Stream 200

Sirus Stream 200 User guide

  • Hello! I've reviewed the quick start guide for the Sirus Stream 200 audio streamer. This guide covers important safety information, connection instructions using Legacy Player App, operating elements and the product's features, including Wi-Fi and LAN connectivity, USB playback, and support for various audio formats. I'm ready to answer any questions you have about the device.
  • What is the main purpose of this device?
    What kind of connection I can use?
    What type of audio files this device supports?
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 526879_22.08.2022
Stream 200 – Wireless Audio Streamer
Quick start guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include this
quick start guide.
EN
Features
Wi-Fi or LAN connection to Ethernet
USB port for playing music from storage devices
Control via Legacy Player App (iOS® and Android®)
Supports Apple AirPlay and DLNA
Audio le formats: MP3, WMA, AAC, AAC+, ALAC, FLAC, APE, WAV
Wi-Fi supports 802.11 b/g/n
19" rack adapter and mounting bracket included
External power adapter included
Safety instructions
Intended use
This device is used to receive streamd audio data from dierent sources and to trans-
mit the data to suitable playback devices. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swal-
low the pieces and choke! Never let children unattended use electrical devices.
Where to use the product
Never use the product
in conditions of extreme temperature or humidity
in extremely dusty or dirty areas
next to a heat source or near an open re
at locations where the unit can become wet
Notes on wireless transmission
The system works in the frequency range 2.400 GHz … 2.4835 GHz and 5.729 GHz …
5.820 GHz and is free of charge and registration worldwide.
General handling
To prevent damage, never use force when handling the product.
Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.
Disconnect the device from the mains power supply when it is not in use.
Operating elements
ö Status LED (green)
# Line input, 3.5 mm jack socket (TRS)
$ Signal input LED: red – USB, purple – Line In
% USB input
& Antenna
ä WPS button and status LED (blue)
( Connection for external power adapter
) Output connections, 2 × XLR panel plug, 2 × 6.35 mm jack socket
* Ethernet connection, RJ45 socket
'$&
%ö#
POWER
5V2A
Balanced
*)(
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 526879_22.08.2022
Stream 200 – Wireless Audio Streamer
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected
for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your lo-
cal waste disposal facility.
EN
Using the product
The device is operated via the App "Legacy Player" which is available for iOS® and
Android®.
1. Download the App to your mobile device and install it.
2. Follow the instructions of the App and press "Add Device".
3. Open the Wi-Fi settings of your mobile device and establish a connection with the
device.
4. Select your network and enter, if necessary, the network password.
5. After a few seconds, the connection will be established. The device will appear in
the device list of your mobile device.
Technical specications
Input connections Power supply Micro-USB for power adapter
Line In 3.5 mm jack socket (TRS)
USB USB A
Ethernet RJ45 socket
Output connections 2 × XLR panel plug
2 × 6.35 mm jack socket, unbalanced
Output level adjustment +12.5 dB
Frequency of operation 2.400 GHz … 2.4835 GHz and 5.729 GHz … 5.820 GHz
Wi-Fi Standard 802.11 b/g/n
Sensitivity –3.5 dBm
Antenna gain 16 dBm
Bandwidth 20 kHz … 30k Hz, –3dB
Connection examples
USBDVD Router
Power
Amplier
Input impedance 22 kΩ
Audio le formats MP3, WMA, AAC, AAC+, ALAC, FLAC, APE, WAV
Total harmonic distortion (THD) <0.09%
Signal-to-noise ratio >80 dB a WTD
Frequency response 20 Hz … 22 kHz
Power supply external power adapter, 100 - 240 V 50/60 Hz
Operating voltage 5 V / 2 A
Dimensions (W × H × D) 143 mm × 45 mm × 93 mm
Weight 0.5 kg
Ambient conditions Temperature range 0 °C...40 °C
Relative humidity 20 %...80 % (non condensing)
/