Fujitsu FTP-627MCL353 User manual

Fujitsu
Brand
Fujitsu
Model
FTP-627MCL353
Category
POS/mobile printers
Type
User manual

This manual is also suitable for

Fujitsu FTP-627MCL353 is a 24V driven, high-speed thermal printer with a 2-inch paper width equivalent. It is ultra-compact, measuring only 26.4 mm in height, 83.5 mm in width, and 43.0 mm in depth, making it ideal for portable and space-constrained applications. Despite its compact size, it offers high-speed printing at up to 100 mm/s (800 dotlines/s) using Fujitsu's unique head drive control. The printer is available with either a full cut or partial cut auto cutter, providing flexibility for different applications.

Fujitsu FTP-627MCL353 is a 24V driven, high-speed thermal printer with a 2-inch paper width equivalent. It is ultra-compact, measuring only 26.4 mm in height, 83.5 mm in width, and 43.0 mm in depth, making it ideal for portable and space-constrained applications. Despite its compact size, it offers high-speed printing at up to 100 mm/s (800 dotlines/s) using Fujitsu's unique head drive control. The printer is available with either a full cut or partial cut auto cutter, providing flexibility for different applications.

1
FTP-627MCL353/354 #01 / #02
■ OVERVIEW
The FTP-627 MCL Series are 24V driven high-speed printers
with a 2-inch paper width equivalent.
The FTP-627 MCL Series can be used for a variety of
applications, such as portable terminals, POS, banking
terminals, and measurement and medical equipment.
■ HIGHLIGHTS
• Ultra compact
Height 26.4 mm, width 83.5 mm, depth 43.0 mm
• High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Auto Cutter
Full cut type (#01) and partial cut type (#02) printers are
available.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
24V DRIVEN, FTP-607 Series
2” HIGH SPEED THERMAL PRINTER
FTP-627MCL354
2
FTP-627MCL353/354
■ PART NUMBERS
■ SPECIFICATIONS
Part number FTP-627MCL353 #01/#02 / FTP-627MCL354#01/#02
Printing method Thermal-line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Number of columns ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm
Paper thickness 60 to 80 µ m (some paper in this range may not be used because of
paper characteristics)
Printing Speed Maximum 100mm/sec. (800 dot line/sec.)
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
12 × 24 dots, (1.5 × 3.0 mm), 32 columns: ANK
24 × 24 dots, (3.0 × 3.0 mm), 16 columns: ANK
8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 24 columns: ANK
SpecificationsItem
Character types
Character, dimensions (W×H), number of
columns
Note: #01 is for full cut, #02 is for partial cut
rebmuNtraP
rettuChtiwmsinahcemretnirP
)epyttuclluf,noitresnirepaptnorf(10#353LCM726-PTF
)epyttuclaitrap,noitresnirepaptnorf(20#353LCM726-PTF
)bonktuohtiwepyttuclluf,noitresnirepapmottob(10#453LCM726-PTF
)bonktuohtiwepyttuclaitrap,noitresnirepapmottob(20#453LCM726-PTF
gnivirdrofISL)ylnoKNA(102UC726-PTF
3
FTP-627MCL353/354
■ SPECIFICATIONS
*+5˚C to +40˚C printing density assurance rance.
metInoitacificepS
ecafretnI scinortneC/C232SRotsmrofnoC
rewoP
ylppus
daehtnirproF
)kaepA2.2(A5.1,tnerrucegarevaCDV42
).ces/mm001:deepstnirp,%52:oitartnirp(
rotomroFmumixamA1,%5±CDV42
rettucroFmumixamA1,%5±CDV5
cigolroFmumixamA1.0,%5±CDV5
snoisnemiDrettuchtiwmsinahceM)HxDxW(mm4.62x0.34x5.38
thgieWrettuchtiwmsinahceMg021yletamixorppA
efiL
daeH
dradnatsruorednu(tod/seslupnoillim05:ecnatsiseresluP
mk05ecnatsidgnilevartrepap:ecnatsisernoisarbA;)snoitidnoc
)sselro%52:oitartnirp(
rettuCstuc000,003
gnitarepO
tnemnorivne
*erutarepmetgnitarepOC˚05otC˚0
ytidimuhgnitarepO)noitasnednocon(HR%58ot02
erutarepmetegarotS)dedulcnitonrepap(C˚06+otC˚02-
ytidimuhegarotS)noitasnednocon(HR%59ot5
noitceteD
noitcnuf
erutarepmetdaeH
noitceted
rotsimrehtybdetceteD
noitcetedkram/tuorepaPretpurretni-otohpybdetceteD
esaelernetalPhctiwsgnidilsybdetceteD
repapevitisneslamrehtdednemmoceR
repaPevitisneShgiH)repaPnoppiN(4E-SK05FT
:repapdradnatS-PTF,)repaPnoppiN(E-SK06FT
,)repaPijO(R501DP,)mm85(100UP020
)mm85(1070P020-PTF
repaPefiLmuideM,)mm85(2010P020-PTF,1F-SK06FT
1-BBV022P,)repaPijO(R071DP
)repaPihsibustiM
repaPefiLgnoL532-BFA,)repaPijO(N-R061DP
noppiN(R-JK05PT,)repaPihsibustiM(
)repaPnoppiN(AA022AH,)repaP
4
FTP-627MCL353/354
■ DIMENSIONS
1. Printer mechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-627MCL354
FTP-627MCL353
80.5
38.6
58
+0
-1
(paper width)
26.4
1.2
(26.9)
32
29.5
11
(56.9)
at release
at close
(40.5)
(37.2)
45 degrees (cutter opening
and closing angles)
(75)
33.7
3 max.
45
˚
at close
at release
(37.2)
38.6
3
2
29.
5
(26.
9
(75)
26.4
(67)
3 MAX
83.5 1
5
FTP-627MCL353/354
1. Connector (FPC) specification (CN4)
(1)Connector
Mechanical unit side: FPC connector
Remote side (housing site): 52610-3090 (made by Molex)
(2) Pin assignment on the mechanical side
oN
langiSO/IstnetnoC
1KHP— )edohtaC(retpurretniotohP
2NESV— rosnesrepaprofylppusrewopdnuorG
3EHPO )rottimE(retpurretniotohP
4WS— hctiwsneponetalP
5WSO hctiwsneponetalP
6HV—
daehlamrehtrofylppusrewoP7HV—
8HV—
9CN— detcennoctoN
01KLCIkcolC
11TALI hctalatadtnirP
212BTSI2ebortS
311BTSI1ebortS
41DNG—
daehlamrehtrofylppusrewopdnuorG
51DNG—
61DNG—
71DNG—
81DNG—
91DNG—
02HTO rotsimrehT
12DDV— cigolrofrewoP
223BTSI3ebortS
32IDI niatadtnirP
42HV—
daehlamrehtrofylppusrewoP52HV—
62HV—
72A/TMI
langisnoitaticxerotomgnippetS
82A/TMI
92B/TMI
03B/TMI
6
FTP-627MCL353/354
Platen unit
Thermal head
Motor
Sensor (Photo-
interruptor)
30,29, .....................2,1
Connector No
(FPC pin numbers)
FPC
Connect terminal:
surface side
2. Cutter (CN5)
Connector on control circuit side: B4B-PH-K-S (J.S.T. or equivalent)
.oNlangiSO/IstnetnoC.oNlangiSO/IstnetnoC
11WS-
noitisoprettuC
hctiwstceted
22WS-
noitisopemoH
hctiwstceted
3+MO
rotomgnippetS
noitaticxelioc
4-MO/I
rotomgnippetS
noitaticxelioc
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/12/2004.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Fujitsu FTP-627MCL353 User manual

Fujitsu
Brand
Fujitsu
Model
FTP-627MCL353
Category
POS/mobile printers
Type
User manual
This manual is also suitable for

Fujitsu FTP-627MCL353 is a 24V driven, high-speed thermal printer with a 2-inch paper width equivalent. It is ultra-compact, measuring only 26.4 mm in height, 83.5 mm in width, and 43.0 mm in depth, making it ideal for portable and space-constrained applications. Despite its compact size, it offers high-speed printing at up to 100 mm/s (800 dotlines/s) using Fujitsu's unique head drive control. The printer is available with either a full cut or partial cut auto cutter, providing flexibility for different applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents