Mettler Toledo Software Package SQC-XPE Installation guide

Mettler Toledo
Brand
Mettler Toledo
Model
Software Package SQC-XPE
Type
Installation guide
Installation Instructions
Software Package
SQC-XPE
Registrierung / Registration / Enregistrement / Registro / Registrazione Nr/No/N ................
Serie- / Serial / Série / Serie / Serie (SNR) Nr/No/N ................
Waage / balance / balance / balanza / bilancia
Freischalt- / Activation / Activation / Activación / Attivazione Code ................
License agreement
English
The SQC-XPE license agreement (EULA_SQC_XPE) is contained on the SQC-XPE CD. With the instal-
lation of SQC-XPE you acknowledge that you have read this license agreement, understood it, and
agreed to be bound by its terms.
Installation
Insert the included CD. If the presentation/installation does not start by itself, then start "START.HTML"
manually. Choose language When you have finished installing the SQC-XPE firmware on the balance,
you will be prompted to enter a registration number and an activation code.
Registration number and activation code
The copy protection of SQC-XPE consists of two steps. First, the registration number must be entered to
enable the system for 30 days. Within this period, an activation code must be requested from METTLER
TOLEDO either by sending an e-mail to [email protected] (see file SQC-XPE Registration.txt on the
CD) stating the registration number and serial number (SNR) of the respective balance. An activation
code will then be generated and delivered. Entering the activation code then finally activates SQC-XPE.
1.Entertheregistrationnumber.PromptedwhenenteringtheSQCapplicationforthersttime.
2. Request an activation code, see note below.
3. Enter the activation code. Iterative prompt during the use of SQC-XPE.
Note: If SQC-XPE is ordered along with indication of the balance serial number (SNR), the activation
code is already included on this sheet. Any support will require declaration of this activation code.
Please write the serial number and activation code in the spaces provided at the top of this page and
keep this document in a safe place along with the CD!
Page is loading ...
Page is loading ...
*30251346*
Mettler-Toledo AG, Laboratory Weighing
CH-8606 Greifensee, Switzerland
Phone +41 44 944 22 11
Fax +41 44 944 30 60
Internet: www.mt.com
Subject to technical changes
© Mettler-Toledo AG 07/2015
30251346A ml
www.mt.com/balances
For more information
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Mettler Toledo Software Package SQC-XPE Installation guide

Mettler Toledo
Brand
Mettler Toledo
Model
Software Package SQC-XPE
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents