Silvercrest SKMC 1200 C3 Operating Instructions Manual

Brand: Silvercrest

Model: SKMC 1200 C3

Category: Blenders

Type: Operating Instructions Manual

This manual is also suitable for

HOYER Handel GmbH

Tasköprüstraße 3

DE-22761 Hamburg

DEUTSCHLAND

Status of information:

IAN 317552 IAN 317552

03/2019 ID: SKMC 1200 B2_19_V1.1

MONSIEUR CUISINE CONNECT

Operating instructions

MONSIEUR CUISINE CONNECT SKMC 1200 B2

GB_MC Connect_Kuechenmaschine_U1U4.fm Seite 1 Donnerstag, 21. März 2019 3:16 15

English .................................................................... 2

__317552_MC-Connect_GB.book Seite 2 Donnerstag, 21. März 2019 10:53 10

Overview

1213

__317552_MC-Connect_GB.book Seite 3 Donnerstag, 21. März 2019 10:53 10

Contents

1. Overview ................................................................................ 4

2. Intended purpose .................................................................... 4

3. Safety information .................................................................. 5

4. Items supplied ......................................................................... 7

5. Switching on for the first time and connecting to the Internet ... 7

6. Overview of functions ............................................................. 9

7. Light, sound and image signals ............................................. 10

7.1 Adjust the volume of the audio signals ........................................................... 10

7.2 Overview of the signals................................................................................ 10

8. Unpacking and setting up ..................................................... 11

9. Using the blender jug ............................................................ 11

9.1 Markings inside the blender jug .................................................................... 11

9.2 Using and removing the blade assembly ........................................................ 12

9.3 Insert blender jug ........................................................................................ 12

9.4 Insert and remove the mixer attachment ......................................................... 12

9.5 Put on the lid of the blender jug .................................................................... 13

9.6 Measuring beaker as lid for the filling opening ............................................... 13

9.7 Cooking and steaming with the cooking pot ................................................... 13

9.8 Using the spatula ........................................................................................ 14

9.9 Removing the blender jug............................................................................. 14

10. Operating the device ............................................................. 14

10.1 Power supply.............................................................................................. 14

10.2 Switching the device on and off .................................................................... 14

10.3 Screen ....................................................................................................... 15

10.4 Basic operation........................................................................................... 15

10.5 Setting the time ........................................................................................... 16

10.6 Setting the temperature ................................................................................ 16

10.7 Setting the speed......................................................................................... 17

10.8 Anti-clockwise rotation ................................................................................. 17

10.9 Turbo function............................................................................................. 17

10.10 Scale ......................................................................................................... 18

10.11 Overflow hole............................................................................................. 18

11. The most important menus .................................................... 19

11.1 Overview of the menus ................................................................................ 19

11.2 The start menu ............................................................................................ 20

11.3 Automatic programs .................................................................................... 21

11.4 Recipes ...................................................................................................... 22

12. Steaming .............................................................................. 23

12.1 General program information ....................................................................... 23

12.2 Preparation of the steamer attachments .......................................................... 23

12.3 Starting the steaming process........................................................................ 23

12.4 Pause and end............................................................................................ 24

__317552_MC-Connect_GB.book Seite 2 Donnerstag, 21. März 2019 10:53 10

12.5 Checking the cooking temperature ................................................................ 24

12.6 Steaming with the cooking pot ...................................................................... 24

12.7 Overheating protection ................................................................................ 24

12.8 Tips on steaming ......................................................................................... 24

12.9 Using the steamer attachments ...................................................................... 24

12.10 Preparing menus ......................................................................................... 24

13. Dough kneading ................................................................... 25

13.1 General program information ....................................................................... 25

13.2 Starting the program.................................................................................... 25

13.3 Pause and end............................................................................................ 25

14. Browning .............................................................................. 25

14.1 General program information ....................................................................... 25

14.2 Starting the program.................................................................................... 25

14.3 Pause and end............................................................................................ 26

15. CookingPilot ......................................................................... 26

15.1 General information about CookingPilot......................................................... 26

15.2 Functions of the buttons in the CookingPilot menu............................................ 27

15.3 Search for recipes ....................................................................................... 27

15.4 Choose a recipe and cook ........................................................................... 28

15.5 Save favourite recipe ................................................................................... 28

16. Other functions ..................................................................... 28

16.1 Information................................................................................................. 28

16.2 Factory settings ........................................................................................... 29

16.3 Updates ..................................................................................................... 29

16.4 Help centre................................................................................................. 29

16.5 Connect to the Internet ................................................................................. 29

16.6 Switching off the WLAN connection .............................................................. 30

16.7 Member account ......................................................................................... 30

16.8 New recipes: how, when, where? ................................................................. 30

16.9 Change menu language............................................................................... 31

17. Cleaning and servicing the device .......................................... 31

17.1 Cleaning the base unit ................................................................................. 31

17.2 Cleaning in the dishwasher .......................................................................... 31

17.3 Cleaning the accessories.............................................................................. 31

17.4 Cleaning, checking and replacing seals......................................................... 31

17.5 Cleaning, checking and replacing the spatula ................................................ 32

17.6 Descaling................................................................................................... 32

17.7 Storage...................................................................................................... 32

18. Malfunctions, Cause, Remedy ................................................ 33

19. Disposal ................................................................................ 34

20. Technical specifications .......................................................... 34

21. How to order accessories ...................................................... 34

22. Website ................................................................................ 34

23. Warranty of the HOYER HandelGmbH .................................. 35

__317552_MC-Connect_GB.book Seite 3 Donnerstag, 21. März 2019 10:53 10

1. Overview

1 Lid for the steamer attachments

2 Steamer attachment, shallow

3 Steamer attachment, deep

4 Seal for the deep steamer attachment

(ensure the correct position)

5 Blender jug

6 Direction icon

70/I On/off switch

8 Touchscreen

9 Control dial

10 LED ring

11 Holder for the blender jug (with gear ring and

weighing function)

12 Overflow hole

13 Base unit

14 Suction feet

15 Power cable with mains plug

16 Cable compartment

17 Seal for blade assembly (ensure the correct posi-

tion)

18 Blade assembly (with cog wheel)

19 Cooking pot

20 Mixer attachment

21 Spatula

22 Seal for the lid of the blender jug

(ensure correct position)

23 Lid for the blender jug

24 Measuring beaker

not shown:

25 Unlocking lever

Thank you for your trust!

Congratulations on the purchase of your new food proces-

sor with cooking function “Monsieur Cuisine connect”.

For safe handling of the product and in order to get to

know the entire range of features:

• Read these user instructions through thor-

oughly prior to initial use.

• Above all, observe the safety information!

• The device should only be used as described

in these user instructions.

• Keep this copy of the user instructions for

reference.

• If you pass the device on to someone else,

please include this copy of the user instruc-

tions. The user instructions are a part of the

product.

We wish you a lot of joy with your new food processor

with cooking function “Monsieur Cuisine connect”!

Symbols on your device

The symbol indicates that materials labelled in this

way do not change either the taste or the smell of

food.

This symbol warns you against touching the hot sur-

face.

This symbol warns you against touching hot steam.

2. Intended purpose

The “Monsieur Cuisine connect” is used to mix, whisk, beat,

stir, chop, purée, emulsify, steam, stew, knead, brown, cook,

perform guided cooking via stored recipes, and weigh food.

These user instructions describe the basic functions such as

mixing, chopping and steaming. For information on the

preparation of special dishes, refer to the recipe book in-

cluded in the delivery.

The device is designed for private, domestic use. The de-

vice must only be used indoors.

This device must not be used for commercial purposes.

Foreseeable misuse

WARNING! Risk of material damage!

~ Do not use the device to chop particularly hard food

such as bones or nutmegs.

__317552_MC-Connect_GB.book Seite 4 Donnerstag, 21. März 2019 10:53 10

3. Safety information

Warnings

If necessary, the following warnings are used in this copy of the user instructions:

DANGER! High risk: failure to observe this warning may result in injury to life and limb.

WARNING! Moderate risk: failure to observe this warning may result in injury or serious material damage.

CAUTION: low risk: failure to observe this warning may result in minor injury or material damage.

NOTE: circumstances and special aspects that must be borne in mind when handling the device.

Instructions for safe operation

Children must not use this device.

This device with its power cable must be stored out of the reach of children.

Cleaning and user maintenance must not be performed by children.

Children must not play with the device.

This device can be used by people with restricted physical, sensory or intellectual abilities or people

without adequate experience and/or understanding if they are supervised or instructed on how to

use this device safely and if they are aware of the resulting dangers.

The surfaces of the device become very hot during operation. During operation, always use

potholders or oven gloves when touching the steamer attachment or the lid for the steamer

attachments.

The device must be disconnected from the mains if left unattended and prior to assembly, disassem-

bly or cleaning.

Please remember that the blades of the blade assembly

are very sharp:

- Never touch the blades with your bare hands in order to avoid cuts.

- When washing manually, the water should be sufficiently clear so that you can see the blade

assembly easily to avoid injuries caused by the very sharp blades.

- When emptying the blender jug, ensure not to touch the blades of the blade assembly.

- When removing and inserting the blade assembly ensure not to touch the blades.

During the turbo function, ensure that no hot ingredients are in the blender jug. These could be

ejected and may cause scalding.

After being switched off, the blade assembly and the mixer attachment will continue to rotate for a

while. Please wait until all parts have come to a standstill before unlocking the blender jug and

opening the lid.

This device is not intended to be operated using an external timer or a separate remote control sys-

tem.

If the power cable of this device should become damaged, it must be replaced by the manufacturer,

the manufacturer's customer service department or a similarly qualified specialist in order to avoid

any hazards.

Prior to the replacement of parts or attachments which move when in operation, the device must be

switched off and disconnected from the mains.

Make sure that no liquid overflows onto the device plug connection.

Remember that the surface of the heating element remains hot after use.

This device is equally intended for use in the home and in applications similar to the home, such as

for example...

… in kitchens for staff in shops, offices and other commercial settings;

… on agricultural properties;

… by customers in hotels, motels and other residential facilities;

… in bed-and-breakfast establishments.

Please take note of the chapter on cleaning (see “Cleaning and servicing the device” on page 31).

__317552_MC-Connect_GB.book Seite 5 Donnerstag, 21. März 2019 10:53 10

DANGER for children

~ Packing materials are not children's toys. Children

should not be allowed to play with the plastic bags.

There is a risk of suffocation.

DANGER to and from pets and livestock

~ Electrical devices can represent a danger to pets and

livestock. In addition, animals can also cause damage

to the device. For this reason you should keep animals

away from electrical devices at all times.

DANGER! Risk of electric shock due to

moisture

~ The device must never be operated in the vicinity of a

bathtub, a shower, a filled washbasin or similar items.

~ The base unit, the power cable and the mains plug

must not be immersed in water or other liquids.

~ Protect the base unit against moisture, water drips and

splashes.

~ If liquid should enter the base unit, pull out the mains

plug immediately. Have the device checked before re-

using.

~ Never touch the device with wet hands.

~ If the device falls into water, disconnect the mains plug

immediately. Only then is it safe to retrieve the device.

DANGER! Risk of electric shock

~ Only plug the mains plug into the wall socket after the

device has been completely assembled.

~ Only connect the mains plug to a properly installed

and easily accessible grounded wall socket whose

voltage corresponds to the specifications on the rating

plate. The wall socket must still be easily accessible af-

ter the device is plugged in.

~ Ensure that the power cable cannot be damaged by

sharp edges or hot spots. Do not wrap the power ca-

ble around the device.

~ Even after it has been switched off, the device is not

completely disconnected from the mains. In order to

fully disconnect it, pull out the mains plug.

~ Ensure that the power cable never becomes a trip haz-

ard, and that nobody can get caught up in or step on

it.

~ Keep the power cable away from hot surfaces (e.g. a

hot plate).

~ When using the device, ensure that the power cable

cannot be trapped or crushed.

~ When removing the mains plug from the wall socket,

always pull on the plug and never the cable.

~ Disconnect the mains plug from the wall socket …

…if there is a fault,

…when you are not using the “Monsieur Cuisine con-

nect”,

… before you assemble or disassemble the “Monsieur

Cuisine connect”,

…before cleaning the “Monsieur Cuisine connect”

and

…during thunderstorms.

~ Do not use the device if there is visible damage to the

device or the power cable.

~ In order to avoid any hazards, do not make modifica-

tions to the device.

DANGER! Risk of injury from cutting

~ The device must never be operated without the jug.

~ Never reach into the rotating blades. Do not touch rotat-

ing parts with spoons or similar utensils. Keep long hair

and loose clothing away from the rotating parts.

The only exception: the spatula included in the delivery

is designed so that when stirring clockwise it does not

come into contact with the blade assembly. The spatula

must not be used with the mixer attachment.

~ Please remember that the blades continue to turn for a

short time after switching off the device. This is espe-

cially true at high rotational speeds. Only reach into

the pot when the blade is stationary.

FIRE HAZARD

~ Before turning the device on, place it on a level, sta-

ble, dry, heat-resistant surface.

~ It is not necessary to constantly supervise during oper-

ation, but just to check regularly. This applies in par-

ticular when very long cooking times are set.

DANGER! Risk of injury through burning

~ If the contents of the blender jug are hot, the lid must

be opened slowly and carefully.

The mass in the blender jug is still in motion immediate-

ly after puréeing and could spill out if the lid is opened

too quickly. Therefore, wait approx. 10 seconds after

puréeing before opening the lid.

~ Only transport the device when it has cooled down.

~ Wait for the device to cool down before cleaning.

DANGER! Risk of injury through scalding

~ Avoid opening the lids for the steamer attachments

during the cooking process, since hot steam will es-

cape.

~ Ensure that hot steam escapes through the steam vents

of the lid for the steamer attachments. Never cover

these openings, since otherwise steam might have

backed up in the device escaping abruptly when the

lid is opened.

~ If you want to open the lid for the steamer attachments,

carefully lift the lid first on the back rear so that the es-

caping surge of steam is guided away from you.

WARNING! Risk of material damage

~ Place the device exclusively on a level, dry, non-slip

and waterproof surface, so that it can neither fall nor

slip off.

~ Never place the device on a hot surface, e.g. a hot

plate.

~ The mixer attachment must only be used with speed

settings 1 to 4.

__317552_MC-Connect_GB.book Seite 6 Donnerstag, 21. März 2019 10:53 10

~ The turbo function must not be used when using the

mixer attachment.

~ Use the blender jug exclusive

ly with the lid in place,

otherwise liquid might be ejected.

~ Do not change the position of the device, as long as

there is still food or dough in the device.

~ Never overfill the blender jug, since otherwise the con-

tents might be ejected. Overflowing liquid would flow

onto the surface. You should therefore place the device

on a waterproof surface.

~ Ensure that during steaming, there is never too much or

too little water in the device.

~ Never place the device directly under a wall-mounted

cupboard, as steam comes out from the top and could

damage the furniture.

~ Only ever use clean drinking water for producing

steam.

~ Do not operate the device when it is empty, as this

causes the motor to overheat and may result in it be-

coming damaged.

Only use the original accessories.

~ Do not use any astringent or abrasive cleaning agents.

~ The device is equipped with non-slip plastic suction

feet. As furniture is coated with a wide array of var-

nishes and plastics and is also treated with different

care products, it cannot be fully ruled out that some of

these materials contain ingredients that could attack

and soften the non-slip plastic suction feet. If neces-

sary, place a non-slip mat under the device.

4. Items supplied

1 food processor with cooking function

“Monsieur Cuisine connect”, base unit13

1blender jug5 with:

- Blade assembly18

-Lid23 for the blender jug

- Measuring beaker24

1 cooking pot19

1 mixer attachment20

1 spatula21

1 steamer attachment, comprising:

- Steamer attachment, deep3

- Steamer attachment, shallow2

- Lid for the steamer attachments1

1 copy of the user instructions

1 recipe book

5. Switching on for the first

time and connecting to the

Internet

You can use your “Monsieur Cuisine connect” at any time

and without restrictions even without an Internet connec-

tion. The connection to the Internet only serves to expand

the number of recipes on your device and to log in to your

customer account.

How to find information about your

WLAN network!

If you are not sure what your WLAN network or password

is, here are some tips on where to find the information.

• Look at the back or underside of your router. There you

will usually find all the information you need.

• Look through the documentation provided by your net-

work provider.

• Name of the WLAN network:

This is usually mentioned under "WLAN Name" or

"SSID Name" or a combination of both "WLAN Name

(SSID)". After this comes the name. If you see that

name in the list of the “Monsieur Cuisine connect”, tap

on it.

• Name of the password:

This is usually to be found under "Name WLAN pass-

word" or "WLAN key". It is mostly followed by WPA,

WPA2 or similar in brackets, which is the encryption

type. This is followed by the password, usually as a

combination of numbers and letters or just numbers.

General information about the WLAN

connection

- Signing in to your WLAN network is only necessary

when connecting for the first time or after you have

made changes to your WLAN network.

- Your “Monsieur Cuisine connect” will remember a net-

work to which it was connected once and will automat-

ically reconnect.

- As a rule, a password must be entered when first con-

necting. In the unusual case that your network is unse-

cured, no password needs to be entered.

__317552_MC-Connect_GB.book Seite 7 Donnerstag, 21. März 2019 10:53 10

Switching on for the first time

1. Connect the mains plug15 to a suitable wall socket.

The wall socket must still be easily accessible after

connection.

2. Pull only as much cable as necessary out of the cable

compartment16.

3. Set the on/off switch7 at the rear on the right to I:

- The touchscreen8 lights up.

4. The screen that allows you to select the language ap-

pears. Press the field with the desired language.

5. Our privacy statement will appear in the next win-

dow. Slide it up with your finger to read the rest of

the text. After reading, press the button Take note of.

6. After a few seconds, a window will appear prompt-

ing you to connect to the Internet.

-Tap Cancel on the screen if you do not want to con-

nect to the Internet. A tutorial will appear explaining

the basic functions. You can start or cancel this.

-Press Continue to connect to the Internet.

7. A list with all visible WLAN networks appears.

- When first selected, WLAN networks will be

searched for automatically.

- Detected WLAN networks are displayed in a list.

- All visible WLAN networks are displayed.

8. Swipe your finger on the screen to scroll up and

down the list.

9. Tap on your WLAN network with one finger.

10. If the network is unprotected, the connection will now

be established. However, a small window will proba-

bly pop up, in which you will need to enter the

WLAN password (WLAN key).

There will also be a keyboard on which you can en-

ter the password.

11. After entering, press CONNECT in the upper win-

dow. The connection will be established.

12. After connecting, the active WLAN network is dis-

played in colour. Connected appears under the name

of the network in small writing.

Tap on Continue.

13. Now follow two windows in which we ask for your

permission to receive, evaluate and forward the user

data of the MCC to a partner. More detailed informa-

tion can be found under the link Data protection.

In each window press:

- Refuse: the data is not read out

- Permit: the consent to the data collection to the ex-

tent described is granted.

14. The following window is about your member ac-

count. You can choose between:

- Use existing account: when you press the button

with the check mark, you can log in to your existing

account. Enter your email address and password.

- Register, new account: when you enable this op-

tion, you can set up a new account. The program

will guide you through the registration process. At

the end of the process you will receive an email.

- Skip: atutorial will appear, introducing you to the

basic functions.

15. Click on the link in the email to activate your new ac-

count.

16. Enter the email address and the password in the de-

vice and press Login. You will receive a confirmation

of registration.

- Once the connection is established and you are

logged into the member account, new recipes from

our website will automatically be loaded and saved

in the “Monsieur Cuisine connect”.

17. Press Continue. In the next window you can subscribe

to the newsletter. To do this, slide one or both slide

switches to the right.

NOTE: if you do not want to subscribe to a newsletter,

leave the menu without changing anything.

18. Press Continue. A tutorial will appear, introducing

you to the basic functions. Start it by pressing Start or

tap X to cancel it.

19. The start menu shown below will appear.

Deutsch

Español

Français

Italiano

Polski

WLAN

LarsH

WLAN-45692

ZwickeWlanNetz

WLAN-LZB7UB

WLAN-370155

FRITZIBox 7312

Select a network...

[WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP-preouth][ESS]

[WPA2-PSK-CCMP][WPS][ESS]

[WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]

[WPA2-PSK-CCMP][WPS][ESS]

[WPA-PSK-TKIP][WPA2-PSK-CCMP][WPS][ESS]

Back Continue

Auto Recipes Settings

00:00 0

°C

Turbo Anti-clockwise Weighing

__317552_MC-Connect_GB.book Seite 8 Donnerstag, 21. März 2019 10:53 10

6. Overview of functions

Button/

Working tool

Function Notes

TARE / Weighing32

Weighing accurately to the gram with

Tara function (set to 0 to weigh additional

ingredients)

- Up to 5,000 g

- Works only in idle state, not during

operation

Anti-clockwise rota-

tion34

Gentle mixing of food not to be chopped - Speed 1 - 3

Turbo36

- Press the button to switch to the highest

speed, e.g. to chop nuts and small

amounts of herbs or onions

- Keep the button pressed for as long as

you want the function to be active

- Function is blocked if the food temper-

ature in the blender jug exceeds

60 °C.

- For liquids: up to max. 2.5 litres

- Do not use with a mixer attach-

ment20

Blade assembly18

- For mincing, chopping, puréeing

- For the program KNEADING

- With the function

ANT-CLOCKWISE

for gentle mixing

- Must always be used to seal the

blender jug5

- If necessary, cut food first in pieces

with an edge length of approx.

3-4cm

Mixer attachment20

For fluid food

- To whip cream (at least 200 g)

- To whip egg white (at least 4 eggs)

- To emulsify (e.g. mayonnaise)

- Must only be used with speed settings

1 to 4

- Must not be used with function Turbo

Cooking pot19

To cook and stew Fill the blender jug5 with at least 500 ml

of water

KNEADING42

To knead doughs with the blade assem-

bly18

- A maximum of 500 g flour can be

used for heavy doughs

- A maximum of 600 g of flour can be

used for light doughs (e.g. sponge

mixture)

STEAMING41

Program for the gentle steaming with

steamer attachments2 and3, especially

for vegetables, fish and meat

Also possible with the cooking pot19

ROASTING40

For lightly browning food, e.g. meat or

onions

- Small quantities, cut in pieces

- Minced meat up to 1,000 g (500 g

for browning - up to 1,000 g for mix-

ing)

CookingPilot29

(Recipes for guided cook-

ing)

The individual steps of a recipe are dis-

played on the screen step by step.

The function is possible for the recipes in

the device as well as for the recipes you

have downloaded to the device.

__317552_MC-Connect_GB.book Seite 9 Donnerstag, 21. März 2019 10:53 10

7. Light, sound and image

signals

The “Monsieur Cuisine connect” gives you information

about the status of the device, about the completion of a

function as well as warnings about possible improper

handing.

7.1 Adjust the volume of the audio

signals

To adjust the volume or turn off the sound:

1. Tap the button on the screen.

2. If the menu shown below in the figure does not ap-

pear immediately, tap .

3. In the next window you will see the item Volume.

Right next to it is a slide switch. Tap the item and

move it to the left or right.

- fully to the right: maximum volume

- to the left: reduce volume

- fully to the left: volume off

7.2 Overview of the signals

Auto Recipes Start menu

WLAN

Volume

About...

FAQ

Data protection

Agreements

Click here to select a network

your Monsieur Cuisine connect

Frequently asked questions

Privacy statement

Transfer user data to www.monsieur-cuisine.com

CHANGE

OPEN

Signal

appears

Meaning

Audio signal

When switching

When the main menu appears, a sig-

nal will sound indicating the readi-

ness for operation.

When turning the

lid or steamer at-

tachment

The sound indicates that the safety

switch has been activated or deacti-

vated.

On-screen

prompts

Automatically displayed on-screen

prompts are accompanied by an au-

dio signal.

LED ring

Off Device is switched off or in standby

Is permanently lit

white

Device is switched on or

operation paused

White, pulsating

Cooking process active, heating up

active

Flashes 3x green Process finished

Flashes 3x red Screen dialogue appears

On-screen prompts

Before switching

to standby

Press the button on the screen to keep

the device active.

When cancelling

a process

Use the screen buttons to confirm or

reject your previous command.

__317552_MC-Connect_GB.book Seite 10 Donnerstag, 21. März 2019 10:53 10

8. Unpacking and setting up

During production, a thin film of oil is applied to protect

many components. Prior to the first use, operate the device

only with water so that any residues can evaporate.

NOTE: when the device is used the first few times, some

odour may be generated by the device due to the heating

of the motor. This is harmless. Please ensure adequate ven-

tilation.

1. Remove all packing materials.

2. Check to ensure that all parts are present and undam-

aged.

3. Clean the device prior to first use! (see

“Cleaning and servicing the device” on

page 31).

4. Use the blender jug5 to bring 3 litres of water to a

boil once, pouring it away afterwards (see “Setting

the temperature” on page 16).

5. Place the base unit13 on a level, dry, non-slip and

waterproof surface, so that it can neither fall nor slip

off.

CAUTION:

~ Overflowing liquid would flow onto the work surface.

You should therefore place the device on a waterproof

surface.

9. Using the blender jug

NOTE: these user instructions describe the basic functions

such as mixing, chopping and steaming. For information

on the preparation of special dishes, refer to the recipe

book included in the delivery and search in the device’s

software.

9.1 Markings inside the blender jug

On the inside, the blender jug5 is provided with markings

regarding the filling volume:

- Bottom marking: approx. 0.5 litres

- Marking I: approx. 1 litre

- Centre marking: approx. 1.5 litres

- Marking II: approx. 2 litres

- Top marking: approx. 2.5 litres

- Marking III: approx. 3 litres corresponding to the max-

imum admissible filling volume

CAUTION:

~ When mixing liquids at speed 10 or with button

Turbo36, the blender jug5 must not contain more

than 2.5 litre, since otherwise liquid might be ejected.

For speed settings of less than 10, the blender jug5

may only be filled up to a maximum of 3 litres.

NOTE: for some applications, the blender jug5 should

not contain an insufficient amount of liquid, so that the de-

vice can function properly. Thus, for whipping cream, for

instance, you should use at least 200 ml and when beating

egg white use at least 4 eggs.

The symbol marks the

front of the blender jug.

__317552_MC-Connect_GB.book Seite 11 Donnerstag, 21. März 2019 10:53 10

9.2 Using and removing the blade

assembly

The blade assembly18 is used to chop food.

The blender jug5 must never be used without the blade as-

sembly18, since the blade assembly18 seals the blender

jug5 on the bottom.

DANGER! Risk of injury from cutting!

~ Please remember that the blades of the blade assem-

bly18 are very sharp. Never touch the blades with

your bare hands in order to avoid cuts.

In order to remove the blade assembly18, proceed as fol-

lows:

1. Position the blender jug5 horizontally.

2. Press the unlocking lever25 on the under-

side of the blender jug5 so that it points to

the open lock symbol.

3. Pull out the blade assembly18 carefully to-

wards the top.

In order to insert the blade assembly18, proceed as fol-

lows:

4. Position the blender jug5 horizontally.

5. Insert the blade assembly18 from the top.

Please take note that the two cams at the base of the

blade assembly18 must be pushed through the two

recesses in the underside of the blender jug5.

CAUTION:

~ Ensure that the seal17 is properly positioned on the

blade assembly18, since otherwise the contents

might escape.

6. In order to lock the blade assembly18,

move the unlocking lever25 on the under-

side of the blender jug5 so that it points to

the closed lock symbol.

NOTE: chop large pieces into smaller ones with an edge

length of approx. 3 - 4 cm before putting them into the

blender jug. Otherwise larger pieces might get stuck in the

blades.

9.3 Insert blender jug

1. Place the blender jug5 into the holder11. The front

side with the pot mark points towards you.

2. Press the blender jug5 slightly downward until the

cog wheel of the blade assembly18 locks in place in

the gear ring of the holder11.

NOTES:

• If the blender jug5 cannot be pressed downward,

“wobble” slightly so that the cog wheel of the blade

assembly18 in the blender jug5 will slide into the

gear ring of the holder11.

• Should the blender jug5 not be positioned correctly, a

safety mechanism prevents the functioning of the de-

vice.

9.4 Insert and remove the mixer

attachment

The mixer attachment20 serves to mix liquid foods, e.g.

to whip cream, beat egg whites, emulsify (e.g. mayon-

naise).

The mixer attachment20 is put onto the blade assem-

bly18:

- The wings of the mixer attachment20 are located in

the spaces between the blades.

- For further notes: see “Overview of functions” on

page 9.

__317552_MC-Connect_GB.book Seite 12 Donnerstag, 21. März 2019 10:53 10

CAUTION:

~ The mixer attachment20 must only be used with

speed settings 1 to 4.

~ The turbo button36 must not be pressed if the mixer

attachment20 is used.

~ When using the mixer attachment20, the spatula21

must not be used, since it might get into the mixer at-

tachment20.

~ When adding food, ensure that it will not block the

mixer attachment20.

In order to remove the mixer attachment20, pull it out up-

ward. If you feel resistance, turn it slightly.

9.5 Put on the lid of the blender jug

NOTE: the lid23 for the blender jug may only be put on

when the blender jug5 has been correctly inserted into the

base unit13. If you attach the lid first, the blender jug can

no longer be inserted into the base unit.

1. Place the lid23 for the blender jug so that the lock

symbols are opposite the arrows on the blender

jug5.

2. Press and turn the lid23 clockwise with both hands.

Only when the lid23 is correctly closed, can the de-

vice start. An audio signal indicates that the device is

ready for use.

NOTES:

• In order to facilitate the closing of the lid somewhat,

put a few drops of oil on a cloth and rub it on the

seal22.

• The device can only be started when the lid23 is put

on correctly.

9.6 Measuring beaker as lid for the

filling opening

Simultaneously, the measuring beaker24 is used to close

the lid of the blender jug5 and to measure ingredients

(20 ml to 100 ml).

• In order to close the blender jug5, place the measur-

ing beaker24 with the opening at the bottom into the

lid23 and lock it in place by turning it clockwise. It

clicks audibly.

CAUTION:

~ Prior to removing the measuring beaker24, you must

reduce the speed to setting 1, 2 or 3, so that no food

can be ejected.

• In order to fill in ingredients, the measuring beaker24

can be removed briefly.

• To measure ingredients, turn the measuring beaker24

upside down and fill in the food. The values can be

read in ml.

9.7 Cooking and steaming with the

cooking pot

1. Fill at least 500 ml

of water into the blender jug

Only fill so much water into the blender jug

that the

maximum filling volume of 3 litres will not be exceeded

when the food is added.

- If the entire food is covered by water, it will be

cooked.

- If the food is not completely covered by water, it will

be steamed.

2. Fill food into the cooking pot19.

NOTE: always make sure that the filling level does not ex-

ceed the marking MAX.

3. Place the cooking pot19 into the blender jug5.

4. Close the blender jug5 with the lid23 and the

measuring beaker24.

5. Use the on/off switch7 to switch the device on.

6. Use the display dial27 to set the desired time.

7. Set the desired temperature on the display dial30,

e.g. 100 °C for cooking.

The touchscreen8 shows the time set and the selected tem-

perature.

8. Select the speed setting 1 for an even distribution of

the heat in the water.

9. Press the

 33 button. The device starts to operate.

10. After the set time has elapsed, a signal sounds.

11. Press the on/off switch7 to switch the device off.

00:53 3 75

°C

__317552_MC-Connect_GB.book Seite 13 Donnerstag, 21. März 2019 10:53 10

9.8 Using the spatula

The spatula21 is used to stir the ingredients and to remove

the cooking pot19.

CAUTION:

~ The spatula21 must not be used with the mixer attach-

ment20 in place. Otherwise, the spatula21 might be

caught in the mixer attachment20.

~ Do not use any other kitchen utensil to stir the ingredi-

ents. The utensil might get into the blades and cause

damage.

•Always stir clockwise. The spatula21 is designed

such that when stirring clockwise it cannot come into

contact with the blade assembly18 even if that is run-

ning.

• The hook on the rear of the spatula21 can be used to

remove the hot cooking pot19 without having to

touch it directly. Simply hook on the metal bracket of

the cooking pot19 and pull it out upwards.

Tips for changing the tip and for cleaning: (see “Cleaning,

checking and replacing the spatula” on page 32).

9.9 Removing the blender jug

DANGER! Risk of injury through burning!

~ If the contents of the blender jug5 are hot, the lid23

must be opened slowly and carefully.

~ The mass in the blender jug is still in motion immediate-

ly after puréeing and could spill out if the lid is opened

too quickly. Therefore, wait approx. 10 seconds after

puréeing before opening the lid.

1. Press and turn the lid23 with both hands anticlock-

wise and then remove it.

2. Remove the blender jug5 upwards.

10. Operating the device

For safety reasons, the settings described in this chapter,

can only be selected when the device has been assembled

completely.

10.1 Power supply

• Connect the mains plug15 to a suitable wall socket.

The wall socket must still be easily accessible after con-

nection.

• Pull only as much cable as necessary out of the cable

compartment16.

10.2 Switching the device on and off

NOTE: switching on for the first time is described in chap-

ter “Switching on for the first time and connecting to the In-

ternet” on page 7.

• Set the on/off switch7 at the rear on the right to I:

- The touchscreen8 lights up.

- After some time a signal sounds and the start menu

appears on the screen.

• Set the on/off switch7 on the back to 0 to switch the

device off.

Auto Recipes Settings

00:00 0

°C

Turbo Anti-clockwise Weighing

__317552_MC-Connect_GB.book Seite 14 Donnerstag, 21. März 2019 10:53 10

10.3 Screen

The touchscreen8 shows all settings and operating values.

In sleep mode, the screen is dark and uses less energy. The

device is switched on with the on/off switch7.

If no function is active and no operation takes place for ap-

prox. 5 minutes, an acoustic signal will sound. In addition,

a dialogue box appears in the touchscreen8 in which the

time until switching to sleep mode is counted down.

• Press the button on the dialogue box to keep the de-

vice active.

• If the device is in sleep mode, simply press or turn the

control dial9 to wake up the device.

10.4 Basic operation

This section explains general operation. Exact descriptions

are given in the individual chapters, where they are rele-

vant.

The control and setting of values is carried out via the

touchscreen8 and the control dial9.

The screen

The touchscreen8 responds just like a smartphone, simply

by touching the surface. It is not possible to use the touch-

screen when wearing gloves.

In order to operate properly the screen must be kept clean.

Therefore, do not touch the screen with wet or sticky fin-

gers.

• Settings are made by touching buttons or swiping.

The control dial

•Use the control dial9 to adjust settings. The settings

are usually displayed immediately on the touch-

screen8. For example, you can scroll through lists or

select menu items by turning the control dial.

• Settings are always only made for the activated func-

tion (for example, time, temperature or speed of the

program).

• Pressing the control dial activates the marked function.

The display dial

In these instructions, the three circles shown in the above

figure are called display dials. These include buttons as

well as display surfaces and control dials - hence the name

display dial.

The display dials are speed-dependent; turning the control

dial quickly causes a faster - disproportionate - change in

the displayed values.

• The display dials each consist of three different parts:

- 00:00: these and other displays indicate the current

or the adjusted value.

- Status display: the status display around the display

dial shows the relative size of a setting.

- Symbols: the symbols (e.g. ) indicate which

basic function the display dial has.

• The display dials have different functions:

- Press and turn: with your finger, trace the outer edge

in a circle. The values are changed and displayed.

- Display of the respective values. In the figure above

the values displayed are the time, the speed and the

temperature.

• Pressing any of the three buttons switches to the func-

tion named below the button.

MINUTES

PORTIONS LIVELLO

MINUTES

PORTIONS LIVELLO

MINUTES

PORTIONS FACILE

MINUTES

PORTIONS LIVELLO

00:00

00:00 0

°C

00:00 0

°C

Turbo Anti-clockwise Weighing

__317552_MC-Connect_GB.book Seite 15 Donnerstag, 21. März 2019 10:53 10

10.5 Setting the time

Turn this display dial to set the time of the cooking process

or the processing:

• Turn the timer clockwise: increase time

• Turn the timer anticlockwise: reduce time

- The adjustable time ranges from 1 second to 99 min-

utes.

- The adjustment takes place via the following steps:

- up to 1 min. in 1-second increments,

- from 1 min. to 5 min. in 10-second increments,

- from 5 min. to 20 min. in 30-second increments,

- from 20 min. to 99 min. in 1-minute increments.

- The time set is shown on the touchscreen8.

- After the function has started, the time is counted back-

wards at the top and the set time is shown below.

- If no time is specified, the time display will show the

time from 0 seconds (00:00) up to 99 minutes

(99:00). Then, the device will be stopped automatical-

ly.

- During operation, the time can be changed.

- Once the time set has elapsed,

-the device stops,

- an acoustic signal is issued,

- the LED ring flashes green briefly and then is lit

white.

10.6 Setting the temperature

Turn this display dial to set the cooking temperature:

- The adjustable temperature ranges from 37 °C to

130 °C.

The following temperatures can be selected in °C: 37,

45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100,

105, 110, 115, 120, 125, 130.

- The set temperature is displayed in the centre of the

display dial.

- The actual temperature is displayed at the bottom of

the display dial.

- In order to start the heat-up process, a speed setting

should be selected and a time setting should be en-

tered.

- During the heating process, the display for the food

temperature may vary substantially.

- During operation, the temperature can be changed.

NOTES:

• As soon as you set a temperature, the speed may be

reset to level 3.

• If you want to purée immediately after cooking (e.g.

soup), first turn the temperature to 0 and then set the

speed.

00:00 0

°C

03:50

00:00 0

°C

Display of the set temperature

Display of the food temperature

in the pot

__317552_MC-Connect_GB.book Seite 16 Donnerstag, 21. März 2019 10:53 10

10.7 Setting the speed

Turn this display dial to set the speed:

- The speed can be adjusted in 10 increments:

- Speed 1 - 4: for the mixer attachment20;

- Speed 1 - 10: for the blade assembly18.

- There are 2 time ranges for the speed:

- Speed 1 - 6: for these speeds a time between 1 sec-

ond and 99 minutes can be chosen.

- Speed 7 - 10: for these speeds a time between

1 second and 15 minutes can be chosen.

CAUTION:

~ The mixer attachment20 must only be used with

speed settings 1 to 4. On the touchscreen8, a respec-

tive indication appears.

~ When mixing liquids at speed 10, the blender jug5

must not contain more than 2.5 litre, otherwise liquid

might be ejected (see “Steaming” on page 23). For

speed settings of less than 10, the blender jug5 may

only be filled up to a maximum of 3 litres.

- For further notes: see “Overview of functions” on

page 9.

- The speed setting is shown on the touchscreen8.

- During operation, the speed setting can be changed.

- The speed cannot be set for the steaming function.

- If during operation you change the speed to 0, the de-

vice will stop. To continue working, select a speed and

press the button

 33.

- If a temperature has been selected, only the speed set-

tings 1 - 3 are available.

Soft start

In order to avoid that during sudden acceleration of hot

food liquid is ejected from the blender jug5 or the device

starts wobbling, an automatic soft start is provided for all

settings except for the turbo function:

- Soft start activates with food temperatures exceeding

60 °C.

10.8 Anti-clockwise rotation

The anti-clockwise rotation is used for gentle stirring of

food not to be chopped.

- By pressing button 34 the direction of rotation of

the blade assembly18 can be changed in standard

operation at any time.

- The anti-clockwise rotation can only be applied at low

speed settings 1 to 3.

- For programs KNEADING and ROASTING, the anti-

clockwise rotation is controlled by the program.

• 34 Press to activate the anti-

clockwise rotation. The symbol ap-

pears at the bottom of the display

dial for as long as the function is ac-

tivated.

• 34 Press to deactivate the anti-

clockwise rotation.

10.9 Turbo function

CAUTION:

~ When mixing liquids, the blender jug5 must not con-

tain more than 2.5 litre, otherwise liquid might be

ejected.

~ Never use this function when the mixer attachment20

is used.

With the turbo function you can briefly select speed setting

10 (maximum). This, for example, is used to quickly chop

nuts, small amounts of herbs or onions.

- 36 is present: the function is possible.

- 36 is greyed out: the button is blocked, the function

is disabled (e.g. because the food temperature inside

the blender jug exceeds 60 °C).

• Press and keep button Turbo36 pressed for as long

as you need the function. To repeat, release the button

and press again.

00:00 0

°C

00:51 00

°C

Anti-clockwise

00:04

Turbo 0

°C

Turbo Anti-clockwise Weighing

__317552_MC-Connect_GB.book Seite 17 Donnerstag, 21. März 2019 10:53 10

NOTES:

• The turbo function will only work,

- if the blade assembly18 is not turning.

- if the food temperature in the blender jug5 is less

than 60 °C.

• The speed is promptly increased to setting 10 (maxi-

mum).

10.10 Scale

The integrated kitchen scales weighs in increments of

5 grams up to 5 kg.

The scales is easy to operate and ready for use unless an-

other cycle is in operation.

Easy weighing

1. The device is switched on but no other cycle is in op-

eration.

2. Press the button 32. The touchscreen8 shows the

scales’ function and 0 g .

3. Place the item to be weighed into the blender jug5.

On the touchscreen8, the weight will be shown in

grams up to 5 kilograms.

4. If you add another ingredient to the blender jug, the

weight will be added to the display.

5. Press the button in order to stop the weighing

function. The start menu appears again.

Weighing with the Tara function

With the Tara function you can reset the display of the

scale to 0 grams and then add new items to be weighed.

1. The device is switched on but no other cycle is in op-

eration.

2. Press the button 32. The touchscreen8 shows 0 g.

3. Place the item to be weighed into the blender jug5.

On the touchscreen8, the weight will be shown in

grams up to 5 kilograms.

4. Press the display dial to set the weight indicator to 0 g.

5. Add the new object to be weighed to the existing ob-

ject to be weighed.

The touchscreen8 will now show only the weight of

the new object in grams.

6. If necessary, repeat the process with new items to be

weighed.

7. Press the button in order to stop the weighing

function. The start menu appears again.

10.11 Overflow hole

In the holder of the blender jug11 there is an overflow

hole12.

Should liquid escape from the blender jug5, this will not

collect in the base unit13, but can escape via the over-

flow hole12 onto the work surface.

Tare

11

__317552_MC-Connect_GB.book Seite 18 Donnerstag, 21. März 2019 10:53 10

Page is loading ...

Silvercrest SKMC 1200 C3 Operating Instructions Manual

Brand: Silvercrest

Model: SKMC 1200 C3

Category: Blenders

Type: Operating Instructions Manual

This manual is also suitable for

Download PDF

report

Silvercrest SKMC 1200 C3 Operating Instructions Manual

This manual is also suitable for

Silvercrest SKMC 1200 C3 Operating Instructions Manual

Related papers

Other documents