INSTALLATION INSTRUCTIONS
SKU: TF040902 Can-Am Center Seat Kolpin Mount Page 3
FIG 1 - Attach Kolpin gun mounts to plate using 7/16” Wrench & #3 Phillips Bit.
Fasten Kolpin Mounts to Mount Plate
Using provided hardware in Kolpin kit, fasten pair of Kolpin gun mounts
to center seat Kolpin mount plate with 7/16” wrench and #3 phillips bit
and drill (FIG 1).
FIG 2 - Using #3 Phillips Bit and Drill attach Plate to underside of Seat
Fasten Kolpin Mount Plate to Center Seat
Attach center seat Kolpin mount plate to the underside of the center
seat using 4 X 1/4” -20 X 5/8” pan head screws (A) into existing
factory holes using the #3 phillips bit and drill (FIG 2).
