StarTech.com IDE66-36 Datasheet

Category
Flat cables
Type
Datasheet
36in Dual Drive Ultra ATA IDE Cable
StarTech ID: IDE66_36
This 36in dual drive IDE cable lets you connect two ATA 100/133 drives to a computer IDE port, as Master and
Slave drives. This high quality IDE cable is an ideal solution for connecting hard disk drives, CD-ROMs, Tape
Backup drives, Zip drives, DVD-ROM, or any ATA peripheral.
Applications
Connects up to 2 ATA33/66/100/133 IDE hard drives to host controller
Features
80-pin cable provides a ground pin between each control and data signal, thus improving signal reliability
Technical Specifications
Warranty Lifetime
Connector A 1 - IDE (40 Pin; EIDE/PATA) Female
Connector B 2 - IDE (40 Pin; EIDE/PATA) Female
Maximum Cable Length 0.9 m [3 ft]
Cable Length 914.4 mm [36 in]
Color Gray
Product Length 914.4 mm [36 in]
Note 20in(508mm) and 16in(406mm) between connectors
Shipping (Package) Weight 0.1 kg [0.2 lb]
Included in Package 1 - 36 In. Dual Drive Ultra ATA/66 Cable
Certifications, Reports and Compatibility
  • Page 1 1
  • Page 2 2

StarTech.com IDE66-36 Datasheet

Category
Flat cables
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI