Fujitsu FTP-628MCL053, FTP-628MCL054 User manual

  • Hello! I am an AI chatbot trained to assist you with the Fujitsu FTP-628MCL053 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
FTP-628MCL053/054
OVERVIEW
The FTP-628 MCL Series are battery driven high-speed
ultracompact printers with a 2-inch paper width equivalent.
Paper can be easily set using our unique platen release
mechanism.
The FTP-628 MCL Series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, banking terminals, and measurement
and medical equipment.
HIGHLIGHTS
Ultra compact
Height 15.5 mm, width 69.6 mm, depth 34.3 mm
High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
High resolution printing / Kanji supported
8 dots/mm of resolution printing is possible.
Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
Two types of paper routes
Front or bottom feed, depending on the paper route.
Easy mounting
Wiring for the head, motor, sensor are housed within one
flexible cable (053, 054) or in two cables (051, 052). The
mechanism can be secured by one hook and two screws at
two locations, making mounting easy.
BATTERY DRIVEN, FTP-608 Series
2” HIGH SPEED THERMAL PRINTER
2
FTP-628MCL053/054
PART NUMBERS
SPECIFICATIONS
Part number FTP-628MCL053/054
Printing method Thermal-line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Number of columns ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm
+0
Paper thickness 60 to 100 µ m (some paper in this range may not be used because of
paper characteristics)
Printing Speed Maximum 60mm/sec. (480 dot line/sec.) at 8.5V
Alphanumeric, katakana: 159 types
International and special characters: 195 types
JIS Kanji level 1, level 2, non-Kanji
(supported only by FTP-628DSL228, DCL208): about 6800 types
12 × 24 dots, (1.54 × 3.0 mm), 32 columns: alphanumeric, katakana
24 × 24 dots, (3.0 × 3.0 mm), 16 columns: alphanumeric, katakana, Kanji
8 × 16 dots, (1.0 × 2.0 mm), 48 columns: alphanumeric, katakana
16 × 16 dots, (1.0 × 2.0 mm), 24 columns: alphanumeric, katakana, Kanji
SpecificationsItem
Character types
Character, dimensions (W×H), number of
columns
-1
rebmuNtraP
msinahcemretnirP
)bonkdnahctiwsnoitcetednepodaehhtiwnoitresnirepaptnorf(350LCM826-PTF
)hctiwsnoitcetednepodaehhtiwnoitresnirepapmottob(450LCM826-PTF
gnivirdrofISL(103UC826-PTF)ylnoKNA
ecafretnI
draoB
lellaraP)scinortneC(003LCD826-PTF
laireS)C232SR(laireS503LSD826-PTF
ecafretnI
selbac
lellaraP202Y826-PTF
laireS203Y826-PTF
rewoP
elbac
,daeH
rotom
204Y826-PTF
3
FTP-628MCL053/054
SPECIFICATIONS
metInoitacificepS
ecafretnI scinortneC/C232SRotsmrofnoC
rewoP
ylppus
daehtnirproF
eulavkaepA)39.0(78.0,tnerrucegarevaCDV5.8-2.4
)V2.7ta.ces/mm05:deepstnirp,%5.21:oitartnirp(
rotomroF
mumixamA1,CDV5.8-2.4
gnidaolrepapcitamotuarofdednemmocersiV5.8ot8.5:etoN
cigolroFmumixamA1.0,%5±CDV5
snoisnemiD
msinahcemretnirP)HxDxW(mm5.51x3.43x3.27
draobecafretnImm51x25x3.96
thgieW
msinahcemretnirP)bonktuohtiw(g74yletamixorppA
draobecafretnIg02yletamixorppA
efildaeH
dradnatsruorednu(tod/seslupnoillim001:ecnatsiseresluP
)snoitidnoc
:oitartnirp(mk05ecnatsidgnilevartrepap:ecnatsisernoisarbA
)sselro%52
gnitarepO
tnemnorivne
*erutarepmetgnitarepOC˚05+otC˚0
ytidimuhgnitarepO)noitasnednocon(HR%58ot02
erutarepmetegarotS)dedulcnitonrepap(C˚06+otC˚02-
ytidimuhegarotS)noitasnednocon(HR%59ot5
noitceteD
noitcnuf
erutarepmetdaeH
noitceted
rotsimrehtybdetceteD
noitcetedkram/tuorepaPretpurretni-otohpybdetceteD
noitcetedpudaeHhctiws-orcimybdetceteD
repapevitisneslamrehtdednemmoceR
repaPevitisneShgiH)repaPnoppiN(4E-SK05FT
:repapdradnatS)repaPnoppiN(E-SK06FT
)mm85(100UP020-PTF
)repaPijO(R501DP
)mm85(1070P020-PTF
repaPefiLmuideM1F-SK06FT
)mm85(2010P020-PTF
)repaPijO(R071DP
ihsibustiM1-BBV022P
)repaP
repaPefiLgnoL)repaPijO(N-R061DP
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
4
FTP-628MCL053/054
DIMENSIONS
1. Printer mechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-628MCL054
FTP-628MCL053
2. Interface board
Unit: mm
5
FTP-628MCL053/054
Connector (FPC) specification
(1)Connector
Mechanical unit side: FPC connector
Remote side (housing site): 52030-3090 (made by Molex)
(2) Pin assignment on the mechanical side
oNlangiSO/IstnetnoC
1KHP— rotpurretniotohprofedohtaC
2NESVIrewoprosnesrepap
3EHPO rotpurretniotohprofrottimE
41WSO hctiwsesaelernetalP
52WSIhctiwsesaelernetalP
6HVI
rewopevirddaeH
7HVI
8IDIniataD
9KLCI noitacinummocrofkcolcsuonorhcnyS
01DNG—
daehlamrehtrofylppusrewopdnuorG
11DNG—
216BTSI
langislortnocgnizigrenedaehlamrehT315BTSI
414BTSI
51DDVIrewopcigoL
61MTO 1lainmrettupnirotsiserevitisnesyllamrehT
71MTO 2lainmrettupnirotsiserevitisnesyllamrehT
813BTSI
langislortnocgnizigrenedaehlamrehT912BTSI
021BTSI
12DNG—
daehlamrehtrofylppusrewopdnuorG
22DNG—
32TALIhctalataD
42ODOtuoataD
52HVI
daehlamrehtrofylppusrewoP
62HVI
72A/TMI
langisnoitaticxerotomgnippetS
82A/TMI
92B/TMI
03B/TMI
6
FTP-628MCL053/054
FUNCTION OF INTERFACE BOARD
metImetI
.1noitcnuftnirptseT.8noitcnufgnivasrewoprotoM
.2noitcetedtuorepaP.9noitcnufnoitcetedkraM
.3noitceteddneraenrepaP.01noitcetedytilamronbanoitarepoUCM
.4noitcetedneponetalP.11noitcetorpecneuqesFFO/NOrewoP
.5noitcetedytilamronbaerutarepmetdaehlamrehT.21noitcetorptnerruc-revorotoM
.6noitcetedesuftuo-wolB.31remiterawdraH
.7noitcetedytilamronbaegatlovdaeH
Platen unit
Thermal head
Motor
Sensor (Photo-
interruptor)
30,29, .....................2,1
Connector No
(FPC pin numbers)
FPC
Connect terminal:
surface side
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
/