LG 34UC80 User manual

Category
LED displays
Type
User manual

This manual is also suitable for

www.lg.com
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future
reference.
OWNER’S MANUAL
34UC98
34UC88
IPS LED
MONITOR
(LED Monitor*)
2
ENGLISH
TABLE OF CONTENTS
LICENSE ---------------------------------3
ASSEMBLING AND PREPARING ------4
- Product Composition --------------------------------4
- Supported Drivers and Software --------------------5
- Product and Button Description --------------------6
How to Use the Joystick Button
Input Connector
- Moving and Lifting the Monitor ---------------------8
- Installing the Monitor -------------------------------9
Assembling the Stand (34UC98)
Assembling the Stand (34UC88)
Installing on a Table
Adjusting the Stand Height
Adjusting the Angle
Tidying up Cables
Using the Kensington Lock
Detaching the Stand Body
Installing the Wall Mount Plate
Installing on the Wall
USING THE MONITOR ---------------- 18
- Connecting to a PC -------------------------------- 18
HDMI Connection
DisplayPort Connection
Thunderbolt Connection
- Connecting AV Devices ---------------------------- 20
HDMI Connection
- Connecting Peripherals ---------------------------- 20
USB Cable connection - PC
Connecting Headphones
USER SETTINGS ---------------------- 22
- Activating the Main Menu ------------------------- 22
Main Menu Features
- User Settings -------------------------------------- 23
Menu Settings
Quick Settings
PBP
Picture
Sound
General
Reset
TROUBLESHOOTING ----------------- 33
PRODUCT SPECIFICATION ---------- 35
- Factory Support Mode ---------------------------- 37
- HDMI Timing (Video) ------------------------------ 37
- Power LED ----------------------------------------- 37
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm.
Wash hands after handling.
3
ENGLISH
LICENSE
Each model has different licenses. Visit
www.lg.com
for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode
source devices are all registered trademarks of the Video Electronics Standards Association.
MaxxAudio and additional MAXX trademarks are trademarks and/or registered trademarks of
Waves Audio Ltd.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.
4
ENGLISH
ASSEMBLING AND PREPARING
Product Composition
Please check whether all the components are included in the box before using the product. If there are any missing components,
contact the retailer where you purchased the product. Note that the product and related components may look different from
those shown here.
CD (Owner’s Manual / Software
/ Guides) / Cards
Power cord AC/DC Adapter HDMI cable
DisplayPort Cable Stand Base Cable Holder
34UC98 34UC88
Stand Body Stand Body
CAUTION
Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommend that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
NOTE
The components may look different from those illustrated here.
Without prior notice, all product information and specifications contained in this manual are subject to change to improve the
performance of the product.
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you
purchased the product.
The power cord provided may differ depending upon the region.
5
ENGLISH
Supported Drivers and Software
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product package.
Drivers and Software Installation Priority 34UC98 34UC88
Monitor Driver Recommended O O
ASM Driver Required O X
OnScreen Control Recommended O O
Dual Controller Optional O O
True Color Pro Optional X X
Required and Recommended: You can download and install the latest version from the enclosed CD or from the LGE website
(
www.lg.com
).
Optional: You can download and install the latest version from the LGE website (
www.lg.com
).
6
ENGLISH
Product and Button Description
Joystick Button / Power LED
On : Power on
Off : Power off
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
Power on Press the joystick button once with your finger to turn on the monitor.
Power off
Press and hold the joystick button once with your finger to turn off the
monitor.
/
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
The joystick button is located at the bottom of the monitor.
7
ENGLISH
Input Connector
34UC8834UC98
8
ENGLISH
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its
shape or size.
Place the monitor in the original box or packing material
before attempting to move it.
Before moving or lifting the monitor, disconnect the power
cord and all other cables.
Hold the bottom and side of the monitor frame firmly. Do
not hold the panel itself.
When holding the monitor, the screen should face toward
you to prevent it from being scratched.
When transporting the monitor, do not expose the
monitor to shock or excessive vibration.
When moving the monitor, keep it upright and never turn
the monitor on its side or tilt it sideways.
CAUTION
Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the
pixels used to create images.
If you use the monitor panel without the stand base, its
joystick button may cause the monitor to become unstable
and fall, resulting in damage to the monitor or human
injury. In addition, this may cause the joystick button to
malfunction.
9
ENGLISH
Installing the Monitor
Assembling the Stand (34UC98)
1
CAUTION
To protect the screen, place the screen face down on the
screen pad which is inside the box.
2
Stand Hinge
3
Stand Body
Cable Holder
* Assemble the
Cable Holder.
Stand Base
or
10
ENGLISH
4
5
NOTE
Press the stand until the button reaches the top.
CAUTION
Illustrations in this document represent typical procedures,
so they may look different from the actual product.
Applying excessive force when tightening screws may
cause damage to the monitor. Damage caused in this way
will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the
base. This may cause the monitor to fall off the stand and
could result in personal injury.
When lifting or moving the monitor, do not touch the
monitor screen. The force applied to the monitor screen
may cause damage to it.
11
ENGLISH
Assembling the Stand (34UC88)
1
CAUTION
To protect the screen, place the screen face down on the
screen pad which is inside the box.
2
Stand Hinge
3
Stand Body
Cable Holder
* Assemble the
Cable Holder.
Stand Base
or
12
ENGLISH
4
5
NOTE
Press the stand until the button reaches the top.
CAUTION
Illustrations in this document represent typical procedures,
so they may look different from the actual product.
Applying excessive force when tightening screws may
cause damage to the monitor. Damage caused in this way
will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the
base. This may cause the monitor to fall off the stand and
could result in personal injury.
When lifting or moving the monitor, do not touch the
monitor screen. The force applied to the monitor screen
may cause damage to it.
13
ENGLISH
Installing on a Table
1 Lift the monitor and place it on the table in an upright
position. Place the monitor at least 100 mm (3.9 inches)
away from the wall to ensure sufficient ventilation.
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
2 Connect the power adapter to the monitor and then plug
the power cord into the wall outlet.
34UC98
34UC88
3 Press the joystick button on the bottom of the monitor
to turn on the monitor.
CAUTION
Unplug the power cord before moving or installing the
monitor. There is risk of electric shock.
Cautions When Connecting Power Cord
100-240 V ~
Make sure to use the power cord that is provided in the
product package and connect it to a grounded power
outlet.
If you need another power cord, please contact your local
dealer or the nearest retail store.
14
ENGLISH
Adjusting the Stand Height
1 Place the monitor mounted on the stand base in an
upright position.
2 Handle the monitor with both hands for safety.
34UC98
Max 110.0 mm
(4.3 inches)
34UC88
Max 120.0 mm
(4.7 inches)
WARNING
When adjusting the screen height,
do not place your hand on the
stand body to avoid injury to your
fingers.
Adjusting the Angle
1 Place the monitor mounted on the stand base in an
upright position.
2 Adjust the angle of the screen.
34UC98
The angle of the screen can be adjusted forward or
backward from -5° to 15° for a comfortable viewing
experience.
-515
Front
Rear
34UC88
The angle of the screen can be adjusted forward or
backward from -5° to 20° for a comfortable viewing
experience.
Front
Rear
-515

-520
15
ENGLISH
WARNING
To avoid injury to the fingers when adjusting the screen,
do not hold the lower part of the monitor’s frame as
illustrated below.
34UC98
-515
34UC88
-515

-520
Be careful not to touch or press the screen area when
adjusting the angle of the monitor.
-515
NOTE
The left or right side of the monitor head can be slightly
rotated up or down (up to 3°). Adjust the horizontal level
of the monitor head.
Monitor head
Tidying up Cables
Arrange the cables using the cable holder as shown in the
illustration.
34UC98
Cable holder
34UC88
Cable holder
16
ENGLISH
Using the Kensington Lock
The connector for the Kensington security system is located
at the bottom of the monitor.
For more information on installation and usage, refer to
the Kensington lock owner’s manual or visit the website at
http://www.kensington.com
.
Connect the monitor to a table using the Kensington
security system cable.
NOTE
The Kensington security system is optional. You can obtain
optional accessories from most electronics stores.
Detaching the Stand Body
1 Place the monitor’s screen face down. To protect the
screen from scratches, cover the surface with a soft
cloth.
2 Remove the stand from the monitor by pressing the
button on the bottom center of the back of the monitor.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount
plate or other compatible devices.
1 Place the screen face down. To protect the monitor
panel (screen), cover the surface with a soft cloth or the
monitor protection pad included in the product package.
2 Remove the four screws tightened on the back of the
monitor.
3 Place the wall mount plate onto the monitor and align it
with the screw holes.
4 Tighten the four screws using a screwdriver to fix the
plate to the monitor.
NOTE
The wall mount plate is sold separately.
For more information on installation, refer to the wall
mount plate’s installation guide.
Be careful not to apply too much force while mounting the
wall mount plate as it may cause damage to the screen.
17
ENGLISH
Installing on the Wall
Install the monitor at least 100 mm (3.9 inches) away from
the wall and leave about 100 mm (3.9 inches) of space at
each side of the monitor to ensure sufficient ventilation.
Detailed installation instructions can be obtained from your
local retail store. Alternatively, please refer to the manual for
how to install and set up a tilting wall mounting bracket.
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
100 mm
(3.9 inches)
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1 If you use screws longer than the standard length, it may
damage the inside of the product.
2 A non-VESA standard screw may damage the product
and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard
screws.
Wall Mount (mm) 100 x 100
Stand Screw M4 x L10
Required Screws 4
Wall Mount Plate
(Optional)
RW120
NOTE
Use the screws specified by VESA standards.
The wall mount kit includes the installation guide and all
necessary parts.
The wall mounting bracket is optional. You can obtain
optional accessories from your local dealer.
The length of the screw may differ for each wall mounting
bracket. Be sure to use the proper length.
For more information, please refer to the user manual for
the wall mounting bracket.
CAUTION
Unplug the power cord before moving or installing the
monitor to avoid electric shock.
Installing the monitor on the ceiling or on a slanted wall
may result in the monitor falling off, which could lead to
injury. Use an authorized LG wall mount and contact the
local dealer or qualified personnel.
Applying excessive force when tightening screws may
cause damage to the monitor. Damage caused in this way
will not be covered by the product warranty.
Use the wall mounting bracket and screws that conform
to VESA standards. Damage caused by the use or misuse
of inappropriate components will not be covered by the
product warranty.
When measured from the back of the monitor, the length
of each installed screw must be 8 mm (0.3 inches) or less.
Wall Mount Plate
Back of the
Monitor
Screw
Dimensions
: M4 x L10
Wall Mount Plate
Back of the
Monitor
Max 8 mm
(0.3 inches)
18
ENGLISH
USING THE MONITOR
The following instructions are based on the 34UC98
model. Illustrations in this manual may differ from the
actual product.
Press the joystick button, go to Menu Quick Settings
Input, and then select the input option.
CAUTION
Do not press the screen for a prolonged time. This may
cause image distortion.
Do not display a still image on the screen for a prolonged
time. This may cause image retention. Use a screensaver if
possible.
NOTE
When connecting the power cord to the outlet, use a
grounded (3-hole) power strip or a grounded power outlet.
The monitor may flicker when turned on in an area where
the temperature is low. This is normal.
Sometimes red, green, or blue spots may appear on the
screen. This is normal.
Connecting to a PC
This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to
your computer without having to reconfigure anything or
install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your PC to the
monitor. Connect your PC to the monitor using the HDMI
cable as shown in the illustration below.
NOTE
Make sure to use the supplied HDMI cable of the product.
Otherwise, this may cause the device to malfunction.
Use a certified cable with the HDMI logo attached. If you
do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI®/
TM
cable
- High-Speed HDMI®/
TM
cable with Ethernet
CAUTION
Connecting your PC to the monitor using the HDMI cable
may cause device compatibility issues.
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may
cause compatibility issues.
19
ENGLISH
DisplayPort Connection
Transmits digital video and audio signals from your PC to
the monitor. Connect the monitor to your PC using the
DisplayPort cable as shown in the illustration below.
DP OUT
NOTE
There may be no video or audio output depending on the
DP (DisplayPort) version of the PC.
Make sure to use the supplied DisplayPort cable of
the product. Otherwise, this may cause the device to
malfunction.
For using Mini DP to DP (Mini DisplayPort to DisplayPort)
cable, it is recommended that you use DisplayPort 1.2
cable.
Thunderbolt Connection
34UC98
You can connect your high-resolution display or high-
performance data device to the monitor via a Thunderbolt
( ) port. Connect your external device to the monitor using
the Thunderbolt cable as illustrated below.
(sold separately)
NOTE
The maximum data transmission rate of each port is
20 Gb/s.
Make sure to use a Thunderbolt ( ) certified cable.
Otherwise, this may cause the device to malfunction.
Thunderbolt ( ) is supported in such environments as
Windows 7, Windows 8.1, Windows 10 and Mac product.
In accordance with Mac products may not support the
recommended resolution or the some features.
The ability to set up dual monitors using the Thunderbolt ( )
and daisy-chaining technology depends on the performance of
your video card.
20
ENGLISH
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your
AV device to the monitor. Connect your AV device to the
monitor using the HDMI cable as shown in the illustration
below.
AV
NOTE
Make sure to use the supplied HDMI cable of the product.
Otherwise, this may cause the device to malfunction.
Use a certified cable with the HDMI logo attached. If you
do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI®/
TM
cable
- High-Speed HDMI®/
TM
cable with Ethernet
CAUTION
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may
cause compatibility issues.
Connecting Peripherals
USB Cable connection - PC
The USB port on the product functions as a USB hub.
NOTE
Make sure to install the most recent Windows OS service
pack before using the product.
Peripheral devices are sold separately.
A keyboard, mouse, or USB device can be connected to the
USB port.
Quick Charge is only available through the USB1 port.
When Quick Charge is set to On, data transmission
through the USB1 port is not available (e.g. connecting
your keyboard, mouse, or other USB storage devices to the
monitor). (Go to General > Quick Charge to set Quick
Charge to On or Off.)
The charging speed may vary depending on the device.
(sold separately)
CAUTION
Cautions When Using a USB Device
A USB device with an automatic recognition program
installed, or that uses its own driver, may not be
recognized.
Some USB devices may not be supported or may not work
properly.
It is recommended to use a USB hub or hard disk drive
with power supplied. (If the power supply is not adequate,
the USB device may not be recognized properly.)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

LG 34UC80 User manual

Category
LED displays
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI