SAMPLE SETTINGS
M117 FLANGER
POWER
The MXR Flanger is powered
by two 9-volt batteries (remove
bottom plate to install), an 18-volt
AC adapter such as the Dunlop
ECB004/ECB004E, or a DC Brick™
power supply.
DESCRIPTION
•Astapleoffunky’70ssounds,
fromjetplanetospaceeffects
•Numeroustweakable
parameters
•Doestheworkofaanger,
chorus, delay and more
MAY GALLOP
GENIUS OF
FLANGE
CHAINED EDDIE
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
1 MANUALknobcontrolsthe
degreeofphaseshifting
2 WIDTH knob controls the
intensityofthetimedelay
set by SPEED knob
3 SPEED knob controls the
speedoftimedelay
4REGEN.knobcontrolsthe
intensityoftheoveralleffect
5 FOOTSWITCH toggles
effecton/bypass(blue
LEDindicateson)
SPECIFICATIONS
InputImpedance 470kΩ
OutputImpedance 1kΩ
MaxInputLevel 5dBV
MaxOutputLevel 5dBV
NoiseFloor*
-98dBV
NoiseReduction 2:1ratio
Max Delay 12.8 ms
Rate Range 0.1 Hz to 10 Hz
Current Draw 39 mA
Power Supply 18 volts DC
*A-weighted
DIRECTIONS
•Runacablefromyourguitarto
theFlanger’sINPUTjackandrun
anothercablefromtheFlanger’s
OUTPUTjacktoyouramplier.
•Startwithallcontrolsat
12o’clock.
•Turntheeffectonbydepressing
thefootswitch.
•RotatetheMANUALcontrol
clockwise to emphasize higher
frequenciesorcounterclockwise
toemphasizelowerfrequencies.
•RotatetheWIDTHcontrol
clockwise to increase the
intensityofthetimedelayas
set by the SPEED control or
counterclockwise to decrease it.
•RotatetheSPEEDknob
clockwiseforafasterphase
effectorcounterclockwise
foraslowerphaseeffect.
•RotatetheREGEN.control
clockwise to increase the
overallintensityoftheeffector
counterclockwise to decrease it.