2. Pro-Ject Audio Systems
  3. Aluminium Signature Headshell

Pro-Ject Audio Systems Aluminium Signature Headshell Product information

  • Hello! I am an AI chatbot trained to assist you with the Pro-Ject Audio Systems Aluminium Signature Headshell Product information. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Update: MH Datum: 14.07.2016
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Product information
07.2016
Signature Headshells
Cartridge mounting with SME standard connection
 Fits all tonearms with SME mounting standard
 1/2 inch cartridge mount
 3 different headshell materials: Alu, Carbon, Beechwood
 High conductivity OFC headshell cables included
 High rigidity & low mass
 Low resonance construction
 Non magnetic
 Azimuth adjustment with screw on side
 Built-in fingerlift

 Aluminium
 Colour coded cables
 Weight 12g
Headshell Signature alu
SRP
125,00 €
 Carbon
 Colour coded cables
 Weight 10g
 Oak
 Colour coded cables
 Weight 8g
Headshell Signature carbon
SRP
99,00 €
Headshell Signature wood
SRP
75,00 €
measurements in mm
Adjusting the azimuth:
Having a correct azimuth setting maximises playback quality.
Using the mirror from alignment tool „Align it“ helps to find
a correct setting - see following graphics:
If cartridge body is declined to left
or right side, please loosen Azimuth
screw and turn headshell carefully
in the opposite direction. The cor-
rect position is found, when the
cartridge body is 100 parallel to the
mirror (record). After setting has
been finished, tighten Azimuth
screw and start playback!
/