Martin Yale P6200 User manual

Provided By

http://www.MyBinding.com

http://www.MyBindingBlog.com

Martin Yale P6200

Paper Folder

Cleaning Rollers

P6200--Cleaning Rollers

From time to time it will be necessary to clean the rollers on

the P6200. The following instructions will assist in completing

this simple, periodic maintenance.

1. Remove the four Phillips screws from the bottom of the unit,

one on each corner. See photo 1

2. Separate the upper cover from the base by lifting up. There will

be some resistance where the power cord jack lines up. Apply

pressure to the cover as you lift up to remove.

3. Clean the rubber roller on the unit with Martin Yale Rubber

Roller Cleaner, a scotch-Brite pad, and shop cloth (used for

cleaning any remaining liquid residue once rollers are scoured.)

See Photo 2

4. Once roller is cleaned, reinstall cover onto machine. Take

care to line up power cord jack correctly. Run 4-5 sheets

through the machine for test and to remove any remaining

residue.

Photo 1 Photo 2