2. Computers & electronics
  3. Computer cables
  4. Cable assembly tools
  5. Pro-Ject
  6. Signature Headshells

Pro-Ject Signature Headshells Product information

  • Hello! I am an AI chatbot trained to assist you with the Pro-Ject Signature Headshells Product information. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PRODUCT INFORMATION
Technical data and price changes reserved.
Page 1/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Weight Oak: 8g
Weight Carbon: 10g
Weight Aluminium: 12g
Connection: Colour coded cables
• Fits all tonearms with SME mounting standard
• 1/2 inch cartridge mount
• 3 different headshell materials: Alu, Carbon,
Oak
• High conductivity OFC headshell cables
inclu-ded
• High rigidity & low mass
• Low resonance construction
• Non magnetic
• Azimuth adjustment with screw on side
• Built-in fingerlift
Signature Headshells
Cartridge mounting with SME standard
connection
Aluminium MSRP 125 € (incl. VAT)
Carbon MSRP 99 € (incl. VAT)
Oak 99 € (incl. VAT)
Colour options:
PRODUCT INFORMATION
Technical data and price changes reserved.
Page 2/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Adjusting the azimuth
Having a correct azimuth setting maximises playback quality. Using the mirror from alignment tool „Align it“
helps to nd a correct setting - see following graphics:
If cartridge body is declined to left or right side, plea-
se loosen Azimuth screw and turn headshell carefully
in the opposite direction. The correct position is
found, when the cartridge body is 100 parallel to the
mirror (record). After setting has been nished, tigh-
ten Azimuth screw and start playback!
Azimuth adjustment screw
/