Xiaomi MiJia Induction Heating Pressure Rice Cooker User manual

Brand: Xiaomi

Model: MiJia Induction Heating Pressure Rice Cooker

Category: Rice cookers

Type: User manual

This manual is also suitable for

YLIH01CM

MiJia Heating Pressure Rice Cooker

Before using the device, read the instructions carefully

Content

YLIH01CM_V2.0

Please read the instructions carefully to ensure correct and safe use of this device.

This product is only intended for home use.

Pay special attention to the section «Precautions» (p. 8-9)

Power

cable

Measuring cup Spoon (at) Ложка ( soup)

Before use

1. Introduction to the product 02

2. Fast using 03

3. The client application App 03

4. Regulation of the time in standby mode 04

Usage

5. Operation Manual 04

Cooking, quick cooking 05

Rice porridge, heat preservation 05

Personal settings, the choice of the program 05

6. Cleaning the rice cooker

The assembly, disassembly 06

FAQ

7. Troubleshooting 05

8. Fault codes 07

9. Precautions 07

10. Basic settings 08

11. Name of Product 08

12. The presence of toxic and hazardous substances 08

13. Schematic diagram 09

14. Warranty 09

XIAOMI-MI.COM

Introduction to the product

Temperature

sensor

Steam release

valve

Inner lid latch

Removable inner lid

Protective

surface

Water level

indicator

Button to

open the lid

Attention! Heat! After use,

remove to wash.

Attention! Heat! Before

installing the inner lid, set

the steam release valve

The back side of

inner cover

Reux valve Safety valve Pressure

controller

The front side of

inner cover

Control Panel

1. LED digital display time

2. Time control buttons (hours / minutes)

3. Select of program

4. Menu

5. Select / Cancel

6. Digital timer

7. Start Button

XIAOMI-MI.COM

Quick using

1. Power Connection

Plug one end into the rice cooker, and the second - to a power

supply.

2. Wi-Fi connection

Connecting Rice cooker to the power supply for the rst time will

automatically open connection to network. Connect the new device in

the application «Mi Smart Home».

Note: Use a thin object to press and hold for 5 seconds the reset

button Wi-Fi, and then re-open standby connection to the network.

Wi-Fi indicator

Hole to reset Wi-Fi

Indicator

Waiting for connection Connecting to a network Connecting succesfully

Yellow blinks Blue blinks Blue lit

Application

Even more Smart devices can be found in a mobile application Mi

«Smart Home»

Installing the client application

To install the client application on your smartphone, open Mi Store

and search for «Mi Smart Home» App or scan the QR-Code.

This device is already in the list of devices in the «Mi Smart Home»,

supporting MIUI system, and can interface with other intelligent

devices of your home.

By connecting a smartphone to the Wi-Fi network, open the

downloaded client application and follow the instructions shown on

the phone display.

XIAOMI-MI.COM

Regulation of time in

standby mode

Press and hold program selecting button for 5 seconds to enter the

time control mode.

Warning: when you connect to the Internet, the time will be

automatically tuned.

1. Press and hold for 5 seconds

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

Start

Set/Cancel

Program select

2. To adjust the time, use the «Hour» and «Minute» buttons, and

then click on the «Start» button to conrm your selection.

Start

Switching menu

Click on «Select / Cancel» to select a desired mode. Each time you press the button,

mode will be switched in turn: «Cooking / Quick cooking / Rice porridge / Heat

preservation / Personal settings»

Set/Cancel

1. Cooking

Turn on «Cooking» mode. The program will automatically congure the cooking duration

depends on the amount of rice (the default time of cooking - 1 hour).

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

2. Quick cooking

Automatic detection of the cooking time depending on the amount of rice (default cooking time -

40 minutes).

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

3. Rice porridge

Time default cooking - 1.30. Adjust porridge cooking time.

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

Set the desired cooking time by pressing the «Hour» and «Minute» buttons. Control range -

from 40 minutes to 4 hours.

XIAOMI-MI.COM

Switching menu

4. Heat preservation

At the end of cooking, the rice cooker automatically switches to the keep warm mode.

Maintain temperature is about 73 C.

You can manually select the mode of keeping warm.

Warning: not recommended to leave heat preservation mode switched on for more

than 12 hours. If this mode is activated for more than 24 hours, the rice cooker

automatically switches to standby mode (heat preservation mode is turned o).

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

5. Personal settings

The app recommends a creation of a plurality of modes of dierent delicious dishes.

Use the App to run your own settings for the preparation of meals.

Cooking / Fast cooking / Rice porridge / Heat preservation / Personal settings

6. Program select

1. After selecting the desired mode (eg «Cooking»), click on the «Select program» to

make the settings.

Note: When selecting a program, make sure to set the correct current time on the rice

cooker.

2. Set the cooking time by pressing the buttons «Hour» and «Minute», and then click

on the «Start» button to start cooking.

Note: Set the time in 24 hour format.

Trouble-shooting

XIAOMI-MI.COM

Cleaning of the Rice cooker

1. Disassembling

1. Turn left to remove a protective cover

Note: After each use it is necessary to

wash the inner cover and steam release

valve.

Open a latch, pull the gasket.

Open a steam release valve, pull the

latch to the side, open the valve, and

then remove the seal.

2. Assembling

Install the gasket, align, close up.

3. Under inner cover, you will see

the steam release valve, which

must be removed.

2. After a light pressing on a latch

inside of cover, it automatically

pops up. Remove the inner cover.

1. Hold the gasket in its groove,

align it, and then lightly press

down on the latch until you hear

a «click».

2. Accurately move the pair of release

valve on the steam outlet hole, and then

lightly pressing down, slowly insert it into

the installation location.

3. Insert a support ring of the inner lid in a special

slot in the rice cooker, slightly press down an inner

cover up until you hear a «click».

4. Insert a protective surface

along the xing plate on a right

side.

Note: Steam release valve and

the inner cover must be set

dierently or Rice cooker cover

will not close properly.

XIAOMI-MI.COM

Fault codes

LED Indication error: White LED indicates an error, the other indicators are o

Precautions

Limitations of use:

For the normal functioning of the product height above sea level should be between

0 m - 2000 m.

Please do not install this product near the other sensitive to electromagnetic

interference devices.

Please do not use foreign domestic cup or bowl with deformations, in order to avoid

overheating, so that you can get injured or burned.

Care and Cleaning:

Do not immerse the product in water and do not spray the water to it.

Do not use hard sponge or other hard objects to wash rice cookers or bowl.

To clean the rice cooker with a soft cloth.

Power cable:

Use only the power cord that was originally supplied with the rice cooker.

Before performing any action on the maintenance of the device or moving, unplug the power

cord from the wall outlet.

If the power cable is damaged, replace it with the same original power cable.

Do not twist, bend or peredavlivayte power cord. Otherwise, the current-carrying cable

conductors are stripped or broken.

Do not use the rice cooker power cord for any other devices.

Safety in the operation of a power supply:

The excess of 220V AC, the use of the device is prohibited to prevent a re.

It is strongly recommended to disconnect a power cord from the wall outlet to avoid electrical

shock, short-circuit and ignite. To disconnect a power cord, do not use a lot of force.

Do not allow yourself to use the device to adolescents, set rice cooker out of reach of small

children to avoid electric shock, scalding and occurrence of other accidents.

Do not insert or unplug a power cord with wet hands to avoid electric shock or other risks.

Do not use any foreign power cables.

Do not connect a power cord to the rice cookers block outlet to avoid a re hazard.

Environment:

Due to the presence of steam and hot air emanating from the rice cooker, your walls and

furniture can get damaged, change color or become deformed. To avoid such situations,

while using the device set the rice cooker at a distance of 30 cm from walls and furniture.

In the case of installation rice cookers in the kitchen cupboard, or in other places, make sure

there is ventilation when using the device.

Using:

While cooking is strictly forbidden to open the lid. After the rice cooker automatically nish

cooking or pauses in the middle of the cooking process, wait for the full release of pressure,

only open the device.

Do not install the inner bowl to other sources of heat to heat it up (eg, induction cooker, gas

stove).

Do not insert any objects into the outlet or into other slots.

In the process of using of the rice cooker or immediately after cooking, be careful, don`t be

close to the hot steam. Especially watch out for children at the moment, to avoid burns.

In no case do not cook in the rice cooker products that can clog the exhaust port (eg, dried

seaweed, seaweed and other leaf products).

It is strictly forbidden to put any objects on the rice cooker in the cooking process, as this may

XIAOMI-MI.COM

lead to the blocking of the release of steam.

If the save temperature of any food longer than the time that is characteristic for normal

cooking, you may see the peculiar smell of rice.

Completion of cooking:

After cooking, do not forget to turn o the rice cooker and disconnect it from the power

supply.

Regularly check the steam release channel pair to make sure they are not clogged.

When a problem occurs, immediately discontinue use of the device, disconnect it from the

power supply. Wait for rice cooker cooling, and then open the lid and remove the bowl.

Other special instructions:

Please, do not let fall or stress of the device to avoid breakage or any damage.

Do not use the rice cooker bowl, if it is damaged, to avoid burns or injury to hot steam,

which can be released no control over other openings.

Do not remodel the unit. It is forbidden to perform maintenance, dismantle unauthorized

device professionals to avoid the risk of re, electric shock or other risks.

When a problem occurs, immediately discontinue use of the device, to avoid the risk of

re, electric shock or other risks.

Faults:

Overheating of power cord socket in the cooking process.

Seepage incomprehensible smoke / steam or burnt odor.

Availability split some parts of rice cookers, they are slacking or the presence of

incomprehensible noise.

The deformation of the cup.

As well as other faults.

Main specications

Name: Pressure IH Rice Cooker;

Model: YLIH01CM;

Capacity: 3.0L;

Heating method: IH heating;

Power Rating: 1100W;

Voltage / Rated Frequency: 220V - 50Hz;

Nominal working pressure: 20kPa;

Dimensions: 300 x 251 x 212 mm;

Wireless connectivity: Wi-FiIEEE 802.11 b / g / n 2.4GHz;

Certicate number for this model: CMIIT ID: 2014DR5056 module.

Name of product

YLIH01CM

YLIH - short description of the functional characteristics.

01 - serial number of the construction.

CM - manufacturer.

Presence of toxic and hazardous substances

0: toxic and harmful substances in all components of the device are contained in an

amount below the limit value according to SJ / T11363-2006 «limit the requirement for

toxic and hazardous substances in products.»

X: indicates the presence of toxic and harmful substances, at least one of the

components of this product in excess of the limit value, according to SJ / T11363-2006

«Requirements limiting the presence of toxic and hazardous substances in products.»

XIAOMI-MI.COM

Schematic diagram

1. The main control circuit board

2. Connection cable

3. Power panel (switchboard)

4. The side walls of the heating unit

5. The upper surface of the heating unit

6. Temperature Sensor bottom surface

7. The upper surface of the temperature sensor

8. The solenoid valve

9. Hall Sensor

10. Temperature sensor IGBT

11. Speaker

12. Fan

13. Temperature fuse

14. The electromagnetic coil (solenoid)

15. The fuse of electric current

Warranty

Warranty service is carried out in accordance with the law on «consumer rights» and the

«Law on the quality of products.»

The warranty service includes:

1. Within 7 days of purchase and signing the warranty card, in the event of a problem, if its

cause is not the human factor, after the presentation of the current guarantees and other

documents, the buyer can choose a free replacement product, return or repair.

2. When returning goods purchased on the ocial Xaiomi website or through other ocial

Xaiomi representation, without any justication, within 7 days after purchase, all shipping

costs assumes the consumer (when returning the purchase payment for travel costs not

returns). At the same time return the goods within 7 days after the purchase is not possible

in the following cases: the goods for damage incurred due to the human factor, missing or

damaged packaging, or any component.

3. Within 15 days from the date of purchase and signing the warranty card, in the event of

a problem, if its cause is not the human factor, the buyer can choose a free replacement or

repair of the goods (free samples of goods can not be exchanged).

XIAOMI-MI.COM

I Warranty terms

Note: In the process of transportation of goods is necessary to ensure its integrity and

security. Therefore, we recommend that you retain the packaging for at least 15 days

from the date of purchase. If you need to perform a refund or replacement product, but its

packaging is damaged or absent, the buyer shall reimburse the cost. Thank you for your

understanding!

II Warranty period

The warranty period is calculated from the date of receipt of the goods by the buyer or

its installation;

If you can not tell the date of receipt of the goods or their installation, the warranty

period is calculated from the date shown on the sales receipt;

If you can not provide documentary evidence of a valid warranty card, warranty service

is valid for 6 months from the date of manufacture the device;

If you can not provide documentary evidence of a valid warranty card and can not see

the production date, in this case, the warranty is valid for 6 months from the date of the

earliest appearance of the product on the market.

III Documentary proof of a valid warranty card

To conrm the applicable warranty after-sales service you can provide a signed receipt

for the goods, receipt and warranty card.

IV Measuring cup, spoon (at surface), spoon (soup)

are not included in the warranty service

V Terms that are not included in

the warranty service

1. Damage or breakage caused by the fault of the consumer, resulting from

transportation, improper storage or use;

2. Making the device, its maintenance by unauthorized representatives of other

companies, causing any damage (including, if the user to repair or disassemble the

machine);

3. No warranty card, purchase receipt or other proof of purchase;

4. The presence of patches, the mismatch of the sales receipt or the warranty card with

the goods;

5. Damage caused by force majeure;

6. The warranty period has expired;

7. The emergence of problems as a result of use of the product in improper

surroundings, which does not match the description in the manual (eg, voltage,

ventilation, etc.).

If you have any questions, go to the site after-sales service or call technical support.

Producer: «Shanghai Chunmi Electronic Technology»

Location: China (Shanghai), district. Ziyou Maoyi Shiyan, ul. Shengxia 399, avenue k.1,

zd.328, k.3075

Standard: GB 4706.1-2005 GB 4706.19-2008 GB 4706.14-2008 GB 9684-2011 Q31 /

0115000393C001-2015

This product has additional elements made from a plastic material that has been

manufactured and provided by company «Foshan Maijinyi Siliao» Ltd.

Located on the production license: Guandun XK16-204-01896

XIAOMI-MI.COM

Xiaomi MiJia Induction Heating Pressure Rice Cooker User manual

Brand: Xiaomi

Model: MiJia Induction Heating Pressure Rice Cooker

Category: Rice cookers

Type: User manual

This manual is also suitable for

YLIH01CM

Download PDF

report

Xiaomi MiJia Induction Heating Pressure Rice Cooker User manual

This manual is also suitable for

Xiaomi MiJia Induction Heating Pressure Rice Cooker User manual

Related papers

Other documents