Graco 344834EN-A User manual

Category
Paint Sprayer
Type
User manual
Bellows Pumps
The Newest Technology in Piston Pumps
Applications
• Catalyzed coatings
Varnish and lacquer
• High solid coatings
Abrasive materials
Solvent and waterborne materials
Moisture-sensitive materials
UV-cure coatings
Flat line machine lines
General finishing applications where open
wet cups are not preferred
Operator Control Panel
Air controls located at operator height
for easy setting and monitoring
DataTrak
Easy-to-set runaway protection
Pump diagnostics for maintenance
Resettable batch counter tracks material
usage and maintenance schedule
The gentle pumping action of the
Merkur Bellows Pump, combined with
reduced sealing surfaces, provides
superior handling of shear-sensitive
materials, including UV coatings and
waterborne materials.
Merkur
Bellows
Time (1/1000 sec)
Merkur
Competitor
1800 2000 2200 2400 2600 2800 3000
M
C
Quick changeover and recovery minimizes
pulsation and creates an even film thickness
Longer changeover and pressure spike creates
inconsistent finish
M
C
Less Pulsation
for Better Results
Merkur is designed to provide
a smooth, rapid changeover for
a better, more consistent finish
and less user fatigue.
Merkur Air Motor Technology
• Highest technology air motor on the market
• Low air consumption for increased efficiency
• Simple air motor design and minimal parts
reduces repair time
Leak Proof Pump Lower
• Easy-to-flush design allows for fast color changes
and reduced material waste
• 300 series stainless steel pump construction
provides long-lasting durability
• Fewer parts and online replacement bellows seal
means improved serviceability, lower cost of
ownership and reduced downtime
1. Air Valve
Provides smooth and rapid changeover
2. Quick Removal Coupler
Allows for easy disassembly of the pump lower
from the air motor
3. Rotatable Inlet Fitting
Inlet can be rotated 360 degrees for
easy access
4. Improved Bellows Seal Design
Eliminates throat seal leakage and lubrication
5. Overflow Chamber (Optional)
D-shaped seal and overflow chamber
contains the material within the pump
in case of bellows leakage
6. Throat and Piston Packings
• Spring-loaded to maintain long packing
life – no adjustments needed
• Available with V-Packing seals for abrasives
or U-Cup seals for UV coatings
Inlet Fitting
Overflow Chamber
Bellows Seal
Packings
3
Air Valve
Quick Removal Coupler
4
2
1
6
5
Powerful Capabilities in a Unique Piston Pump
Known for its robust design, the Glutton
pump features a bellows seal that
virtually eliminates the possibility of air
or moisture contaminating the fluid.
Choose the heavy-duty Glutton when
no other pump can handle the job!
Applications
Air spray and HVLP supply
Circulating systems
Catalyzed coatings
Varnish and lacquer
High solid coatings
Abrasive materials
Solventborne and waterborne fluids
Moisture sensitive materials
UV-cure coatings
Flatline machine lines
General finishing applications where open
wet cups are not preferred
Glutton
®
Bellows
Compact Design
1. Vertical Ball Check
• Reversible seats for uniform wear and long service life
External check allows for quick maintenance for materials
that pack or mat out easily
2. External Air Valve
Easy installation and maintenance
3. Outlet Manifold
Simplifies plumbing and installation
4. Pump Stand
Included for easy mounting
5. Cylinder and Displacement Rod
Designed to handle a broad range of coatings
6. Piston Seal
Multiple configurations for material compatibility
7. Heavy-Duty Bellows Seal (Optional)
• Designed for longer life in abrasive applications
8. Carbide Seat Accessory
Ideal for abrasive materials
Pump Stand
Outlet Manifold
External Air Valve
Piston Seal
Vertical Ball Check
Cylinder and
Displacement Rod
4
3
2
6
1
5
The Heavy-Duty, Low Maintenance Solution
Carbide Seat
8
Bellows Seal
7
Package Description:
Pump: Package includes pump, pump only air controls. Siphon tube, hoses, and guns are not included.
AA: Air-Assisted Airless package includes pump, pump and gun air controls, G15 or G40 guns, fluid hose, gun fluid hose,
gun air hose, 5 gallon (19 l) pail suction hose and tube
AL: Airless
package includes pump, pump air controls, XTR
gun, fluid hose, gun fluid hose, 5 gallon (19 l) pail suction hose and tube
ES: Electrostatic package includes pump, pump and gun air controls, PRO AA Xs4 Smart Gun, fluid hose, gun fluid hose,
gun air hose, 5 gallon (19 l) pail suction hose and tube
Ratio 5:1 12:1 15:1 15:1 23:1 24:1 25:1 35:1
Pump Volume per Cycle 150 cc 100 cc 50 cc 150 cc 100 cc 150 cc 50 cc 100 cc
Air Motor Displacement 400 cc 700 cc 400 cc 1200 cc 1200 cc 1800 cc 700 cc 1800 cc
Maximum Fluid Outlet Pressure
500 psi
(35 bar)
1200 psi
(83 bar)
1500 psi
(103 bar)
1500 psi
(103 bar)
2300 psi
(158 bar)
2400 psi
(165 bar)
2500 psi
(172 bar)
3500 psi
(241 bar)
Maximum Air Inlet Pressure
100 psi
(7 bar)
100 psi
(7 bar)
100 psi
(7 bar)
100 psi
(7 bar)
100 psi
(7 bar)
100 psi
(7 bar)
100 psi
(7 bar)
100 psi
(7 bar)
Fluid Flow @ 60 cpm
2.4 gpm
(9.0 lpm)
1.6 gpm
(6.0 lpm)
0.8 gpm
(3.0 lpm)
2.4 gpm
(9.0 lpm)
1.6 gpm
(6.0 lpm)
2.4 gpm
(9.0 lpm)
0.8 gpm
(3.0 lpm)
1.6 gpm
(6.0 lpm)
Air Consumption @ 100 psi
(7 bar) @ 20 cpm
6 scfm
(0.17 m3/min)
9 scfm
(0.17 m3/min)
6 scfm
(0.17 m3/min)
17 scfm
(0.48 m3/min)
17 scfm
(0.48 m3/min)
26 scfm
(0.74 m3/min)
9 scfm
(0.17 m3/min)
26 scfm
(0.74 m3/min)
Fluid Inlet Size 1" npt(m) 3/4" npt(m) 3/4" npt(m) 1" npt(m) 3/4" npt(m) 1" npt(m) 3/4" npt(m) 3/4" npt(m)
Fluid Outlet Size 3/4" npt(m) 3/8" npt(m) 3/8" npt(m) 3/4" npt(m) 3/8" npt(m) 3/4" npt(m) 3/8" npt(m) 3/8" npt(m)
Air Inlet (Air Controls) 3/8" npt(f) 3/8" npt(f) 3/8" npt(f) 3/8" npt(f) 3/8" npt(f) 3/8" npt(f) 3/8" npt(f) 3/8" npt(f)
Seal
Mount
Package
Drain
Valves
Fluid
Filter
DataTrak
V-Packing
Wall
Pump
G05B01 G12B01 G15B01 G15B51 G23B01 G24B01 G25B01 G35B01
G05B02 G12B02 G15B02 G15B52 G23B02 G24B02 G25B02 G35B02
G05B05 G12B05 G15B09 G15B59 G23B09 G24B09 G25B09 G35B09
G05B06 G12B06 G15B10 G15B60 G23B10 G24B10 G25B10 G35B10
AA
G15B03 G15B53 G23B03 G24B03 G25B03 G35B03
G15B04 G15B54 G23B04 G24B04 G25B04 G35B04
G15B11 G15B61 G23B11 G24B11 G25B11 G35B11
G15B12 G15B62 G23B12 G24B12 G25B12 G35B12
Cart
Pump
G05B03 G12B03 G15B05 G15B55 G23B05 G24B05 G25B05 G35B05
G05B04 G12B04 G15B06 G15B56 G23B06 G24B06 G25B06 G35B06
G05B07 G12B07 G15B13 G15B63 G23B13 G24B13 G25B13 G35B13
G05B08 G12B08 G15B14 G15B64 G23B14 G24B14 G25B14 G35B14
AA
G15B07 G15B57 G23B07 G24B07 G25B07 G35B07
G15B08 G15B58 G23B08 G24B08 G25B08 G35B08
G15B15 G15B65 G23B15 G24B15 G25B15 G35B15
G15B16 G15B66 G23B16 G24B16 G25B16 G35B16
AL
G23B35 G24B35 G25B33 G35B35
G23B36 G24B36 G25B34 G35B36
ES
G15B83 G23B33 G24B33 G35B33
G15B84 G23B34 G24B34 G35B34
U-Cup
Wall
Pump
G05B09 G12B09 G15B17 G15B67 G23B17 G24B17 G25B17 G35B17
G05B10 G12B10 G15B18 G15B68 G23B18 G24B18 G25B18 G35B18
G05B13 G12B13 G15B25 G15B75 G23B25 G24B25 G25B25 G35B25
G05B14 G12B14 G15B26 G15B76 G23B26 G24B26 G25B26 G35B26
AA
G15B19 G15B69 G23B19 G24B19 G25B19 G35B19
G15B20 G15B70 G23B20 G24B20 G25B20 G35B20
G15B27 G15B77 G23B27 G24B27 G25B27 G35B27
G15B28 G15B78 G23B28 G24B28 G25B28 G35B28
Cart
Pump
G05B11 G12B11 G15B21 G15B71 G23B21 G24B21 G25B21 G35B21
G05B12 G12B12 G15B22 G15B72 G23B22 G24B22 G25B22 G35B22
G05B15 G12B15 G15B29 G15B79 G23B29 G24B29 G25B29 G35B29
G05B16 G12B16 G15B30 G15B80 G23B30 G24B30 G25B30 G35B30
AA
G15B23 G15B73 G23B23 G24B23 G25B23 G35B23
G15B24 G15B74 G23B24 G24B24 G25B24 G35B24
G15B31 G15B81 G23B31 G24B31 G25B31 G35B31
G15B32 G15B82 G23B32 G24B32 G25B32 G35B32
Note: Graco recommends 20 cpm or less for intermittent pumping applications and 12 cpm or less for continuous pumping applications.
Merkur Bellows Ordering Information
Spray Guns
Refer to the spray gun brochure for additional model numbers.
All guns include tip of choice.
24C853 G15 Carbide Air-Assisted Spray Gun
24C855 G40 Air-Assisted Spray Gun
24C857 G40 RAC Air-Assisted Spray Gun
XTR501 XTR-5 Airless Spray Gun
244573 PRO Xs AA Smart Electrostatic Spray Gun
Accessories
238926 Back Pressure Regulator
102397 Fluid Gauge
3000 psi (206 bar, 20.6 MPa)
238890 Fluid Regulator
243340 Pail Cover with Agitator
Use to agitate material in a 5 gal (18.9 l) pail
222121 Fluid Regulator, Stainless Steel
Maximum working pressure: 1500 psi (103 bar, 10.3 MPa)
Regulator range: 150-1200 psi (10-28 bar, 1-8.2 MPa)
24A587 Pump Outlet Fluid Filter, Stainless Steel
60 mesh (250 micron), 5000 psi (350 bar, 25 MPa)
256425 Fluid Filter Drain Valve, Stainless Steel
5000 psi (350 bar, 35 MPa)
224458 Replacement Filter Screen Element
3-pack elements, 30 mesh, SST
224459 Replacement Filter Screen Element
3-pack elements, 60 mesh, SST
24A540 Air Control Gauge Covers
5 sheets of 10 covers
24B187 Second AA Gun Kit
Includes air regulator and gauge
239850 Heater 120 (v)
239851 Heater 240 (v)
24E298 Overflow Chamber Kit
DataTrak
24A575 Upgrade Kit for 400 cc Air Motors
24A576 Upgrade Kit for 700 cc, 1200 cc and 1800 cc Air Motors
24A592 Upgrade Kit for DataTrak with Cycle Count Only
Suction Hoses
24A954 55 gal (208 l) Drum Suction Hose and Strainer, 3/4 in fluid inlet
24B598 55 gal (208 l) Drum Suction Hose and Strainer, 1 in fluid inlet
24B424 PTFE Lined Suction Hose for 5 gal (19 l) Pails and Strainer, 3/4 in inlet
24B425 PTFE Lined Suction Hose for 5 gal (19 l) Pails and Strainer, 1 in inlet
Gun Hoses
256390 25 ft Air Hose
241812 25 ft Fluid Hose: 3300 psig (228 bar)
24A955 50 ft Bundled Air and Fluid Hose: 3300 psig (228 bar)
256389 50 ft Air Hose
24B562 50 ft Fluid Hose: 3300 psig (228 bar)
24A588 Hose Clips: Pack of 10
PTFE Seals
24J858* Reinforced PTFE V-Packing Kit for 50 cc Displacement Pump
24J859* Reinforced PTFE V-Packing Kit for 100 cc Displacement Pump
24J860* Reinforced PTFE V-Packing Kit for 150 cc Displacement Pump
24J850* PTFE Bellows Kit for 50 cc Diplacement Pump
24J851* PTFE Bellows Kit for 100 cc and 150 cc Displacement Pump
Instruction and Parts Manuals
312799 Merkur Bellows AA and Airless Spray Package
312798 Merkur Electrostatic Spray Package
312795 Merkur Bellows Pump Assembly
312793 Merkur Bellows Displacement Pump
312796 Merkur Air Motor
* Use with materials that cause chemical compatibility concerns with UHMWPE,
such as acid catalyst materials
Accessories
206221 Glutton Wall Bracket
102969 Loctite® High Strength Sealant
To secure piston shafts to the piston stud.
223319 Return Tube Kit for returning circulated fluid back to a 55 gal drum
Includes SST return tube, SST bushing and SST elbow
208259 55 Gallon (200 Liter) Suction Kit
Suction hose (3/4 in ID x 6 ft (1.8 m)), elbow, bung adapter, riser tube,
3/4 in npt(f) outlet fitting.
204385 Elevator with Fixed Mounting
Use with 237949 and 237579 to raise and lower pump when changing drums
237949 Stainless Steel Drum Cover Kit (55 gal)
Includes SST drum cover, agitator gasket, access hole plug and fasteners
237579 Air Control Kit for 204385 elevator to raise and lower drum cover
222345 Air Filter/Regulator/Lubricator Kit
Replacement Parts
220656 Air Valve and Pilot Valve Repair Kit
24C134 Piston Seals and Bellows Kit – UHMWPE
24C135 Piston Seals and Bellows Kit – Nylon
220658 Piston Seal Kit – Urethane
221134 Carbide Ball and Seat Kit (2 each)
189432 Fluid Piston – SST
686499 Fluid Piston – Ceramic
Merkur Bellows Accessories
Glutton Bellows Ordering Information and Accessories
Technical Specifications
Ratio Glutton 4:1
Output per cycle 355 cc
Max working pressure 400 psi (28 bar)
Max air input pressure 100 psi (7 bar)
Output at 60 cpm 5.6 gpm (21.2 lpm)
Pump inlet size 1.25 npt(f)
Pump outlet size 1 npt(f)
Pump manual 307843
Pump Construction
Material Seals Glutton 4:1
CS Nylon 237008
CS UHMWPE 220663
SST Nylon 237011
SST UHMWPE 220666
ABOUT GRACO
GRACO LOCATIONS
SALES/
DISTRIBUTION/
SERVICE
North America
Customer Service
800-328-0211
Fax 877-340-6427
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
Graco Inc. is registered to I.S. EN ISO 9001
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612-623-6000
Fax: 612-623-6777
AMERICAS
MINNESOTA
Worldwide Headquarters
Graco Inc.
88 -11th Avenue N.E.
Minneapolis, MN 55413
CHINA
Graco Hong Kong Ltd.
Shanghai Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, 200233
The People’s Republic of China
Tel: 86 21 649 50088
Fax: 86 21 649 50077
KOREA
Graco Korea Inc.
Shinhan Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-si, Korea 431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
EUROPE
BELGIUM
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32 89 770 700
Fax: 32 89 770 777
Call today for product information or to request a demonstration.
877-84GRACO (1-877-844-7226) or visit us at www.graco.com.
ASIA PACIFIC
AUSTRALIA
Graco Australia Pty Ltd.
Suite 17, 2 Enterprise Drive
Bundoora, Victoria 3083
Australia
Tel: 61 3 9467 8558
Fax: 61 3 9467 8559
INDIA
Graco Hong Kong Ltd.
India Liaison Office
Room 432, Augusta Point
Regus Business Centre 53
Golf Course Road
Gurgaon, Haryana
India 122001
Tel: 91 124 435 4208
Fax: 91 124 435 4001
JAPAN
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81 45 593 7300
Fax: 81 45 593 7301
©2011 Graco Inc. 344834 Electronic Copy Only. All written and visual data contained in this document are based on the latest product information available
at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification
purposes and are trademarks of their respective owners.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Graco 344834EN-A User manual

Category
Paint Sprayer
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI