WINGBO WBWL-KY05-BK User manual

Type
User manual
ASSEMBLY INSTRUCTIONS
WARNING:
.Check for electric, gas, & plumbing lines before drilling or consult a professional.
.Turn off your electricity at the circuit breaker or main fuse box before installation. Do not restore power to
the line until the light has been fully installed.
.Do not use with bulbs exceeding the recommended wattage.
.Always switch off the electricity supply and allow bulbs to cool for 10 minutes before changing.
This fixture has been rated for up to one (1) E26 Socket 60-Watt maximum light bulbs or LED equivalent
bulbs (not included). To avoid the risk of fire, DO NOT EXCEED THE RECOMMENDED LAMP WATTAGE.
The lighting fixture is meant for indoor use.
ASSEMBLY
Please follow the steps (1-5) to install the lighting fixture.
1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit
breaker or fuse box before beginning.
2. Take the wall bracket off the canopy, connect your wall bracket to your junction box (not included) using the provided screws.
3. Make electrical connections using the wire nuts.
4. Being caref ul that no wiring is lef t exposed, place the canopy against the mounting surf ace. Secure the canopy
to the wall bracket with the 2 previously removed screws,install the shade to the socket, install the light bulbs ,then install the
metal pipe .
5. Turn on the light.
Thanks for your purchase!
Should you have any questions or concerns, please do not hesitate to contact us by mail address
0FF
1
4
2
1
2
N
L
white/blanc
black/Noir
Ground wire/
Fil de mise a terre
3
3
5
ON
1
2
3
  • Page 1 1

WINGBO WBWL-KY05-BK User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI