle, threaded or
smooth.
Material: aluminum with leather coating
Diameter: 78 mm
Height: 33 mm
Weight: 120 g
Produced in Europe
www.project-audio.com
instagram.com/projectaudiosystems
www.facebook.com/PJ.Audio.Systems
2
3
Place Clamp it over the platter spindle with the record
on the platter. Applying a small amount of downward
pressure may help atten some warped records.
Tighten Clamp it by turning the knob clockwise until it
is snug. Do not over tighten! To remove, turn the knob
counter-clockwise to loosen, then lift o the clamp.
1
Make sure the screw cap is loose and press it down to
unlock the clamp mechanism.
  • Page 1 1
  • Page 2 2

Pro-Ject Audio Systems Clamp it User manual

Clamp it
Pro-Ject Audio Systems
Brand
Pro-Ject Audio Systems
Model
Clamp it
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents