Aladdin BI-FABRIC 4 User manual

Brand: Aladdin

Model: BI-FABRIC 4

Type: User manual

Aladdin BI-FABRIC 4 is a 200W Bi-Color LED panel with a high CRI and TLCI of 98, providing accurate color reproduction. It features a wide color temperature range of 2900K to 6000K, allowing for versatile lighting options. With its 140° beam angle, it offers a broad and even light distribution. The panel has a dimming range of 1% to 100%, enabling precise light control. It includes a dimmer unit with DMX512 support for advanced lighting setups.

Aladdin BI-FABRIC 4 is a 200W Bi-Color LED panel with a high CRI and TLCI of 98, providing accurate color reproduction. It features a wide color temperature range of 2900K to 6000K, allowing for versatile lighting options. With its 140° beam angle, it offers a broad and even light distribution. The panel has a dimming range of 1% to 100%, enabling precise light control. It includes a dimmer unit with DMX512 support for advanced lighting setups.

Aladdin BI-FABRIC 4

Bi-Color

USER MANUAL

THANK YOU FOR YOUR PURCHASE

Aladdin Lights

[email protected]

User Manual

Version: 1.0

Unpack your panel and accessories from the kit. Plug in the panel connetor

to your dimmer-unit. Use the extansion in between if needed. IPlug in your

dimmer-unit to a power outlet. Instead of using the power outlet, there’s

an integrated V-Mount or Gold-Mount plate on top of the dimmer. You can

use batteries from 12-30V DC.

Just note that you need batteries which can handle the power draw of 200

watts from the panel. There’s a simple calculation for that:

If you are using 14.8V batteries you need at least a working current of

13.5A. If your battery is rated at 14.8V and 200Wh/13.5Ah with a working

current of 13.5A you can run your BI-FABRIC 4 for one hour.

For any further questions about using our products please refer to our cus-

tomer service or watch the instructional videos on www.aladdin-lights.com

or YouTube.

START-UP GUIDE

1

1 Metal corner (can be attached to magnets)

2 Metal ring for mounting (can be attached to magnets)

3 Velcro

4 Connector

POWER DRAW (W)

= MIN. WORKING CURRENT (A) =

BATTERY VOLTAGE (V)

200 (W)

= 13.5 (A)

14.8 (V)

1

3

2

4

2

IMPORTANT CAUTIONS AND WARNINGS

• Do not use near ﬂammables and heaters.

• Do not expose the unit to direct sunlight for a long period (applies also for

storing in a car).

• Do not use the dimmer wire or extension wire to hang or mount the panel.

• Do not bend or fold the panel more than 90 degrees.

• Do not tape directly on the LEDs of the panel - they can burn out.

• Do not damage the product with improper force or cause any impact with

heavy objects.

• Do not cut the panel with sharp objects.

• Keep out of reach of children.

• The panel will heat up when running a long period of time on 100% pow-

er, make sure to have it in your eyesight at all times. Use the frame to assure

enough air ﬂow for heat reduction.

• Use the product only within the temperature range of -10°C – +40°C.

• Make sure the panel has cooled down before storing it in the pouch or

any other case.

• When you have technical problems while using the product, stop using it

immediately and contact your dealer / reseller.

3

SELECTED OPTIONAL ACCESSORIES

WARRANTY

We provide a one year warranty period after the purchase. This warranty

covers repairs or a replacement for faulty products within this period. After

this warranty has been expired, you can still get repairs for your product

which will be charged extra.

Aladdin Lights reserves the right to refuse warranty service on products un-

der disputable conditions.

WARRANTY EXCLUSIONS

In case of any of the below listed causes, the warranty does not apply, even

if it is within the free warranty period.

- Product failure due to consumer negligence.

- Product failure due to usage of not compatible power sources.

- Product failure due to disassembly by not ofﬁcial resellers/distributors.

4

FL200BISBXR

Round sobox for

smooth light transitions.

AMS-FL200BIFR

Compact frame with

ballhead and Velcro.

FL200BISBXW

Wide sobox for a soer

light source.

Light source 200W Bi-Color LEDs

CRI Ra 98

TLCI 98

Color temperature 2900K - 6000K

Beam angle 140°

Dimmer Dimming: (1%–100%)

Cooling Passive cooling

Dimmer input 12V to 30VDC

Power unit input Automatic voltage 100V to 240VAC

Power consumption 200W

Dimensions 1080mm (W) x 300mm (H) x 5mm

Weight 516g

Connection Connector plug

Temperature range -10°C – +40°C

DMX512 support With dimmer unit

DMX512 2 Channels - White Bi-Color

Material Fabric

TECHNICAL SPECIFICATIONS

THANK YOU FOR YOUR PURCHASE

5

www.aladdin-lights.com

PICTURE BY FAUZEE NASIR

1
2
3
4
5
6
7
8

Aladdin BI-FABRIC 4 User manual

Brand: Aladdin

Model: BI-FABRIC 4

Type: User manual

Aladdin BI-FABRIC 4 is a 200W Bi-Color LED panel with a high CRI and TLCI of 98, providing accurate color reproduction. It features a wide color temperature range of 2900K to 6000K, allowing for versatile lighting options. With its 140° beam angle, it offers a broad and even light distribution. The panel has a dimming range of 1% to 100%, enabling precise light control. It includes a dimmer unit with DMX512 support for advanced lighting setups.

Download PDF

Related papers

Other documents