WINGBO WBWL-GL05-BK User manual

Hello! I've reviewed the user manual for the lighting fixture. This document provides detailed instructions on how to safely assemble and install your new fixture, including steps for electrical connections and mounting. It also provides a list of compatible bulb types. I'm ready to assist with any questions you have about this device or the contents of the manual.
What should I do before starting the installation?

What is the first step of the assembly?

How to install the shade?

ASSEMBLY INSTRUCTIONS

This fixture has been rated for up to 3.8*3-Watt maximum light with LED SMD 2835

The lighting fixture is meant for indoor use.

ASSEMBLY

Please follow the steps (1-5) to install the lighting fixture.

1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit

breaker or fuse box before beginning.

2. Take the wall bracket off the canopy, Connect your wall bracket to your junction box (not included) using the provided

screws.

3. Make electrical connections using the wire nuts.

4. Being careful that no wiring is left exposed, place the canopy against the mounting surface.

Secure the canopy to the wall bracket with the 2 previously removed ball nuts.

5. Install the shade to the socket.

Thanks for your purchase!

Should you have any questions or concerns, please do not hesitate to contact us by mail address

support@wingbolighting.com

WARNING:

.Check for electric, gas, & plumbing lines before drilling or consult a professional.

.Turn off your electricity at the circuit breaker or main fuse box before installation. Do not restore power to

the line until the light has been fully installed.