Home Styles 5420-3128 Assembly Instructions

Home Styles
Brand
Home Styles
Model
5420-3128
Type
Assembly Instructions

This manual is also suitable for

Home Styles 5420-3128

The Home Styles 5420-3128 is a dining bench that is easy to assemble and can be used in a variety of settings. The bench is made of sturdy materials and is designed to last. With its classic design, the bench can complement any home décor. With the adjustable levelers on the bottom of its legs, you can customize it to fit your needs. The bench is also easy to clean and maintain, making it a great choice for busy families.

Here are some of the features and possible use cases of the Home Styles 5420-3128:

  • Sturdy construction: The bench is made of sturdy materials and is designed to last.

Home Styles 5420-3128

The Home Styles 5420-3128 is a dining bench that is easy to assemble and can be used in a variety of settings. The bench is made of sturdy materials and is designed to last. With its classic design, the bench can complement any home décor. With the adjustable levelers on the bottom of its legs, you can customize it to fit your needs. The bench is also easy to clean and maintain, making it a great choice for busy families.

Here are some of the features and possible use cases of the Home Styles 5420-3128:

  • Sturdy construction: The bench is made of sturdy materials and is designed to last.
Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected],
888-680-7460, 877-831-0319
Tool(s) required for assembly: Level
20 05420 0029
Dining Bench
IMPORTANT
A.
Seat
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
B.
Leg
4 pcs.
C.
Stretcher
1 pc.
D.
Peg
2 pcs.
M6x20
Head Cap Bolt
24 pcs. (+1 extra)
Spring Washer
24 pcs. (+1 extra)
Flat Washer
24 pcs. (+1 extra)
Plate
4 pcs.
Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Attach Plates to Legs (B) with
Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 1)
B
B
B
B
Head Cap Bolt
Spring Washer
Flat Washer
Plate
STEP 2
Attach Legs (B) together.
B
B
B
B
Assembly Instructions 3/3
Figure 2
C
STEP 3
Place Seat (A) upside down on a soft cloth.
Attach leg unit to Seat (A) with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway. (See Figure 2)
Insert Stretcher (C) into hole in leg unit.
Attach leg unit to unit with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
Tighten all bolts used in this step.
A
Head Cap Bolt
Spring Washer
Flat Washer
STEP 4
Turn unit over to its upright position.
Insert Pegs (D) into holes in stretcher until snug. (See Figure 3)
Level unit by adjusting the adjustable levelers on bottom of legs.
(See Figure 4)
Figure 3
D
D
Figure 4
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected],
888-680-7460, 877-831-0319
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Home Styles 5420-3128 Assembly Instructions

Home Styles
Brand
Home Styles
Model
5420-3128
Type
Assembly Instructions
This manual is also suitable for

Home Styles 5420-3128

The Home Styles 5420-3128 is a dining bench that is easy to assemble and can be used in a variety of settings. The bench is made of sturdy materials and is designed to last. With its classic design, the bench can complement any home décor. With the adjustable levelers on the bottom of its legs, you can customize it to fit your needs. The bench is also easy to clean and maintain, making it a great choice for busy families.

Here are some of the features and possible use cases of the Home Styles 5420-3128:

  • Sturdy construction: The bench is made of sturdy materials and is designed to last.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents