Digimerge DBB23TL-PK4 Quick start guide
- Category
- Security cameras
- Type
- Quick start guide
Camera Specifications
INDOOR / OUTDOOR
COLOR CAMERA
with Night Vision
Dimensions
Image Sensor 1/4” High Resolution Color
Lens / Lens Mount
Video Format / Pixels
Horizontal Resolution
Minimum Illumination
Termination
IR / Night Vision Range
FOV (diagonal)
S/N Ratio
Sync. & Scan. Systems
Video Output
Power Consumption
NTSC: 656(H) x 492 (V)
480 TVL
0.6 LUX @ F1.2 (IR off)
0 LUX (IR LEDs on)
Video: BNC Female
Power: Barrel Female
18 IR LEDs/850nm/50’ (15m)
50 Degrees
> 48dB
Internal; 2:1 Interlace
Comp. 1.0 Vpp @ 75ohm
250 mA or 3W max
Operating Temp.
Dimensions
WxLxH
(with stand)
14°F ~ 122°F
(-10°C ~ 50°C)
2.6" x 4.2"" x 5.2"
66 mm x 107 mm x 132 mm
5.1 mm F2.8/ Fixed
Iris & Shutter Speed AES; 1/60 ~ 1/50,000 sec.
Power Requirement 12V DC ±10%
Weight (with stand) 0.6 lbs. / 0.26 kg
MODEL: DBB23TL SERIES
English Version 1.0
HIGH RESOLUTION
Digimerge Technologies Inc.
Copyright © 2011 Digimerge Technologies Inc.
As our products are subject to continuous improve-
ment, Digimerge reserves the right to modify product
design, specifications and prices, without notice and
without incurring any obligation. E&OE
QUICK START GUIDE
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.digimerge.com
IT’S ALL ON THE WEB!
Copyright © 2011 Digimerge Technology Inc.
www.digimerge.com
Contents Installing the camera
High Resolution Color
Bullet Camera with Night
Vision*
To install the camera:
1. Mount the camera stand to the desired mounting
surface.
2. Attach the camera to the stand at either of the two
connection points.
3. Connect the BNC end of the cable to a DVR or
monitor.
4. Connect the included 12V DC Power Adaptor to the
camera(s).
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the cameras and
cables to a TV, DVR, or Observation System.
Figure 1.0 Use the stand for ceiling, table, or wall mounting.
Wall Mount
Ceiling Mount
Table Mount
ATTENTION: This camera includes an Auto Mechanical IR Cut
Filter. When the camera changes between Day/Night Lighting, an
audible clicking noise may be heard coming from the camera.
This clicking is normal, and indicates that the camera filter is
working.
Figure 2.0 Connect an AC power adapter
AC Power Adapter
4-in-1 Power Adapter
(optional)
Features
• High resolution image sensor produces sharp and
clear video at 480 TV lines of resolution
• Pure Flat™ lens eliminates image curving for an
undistorted view
• Anti-glare technology ensures clear images even in
strong lighting situations
• Auto Mechanical IR Cut Filter ensures accurate color
reproduction in all lighting conditions
• Up to 50 ft. / 15 m night vision capability †
• Weatherproof Indoor/Outdoor housing (IP66)‡
• Ceiling or wall mountable
† IR illumination range under ideal conditions. Actual range and clarity may vary
depending on scene/object reflection and camera application.
‡ Not intended for submersion in water. Installation in a sheltered location
recommended.
Mounting Stand*
Connecting the camera
Setup Diagram:
AC Power Adapter**
* Model DBB23TL-PK4 is a 4-pack that includes four of the listed items.
** A "4-in-1" Power Adapter that provides power to four cameras may be
substituted for four individual power adapters, depending on product
configuration.
WARNING - A REGULATED UL/CSA APPROVED 12V DC power supply
is REQUIRED for use with this camera. Use of a non-regulated, non-
conforming power supply can damage this product and will void the
warranty.
-
1
-
2
Digimerge DBB23TL-PK4 Quick start guide
- Category
- Security cameras
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Digimerge DBB13TL-PK4 Quick start guide
-
-
-
-
-
-
-
-
Digimerge DND13TL2 User manual
-