8.
PROCEDURE
8.1.
Using the Hex Head Plate Bolts (4), secure the wake
board racks (7) to the oval plate (5).
8.2.
Using the Hex Head bracket bolts (1) and the rail
clamps (2), secure the pivot block (3) to the arch rail (8).
8.3.
Using the Hex Head pivot block bolt (6), fasten the
wake board rack to the pivot block.
NOTE: Before tightening the pivot block bolt, rotate the
wake board rack unit to a desired position.
Wake Board Rack Installation Is Complete
When determining the position of the wake board
rack on the arch assure that the unit will not
compromise the safe handling of the boat or pose
a hazard to the passengers.