Intel SE7210TP1-E - Socket 478 ATX Server Motherboard User manual

Intel

®

Entry Server Board SE7210TP1-E

User Guide

Order Number: C49109-002

Disclaimers

Disclaimer

Information in this document is provided in connection with Intel

®

products. No license, express or implied, by estoppel or

otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions

of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating

to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability,

or infringement of any patent, copyright or other intellectual property right. Intel products are not designed, intended or

authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of

the Intel product could create a situation where personal injury or death may occur. Intel may make changes to

specifications and product descriptions at any time, without notice.

Intel server boards contain a number of high-density VLSI and power delivery components that need adequate airflow for

cooling. Intel’s own chassis are designed and tested to meet the intended thermal requirements of these components when

the fully integrated system is used together. It is the responsibility of the system integrator that chooses not to use Intel

developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of airflow

required for their specific application and environmental conditions. Intel Corporation can not be held responsible if

components fail or the server board does not operate correctly when used outside any of their published operating or non-

operating limits.

Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the

United States and other countries.

* Other names and brands may be claimed as the property of others.

.

Preface

iii

Preface

About this Manual

Thank you for purchasing and using the Intel

®

Entry Server Board SE7210TP1-E.

This manual is written for system technicians who are responsible for troubleshooting, upgrading,

and repairing this server board. This document provides a brief overview of the features of the

board/chassis, a list of accessories or other components you may need, troubleshooting information,

and instructions on how to add and replace components on the Intel Entry Server Board

SE7210TP1-E. For the latest version of this manual, refer to

http://www.support.intel.com/support/motherboards/server/SE7210TP1-E.

Manual Organization

Chapter 1 provides a brief overview of the Server Board SE7210TP1-E. In this chapter, you will

find a list of the server board features, photos of the product, and product diagrams to help you

identify components and their locations.

Chapter 2 provides instructions on adding and replacing components. Use this chapter for step-by-

step instructions and diagrams for installing or replacing components such as the memory,

processor, the battery, and other components.

Chapter 3 provides instructions on using the utilities that are shipped with the board or that may be

required to update the system. This includes how to navigate through the BIOS Setup screens, how

to perform a BIOS update, and how to reset the password or CMOS. Information about the specific

BIOS settings and screens is available in the Technical Product Specification. See “Additional

Information and Software” for a link to the Technical Product Specification.

Chapter 4 provides troubleshooting information. In this chapter, you will find BIOS error messages

and POST code messages. You will also find suggestions for performing troubleshooting activities

to identify the source of a problem.

Product Accessories

This server board is compatible with the following Intel

®

Server Chassis:

 SC5200 BRP

 SC5250-E

You may need or want to purchase one or more of the following accessory items for your server:

Processor, memory DIMMs, hard drive, floppy drive, CDROM or DVDROM drive, RAID

controller, operating system.

For information about which accessories, memory, processors, and third-party hardware have been

tested and can be used with your board, and for ordering information for Intel products, see

http://www.support.intel.com/support/motherboards/server/SE7210TP1-E/compat.htm

.

Preface

iv

Additional Information and Software

If you need more information about this product or information about the accessories that can be

used with this server board, go to this link to find the information below:

http://www.support.intel.com/support/motherboards/server/SE7210TP1-E/index.htm

 In-depth technical information about this product, including BIOS settings and chipset

information in the Intel

®

Server Board SE7210TP1-E Technical Product Specification.

 The latest product information

 Accessories or other Intel

®

server products

 Hardware (peripheral boards, adapter cards) and operating systems that have been tested with

this product

 Chassis that have been tested with this product

 Processors that have been tested with this product

 DIMMs that have been tested with this product

 Power budget for this product

 Software to manage your Intel Server

 Diagnostics testing software

 Firmware and BIOS updates

 System drivers

Safety Information

v

Safety Information

Before working with your server product, whether you are using this guide or any other

resource as a reference, pay close attention to the safety instructions.

Emissions Disclaimer

To ensure EMC compliance with your local regional rules and regulations, the final configuration

of your end system product may require additional EMC compliance testing. For more information

please contact your local Intel Representative.

See “Error! Hyperlink reference not valid.” for product Safety and EMC regulatory compliance

information. This is an FCC Class A device. Integration of it into a Class B chassis does not result

in a Class B device.

Intended Uses

This product was evaluated for use in servers that will be installed in offices, computer rooms, and

similar locations. Other uses require further evaluation.

EMC Testing

Before computer integration, make sure that the chassis, power supply, and other modules have

passed EMC testing using a server board with a microprocessor from the same family (or higher)

and operating at the same (or higher) speed as the microprocessor used on this server board.

Warnings

System power on/off: The power button DOES NOT turn off the system

AC power. To remove power from system, you must unplug the AC power

cord from the wall outlet. Make sure the AC power cord is unplugged before

you open the chassis, add, or remove any components.

Hazardous conditions, devices and cables: Hazardous electrical

conditions may be present on power, telephone, and communication cables.

Turn off the server and disconnect the power cord, telecommunications

systems, networks, and modems attached to the server before opening it.

Otherwise, personal injury or equipment damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can

damage disk drives, boards, and other parts. We recommend that you

perform all procedures in this chapter only at an ESD workstation. If one is

not available, provide some ESD protection by wearing an antistatic wrist

strap attached to chassis ground any unpainted metal surface on your

server when handling parts.

ESD and handling boards: Always handle boards carefully. They can

be extremely sensitive to ESD. Hold boards only by their edges. After

removing a board from its protective wrapper or from the server, place the

board component side up on a grounded, static free surface. Use a

conductive foam pad if available but not the board wrapper. Do not slide

board over any surface.

Safety Information

vi

Installing or removing jumpers: A jumper is a small plastic encased

conductor that slips over two jumper pins. Some jumpers have a small tab on

top that you can grip with your fingertips or with a pair of fine needle nosed

pliers. If your jumpers do not have such a tab, take care when using needle

nosed pliers to remove or install a jumper; grip the narrow sides of the

jumper with the pliers, never the wide sides. Gripping the wide sides can

damage the contacts inside the jumper, causing intermittent problems with

the function controlled by that jumper. Take care to grip with, but not

squeeze, the pliers or other tool you use to remove a jumper, or you may

bend or break the stake pins on the board.

Safety Cautions

Read all caution and safety statements in this document before performing any of the instructions.

See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at

http://www.support.intel.com/support/motherboards/server/SE7210TP1-E.

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor Sie eine

der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel-

Serverplatinen und -Servergehäusen auf der Ressourcen-CD oder unter

http://www.support.intel.com/support/motherboards/server/SE7210TP1-E.

重要安全指导

在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。参见 Resource

CD（资源光盘）和/或 http://www.support.intel.com/support/motherboards/server/SE7210TP1-

E. 上的

Intel Server Boards and Server Chassis Safety Information

（《Intel

服务器主板与服务器机箱安全信息》）。

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document

avant de suivre toute instruction. Consultez Intel Server Boards and Server Chassis Safety

Information sur le CD Resource CD ou bien rendez-vous sur le site

http://www.support.intel.com/support/motherboards/server/SE7210TP1-E.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar

cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en

el CD Resource y/o en http://www.support.intel.com/support/motherboards/server/SE7210TP1-E.

Contents

vii

Contents

Warnings .........................................................................................................v

1 Server Board Features................................................................................. 11

Server Board Connector and Component Locations ............................................................13

Internal Component Connections..........................................................................................14

Configuration Jumpers..........................................................................................................15

Back Panel Connectors.........................................................................................................16

Hardware Requirements.......................................................................................................17

2 Server Board Installations and Upgrades.................................................. 19

Before You Begin..................................................................................................................19

Tools and Supplies Needed..................................................................................................19

Installing and Removing Memory..........................................................................................19

Installing DIMMs...........................................................................................................19

Removing DIMMs.........................................................................................................20

Installing or Replacing the Processor....................................................................................21

Installing the Processor................................................................................................21

Removing the Processor..............................................................................................24

Installing a PCI Card.............................................................................................................24

Replacing the Backup Battery......................................................................................24

3 Server Utilities .............................................................................................. 27

BIOS Setup...........................................................................................................................27

Upgrading the BIOS..............................................................................................................28

Preparing for the Upgrade............................................................................................28

Upgrading the BIOS.....................................................................................................29

Changing the BIOS Language .....................................................................................30

Recovering the BIOS ............................................................................................................30

Manually Recovering the BIOS....................................................................................30

Clearing the Password..........................................................................................................31

Clearing the CMOS...............................................................................................................31

4 Troubleshooting........................................................................................... 32

Resetting the System............................................................................................................32

Problems following Initial System Installation .......................................................................32

First Steps Checklist.....................................................................................................32

Hardware Diagnostic Testing................................................................................................33

Verifying Proper Operation of Key System Lights........................................................33

Confirming Loading of the Operating System ..............................................................34

Specific Problems and Corrective Actions............................................................................34

Power Light Does Not Light..........................................................................................34

No Characters Appear on Screen................................................................................35

Characters Are Distorted or Incorrect...........................................................................35

System Cooling Fans Do Not Rotate Properly.............................................................36

Diskette Drive Activity Light Does Not Light.................................................................36

Contents

viii

CD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light ...............................36

Cannot Connect to a Server.........................................................................................37

Problems with Network.................................................................................................37

System Boots when Installing PCI Card.......................................................................38

Problems with Newly Installed Application Software....................................................38

Problems with Application Software that Ran Correctly Earlier....................................38

Devices are not Recognized under Device Manager (Windows* Operating System)..39

Hard Drive(s) are not Recognized................................................................................39

Bootable CD-ROM Is Not Detected..............................................................................39

LED Information ...........................................................................................................40

BIOS Error Messages...........................................................................................................41

BIOS POST Beep Codes.............................................................................................42

BIOS Recovery Beep Codes........................................................................................42

Regulatory and Compliance Information........................................................ 44

Product Regulatory Compliance ...........................................................................................44

Product Safety Compliance..........................................................................................44

Product EMC Compliance............................................................................................44

Product Regulatory Compliance Markings...................................................................45

Electromagnetic Compatibility Notices..................................................................................45

FCC (USA)...................................................................................................................45

Industry Canada (ICES-003)........................................................................................46

Europe (CE Declaration of Conformity)........................................................................46

Taiwan Declaration of Conformity................................................................................46

Korean RRL Compliance..............................................................................................47

Australia / New Zealand...............................................................................................47

Getting Help....................................................................................................... 48

Intel

®

Server Issue Report Form....................................................................... 49

Contents

ix

Figures

Figure 1. Intel

®

Server Board SE7210TP1-E.........................................................................11

Figure 2. Intel Server Board SE7210TP1-E Layout..............................................................13

Figure 3. Making Connections to the Server Board..............................................................14

Figure 4. Configuration Jumper Location..............................................................................15

Figure 5. Back Panel Connectors .........................................................................................16

Figure 6. Installing Memory..................................................................................................20

Figure 7. Installing the Processor in the Processor Socket..................................................21

Figure 8. Attaching the Heat Sink to the Processor.............................................................22

Figure 9. Attaching the Fan Heat Sink Clips to the Processor Socket..................................22

Figure 10. Attaching the Fan Heat Sink Clips to the Processor Socket................................23

Figure 11. Connecting the Processor Fan Cable to the Processor Fan Connector..............23

Figure 12. Replacing the Battery..........................................................................................25

Tables

Table 1. Server Board Features..................................................................................12

Table 2. Configuration Jumper [J1D1].........................................................................15

Table 3. NIC LEDs.......................................................................................................16

Table 4. Keyboard Commands....................................................................................27

Table 5. BIOS Error Messages....................................................................................41

Table 6. Beep Codes...................................................................................................42

Table 7. BIOS Recovery Beep Codes.........................................................................42

Table 8. Product Certification Markings.......................................................................45

Contents

x

Server Board Features

Intel Server Board SE7210TP1-E User Guide 11

1 Server Board Features

This chapter briefly describes the main features of Intel

®

Server Board SE7210TP1-E. This chapter

provides a photograph of the product, a list of the server board features, and diagrams showing the

location of important components and connections on the server board. This server board is

available in two options:

 The server board SE7210TP1 includes dual-channel Serial ATA, and dual-channel Parallel

ATA support. RAID 0 and 1 support is provided for Serial ATA drives.

 The server board SE7210TP1SCSI includes a single channel, Ultra320 SCSI controller:

Adaptec* AIC-7901.

The Server Board SE7210TP1-E is shown in the following picture.

Figure 1. Intel

®

Server Board SE7210TP1-E

Server Board Features

12 Intel Server Board SE7210TP1-E User Guide

Table 1 summarizes the major features of the server board.

Table 1. Server Board Features

Feature Description

Processors Support for an Intel

®

Pentium

®

4 processor in an mPGA478 package with a

800/533/400 MHz system bus

Memory

 Four 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets

 Support for up to 4 GB Unbuffered ECC system memory

 Support for single-sided or double-sided DIMMs (DDR266/333/400)

- To run DDR400 memory at full speed requires an Intel Pentium 4 processor with

800 MHz system bus frequency.

- To run DDR333 memory at full speed requires an Intel Pentium 4 processor with

533 MHz system bus frequency. DDR333 memory will run at 320 MHz frequency

when using an Intel Pentium 4 processor with system bus frequency of 800 MHz.

- DDR266 memory may only be used with an Intel Pentium 4 processor with 400

MHz or 533 MHz system bus frequency.

Chipset Intel

®

827210 chipset, consisting of:

 Intel

®

827210 Memory Controller Hub (MCH)

 Intel

®

6300ESB I/O Controller Hub

 Intel

®

82802AC 8 Megabit Firmware Hub (FWH)

I/O Control Winbond* W83627HF-AW LPC Bus I/O controller chip

Peripheral Interfaces

 Three external USB 2.0 ports on the back panel with an additional internal

header, which provides support for one additional USB port for front panel

support (four total possible USB 2.0 ports)

 One serial port and one serial header

 Two IDE interfaces with Ultra 33, 66 and 100 DMA mode

 Two Serial ATA connectors with support for RAID 0 and 1

 One floppy drive interface with support for one drive

 PS/2

*

keyboard and mouse ports

LAN

 One Intel® 82547EI Platform LAN Connect (PLC) device for 10/100/1000

Mbits/second Ethernet LAN connectivity

 One Intel® 82551QM device for 10/100 Mbits/second Ethernet LAN connectivity

Expansion

Capabilities

Two independent PCI buses (one 32-bit, 33 MHz, 5 V; one 64-bit, 66 MHz, 5V) with

four bus connectors:

 Three PCI-X 64-bit PCI slots

 One 32-bit PCI slot

Integrated Capabilities

 Integrated 2D/3D graphics controller: ATI* Rage* XL Video Controller with 8 MB

of SDRAM

 Single channel, Ultra 320 SCSI controller (only available on server board

SE7210TP1SCSI): Adaptec* AIC-7901

Fans Support for up to six system fans and one processor fan

BIOS Intel/AMI BIOS with support for:

 Advanced Configuration and Power Interface (ACPI)

 8 megabit symmetrical flash memory

 Support for SMBIOS

continued

Server Board Features

Intel Server Board SE7210TP1-E User Guide 13

Server Board Features (continued)

Power Management Support for ACPI:

 Suspend to RAM (STR)

 Wake on USB, PCI, RS-232, PS/2, LAN, and front panel

Server Management

Intel

®

Server Management 5.8 support via mini Baseboard Management

Controller (mBMC)

Server Board Connector and Component Locations

K

M

AA

BB

CC

DD

EE FF

GG

HH

II

JJ

KK

LL

MM

NN

OO

PP

QQ

RR

SS

TT

UU

VV

WWXXYYZZAAAA

BBBB

CCFF

DDGG

EEHH

FFII

GGJJ

HHKK

IILL

TP00507

CC

DD

EE

A: Serial B Header

B: CPU Fan Header

C: Sys Fan Header 3

D: +12 V CPU Power Connector

E: Sys Fan Header 4

F: Processor Socket

G: DIMM 2B Socket

H: DIMM 2A Socket

I: DIMM 1B Socket

J: DIMM 1A Socket

K: Sys Fan Header 1

L: Sys Fan Header 2

M: Front Panel USB Header

N: Aux Power Connector

O: Main Power Connector

P: Secondary IDE Connector

Q: Primary IDE Connector

R: Floppy Connector

S: Battery

T: Front Panel Connector

U: Hot Swap Backplane Header

V: SCSI LED Header

W: SATA-A1 Connector

X: SATA-A2 Connector

Y: Sys Fan Header 6

Z: Sys Fan Header 5

AA: Jumper Block

BB: Chassis Intrusion Header

CC: PCI-X Slot 1, 64/66 RAIDIOS

DD: PCI-X Slot 2, 64/66

EE: PCI-X Slot 3, 64/66

FF: PCI Slot 6, 32/33

GG: NIC 2 (10/100 Mbit)

HH: NIC 1 (1 Gbit)

II: Video Connector

JJ: Serial A Connector

KK: Keyboard and Mouse

LL: USB Connectors

Figure 2. Intel Server Board SE7210TP1-E Layout

Server Board Features

14 Intel Server Board SE7210TP1-E User Guide

Internal Component Connections

The connections you make depend on the chassis you are installing the board into and the

components you are installing. You may not need to make all of the connections shown in Figure

3.

If your Server Board SE7210TP1-E is installed into the Server Chassis SC5250-E, make sure the

hard drive cage is installed before making your connections. This is necessary because the hard

drive cage contains one of the front system fans.

A

T

BA

S

B

R

CD

M

E

N

F

G

H

I

U

J

K

WLXMNO

P

TP00507

12 V

A

T

A

1

0

Serial ATA

Q

Figure 3. Making Connections to the Server Board

A: CPU1 Fan Connector

B: +12V CPU Power Connector

C: System Fan Header 2

D: System Fan Header 1

E: Front USB Header

F: Auxiliary Power Connector

G: Main Power Connector

H: Floppy Connector

I: Front Panel Connector

J: Hot-swap Backplane Headers

K: HDD LED

L: SATA Port A1

M: SATA Port A2

N: System Fan Header 6

O: System Fan Header 5

P: Chassis Intrusion Header

Q: IDE Connectors

R: System Fan Header 4

S: System Fan Header 3

T: Serial B Header

Server Board Features

Intel Server Board SE7210TP1-E User Guide 15

Configuration Jumpers

Figure 4. Configuration Jumper Location

Table 2. Configuration Jumper [J1D1]

Jumper Name Pins What happens at system reset…

CMOS clear 2-3 If these pins are jumpered, the CMOS settings will be cleared on the next

reset.

These pins should be jumpered on 1-2 for normal operation.

Password Clear 6-7 If these pins are jumpered, administrator and user passwords will be cleared

on the next reset.

These pins should be jumpered on 5-6 for normal operation.

BIOS Flash

Write Protect

11-12 If these pins are jumpered, it is possible to update the BIOS Boot Block code.

These pins should be jumpered on 10-11 for normal operation and for normal

BIOS operational updates.

BIOS Recovery 14-15 If these pins are jumpered, the system will attempt to recover the BIOS by

loading the BIOS code into the flash device from a floppy disk. This jumper is

typically only used when the BIOS has become corrupted.

These pins should be jumpered on 13-14 for normal operation.

J1D1

12356791011131415

TP00630

Server Board Features

16 Intel Server Board SE7210TP1-E User Guide

Back Panel Connectors

TP00508

AB C D EF

A. USB 1, 2, 3

B. Keyboard/mouse

C. Serial port A

D. Video

E. NIC1 (1Gbit)

F. NIC2 (10/100 Mbit)

Figure 5. Back Panel Connectors

The NIC LEDs at the right and left of each NIC provide the following information.

Table 3. NIC LEDs

NIC LED Color LED State Description

Off 10 Mbps connection (if right LED is on)

Left LED

Solid Green 100 Mbps connection

On Network connection in place

NIC2 (10/100 Mbit)

Right LED

Blinking Green Transmit/receive activity

Off No network connection

Solid Amber Network connection in place

Left LED

Blinking Amber Transmit/receive activity

Off 10 Mbps connection (if left LED is on or

blinking)

Solid Amber 100 Mbps connection

NIC1 (Gigabit)

Right LED

Solid Green 1000 Mbps connection

Server Board Features

Intel Server Board SE7210TP1-E User Guide 17

Hardware Requirements

To avoid integration difficulties and possible board damage, your system must meet the

requirements outlined below. For a list of qualified components see the links under “Additional

Information and Software.”

Processor

A minimum of one 2.0 GHz Intel Pentium 4 processor with 512KB cache support is required. For a

complete list of supported processors, see the links under “Additional Information and Software.”

Memory

A minimum of one 128 MB Unbuffered, ECC or non-ECC, DDR266-, DDR333- or DDR400-

compliant, 184-pin DIMMs.

All memory components and DIMMs used with the server board SE7210TP1-E must comply with

the DDR specifications.

For best performance and dual-channel interleave operation, a minimum of two DIMMs must be

installed and the DIMMs must be populated as follows:

 DIMM1A and DIMM 1B: Populate these two sockets together first

 DIMM 2A and DIMM 2B: Populate these sockets in addition to DIMM 1A and DIMM 2A if

four DIMMs are to be used

 When four DIMMs are installed, the system will use dual-channel interleave. For single-

channel memory, a single DIMM can be installed in socket DIMM 1A.

For a complete list of supported memory DIMMs, see the links under “Additional Information and

Software.”

✏

NOTES

Although the server board architecture allows the user to mix various sizes of

DIMMs between channels, DIMMs must be identical within each bank.

To be fully compliant with all applicable DDR SDRAM memory

specifications, the board should be populated with DIMMs that support the

Serial Presence Detect (SPD) data structure. This allows the BIOS to read the

SPD data and program the chipset to accurately configure memory settings

for optimum performance. If non-SPD memory is installed, the BIOS will

attempt to correctly configure the memory settings, but performance and

reliability may be impacted or the DIMMs may not function under the

determined frequency.

For ECC functionality, all installed DIMMs must be ECC. If both ECC and

non-ECC DIMMs are used, ECC will be disabled and will not function.

Power Supply

A minimum of 450 Watts is required. Your supply must provide a minimum of 1.2 A of 5 V standby

current or the board will not boot.

Server Board Features

18 Intel Server Board SE7210TP1-E User Guide

Server Board Installations and Upgrades

Intel Server Board SE7210TP1-E User Guide 19

2 Server Board Installations and Upgrades

Before You Begin

Before working with your server product, pay close attention to the Safety Information at the

beginning of this manual.

Tools and Supplies Needed

 Phillips

*

(cross head) screwdriver (#1 bit and #2 bit)

 Needle nosed pliers

 Antistatic wrist strap and conductive foam pad (recommended)

Installing and Removing Memory

The silkscreen on the board for the DIMMs displays DIMM1A, DIMM2A, DIMM1B, and

DIMM2B, starting from the inside of the board. DIMM1A is the socket closest to the processor

socket.

Installing DIMMs

To install DIMMs, follow these steps:

1. Observe the safety and ESD precautions at the beginning of this book.

2. Turn off all peripheral devices connected to the server. Turn off the server.

3. Disconnect the AC power cord.

4. Remove the chassis cover and locate the DIMM sockets (see Figure 6).

Server Installations and Upgrades

20 Intel Server Board SE7210TP1-E User Guide

TP00518

1

3

2

3

1A

1B

2A

2B

Figure 6. Installing Memory

5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open

position.

6. Holding the DIMM by the edges, remove it from its anti-static package.

7. Position the DIMM above the socket. Align the small notch in the bottom edge of the DIMM

with the keys in the socket (see inset in Figure 6).

8. Insert the bottom edge of the DIMM into the socket.

9. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips

snap into place. Make sure the clips are firmly in place.

10. Replace the server’s cover and reconnect the AC power cord.

Removing DIMMs

To remove a DIMM, follow these steps:

1. Observe the safety and ESD precautions at the beginning of this chapter.

2. Turn off all peripheral devices connected to the server. Turn off the server.

3. Remove the AC power cord from the server.

4. Remove the server’s cover.

5. Gently spread the retaining clips at each end of the socket. The DIMM pops out of the socket.

6. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package.

7. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.

8. Replace the server’s cover and reconnect the AC power cord.

Page is loading ...

Intel SE7210TP1-E - Socket 478 ATX Server Motherboard User manual

This manual is also suitable for

Intel SE7210TP1-E - Socket 478 ATX Server Motherboard User manual

Related papers

Other documents