ETM 70 Handheld Cellular Signal Analyzer User guide
- Category
- Smartphones
- Type
- User guide
ETM 70 Handheld Cellular Signal Analyzer is a versatile tool for cellular network measurements, enabling you to determine the best operator, check IP connection and signal strength, select the best antenna, send measured data to a server, and check parameters like Lac and cell.
ETM 70 Handheld Cellular Signal Analyzer is a versatile tool for cellular network measurements, enabling you to determine the best operator, check IP connection and signal strength, select the best antenna, send measured data to a server, and check parameters like Lac and cell.
ETM770
• 2G/3G/4G/LTE Cat M1/LTE Cat NB1,2 worlwide coverage
• Monochrome OLED display
• Rechargeable battery with long lasting battery life
• Mini USB for programming and charging
• Includes antenna, hard case and charger
FEATURES
ETM770 is a handheld signal analyzer
for cellular 2G/3G/4G/Cat M1/Cat NB network measurements.
ACCESSORIES
• Determine the best operator
• Check signal strength & coverage
• Send measured data to server
• Check working IP connection
• Select the best antenna
• Check parameters like Lac, cell
Common applications include:
Quick Start Guide
Welcome to your ETM Product
Get started: This guide helps with initial product setup. Need more? Find
additional product information by simply scanning the QR code.
ETM Mätteknik AB (HQ)
Ekbacksvägen 32, 168 69, Bromma, Sweden
Tel: +46 (0)8 25 28 75 E-mail: sales@etmiot.se
www.etmiot.se
ETM Pacific Pty Ltd (APAC)
Suite 6, 273 Alfred Street, North Sydney NSW 2060, Australia
Tel: +61 (0)2 9956 7377 E-mail: [email protected]om.au
www.etmiot.com.au
Support: ETM oers multiple support options to help you
get the most out of your product. You can go onto
www.etmiot.com or e-mail support@etmiot.com
If urgent, please call us using the numbers below.
CELLULAR SIGNAL ANALYZER
ETM770 VERSIONS & COVERAGE
Model ETM770-LTE ETM770-IoT ETM770-PRO
Part.no 20593 20594 20595
Module Cinterion PLS63-W Cinterion TX62 PLS63-W & TX62
GNSS - GPS/GLONASS/BeiDou/Galileo/QZSS GPS/GLONASS/BeiDou/Galileo/QZSS
GSM/GPRS (2G) 850/900/1800/1900MHz 850/900/1800/1900MHz 850/900/1800/1900MHz
UMTS (3G) 1, 2, 3, 4, 5, 6, 8, 9, 19 -1, 2, 3, 4, 5, 6, 8, 9, 19
FDD-LTE (4G)
TDD-LTE (4G)
1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28, 66
38, 40, 41
-
-
1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28, 66
38, 40, 41
FDD-LTE
(Cat M1, NB1,
NB2)
-
1, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 25, 26, 27,
28, 66, 71, 85
1, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 25, 26, 27, 28,
66, 71, 85
Antenna
Power Adapter
USB to Mini USB
Adapter
Carrying case
On/O/Restart
Turn o Hold power button (3s)
Restart Device Option 1:
Hold Arrow Up & Arrow Down (5s)
Option 2:
Navigate System > Restart Device
Buttons/Navigation
OK Button Action button/Forward navigation
Arrow Up Used for navigation
Backwards button
Arrow Down Used for Navigation
There is an ETM770 user guide available on Youtube, use
the link or scan the QR code to watch:
https://www.youtube.com/watch?v=kGrbhHnXsos&t=117s
WANT A VIDEO USER GUIDE?
USB Car Charger
1. SCANNING A SIGNAL
Getting Started
Using the ETM770
3. SYSTEM 4. CONFIGURING THE ETM770
ETM PRODUCTS
DeltaBlue
Outdoor and
battery-powered
remote monitoring,
alarming & logging
solution
DeltaBlack
Industrial cellular
remote monitoring,
alarming & logging
solution
ETM-770
Cellular Network
Monitoring tool
Cat M1/Cat NB2
2G/3G/4G
2. ADDITIONAL FUNCTIONS
1. Choose the radio band/bands that you wish to scan.
ETM-Purple
Intelligent cellular
2G/3G/4G
with ”last gasp”
Device Data
Page 1: SIM card number, software version, hardware number, IMEI number
Page 2: Date/time, internal temperature, supply voltage, battery voltage
Select APN
Select which APN you wish to use for uploading scanned data to a server
Select User/PassW
Some APNs require username/password. Add and select the right user in this tab.
Server Address
Displays the added server adresses and ports
Restart Device
Restart the device without using the buttons.
2. Search and select a network operator that is using one
or more of your selected radio bands.
3. When radio bands and network operator
is selected, you can proceed to scan a
signal by navigating to ”Scan Signal”.
1. Navigate main menu > Send Data to Server > Send Last Scan
2. To change the IP-Address for sending, please see ”4. Configuring the
ETM770”
4. EWO (ETM WEB OFFICE)
To access the ETM IoT Cloud Dashboard, please visit the
website or scan the QR Code.
www.etmweboce.com/EWO/pages/login.jsp
• Log in using the provided login credentials
• Manage your account, units and organisation in the settings.
• Under settings > configuration choose which data you want to be presented
• Enjoy your ETM product
ETM
1. Navigate main menu > Communication Test > PING ”IP-Adress”
2. This will send three tests to the selected server. It shows ”success” or
”fail”. Ping round trip time in milliseconds.
3. To change the PING address, please see ”4. Configuring the ETM770”
An easy way to configure the ETM770 unit is by using SMS Commands. Simply
send an SMS with the following syntaxes to the device’s cellular number.
Change PING address
Example
ET-IP3=”IP Address”:”Port”
ET-IP3=8.8.8.8:80 (Google’s server)
Change server address
Example
ET-IP1=”IP Address”:”Port”
ET-IP1=54.77.219.177:7162 (EWO server)
Change APN list
Example
ETSAPN=”List position”, ”APN name”
ETSAPN=1, m2m.tele2.com
Change User/password
Example
ETSUP=”List position”, ”Username”, ”Password”
ETSUP=1,username1,password1
SMS COMMANDS
When it comes to configuring the ETM770 there are two options:
1. Using the Configuration Tool to configure with a computer via the
provided USB Cable. Please see ETM770 User Guide available on our
website etmiot.com
2. Configuring the unit wirelessly using the SMS commands:
SEND DATA TO SERVER
COMMUNICATION TEST
SIGNAL ANALYSIS EXPLANATION
RSSI (dBm) Recieved Signal Strength Indicator
RSRP (dBm) Reference Signal Recieved Power
RSRQ (dB) Reference Signal Recieved Quality
SINR (dB) Signal to Interference plus Noise Ratio
Important!
The SIM card used must have
PIN DISABLED
-
1
-
2
ETM 70 Handheld Cellular Signal Analyzer User guide
- Category
- Smartphones
- Type
- User guide
ETM 70 Handheld Cellular Signal Analyzer is a versatile tool for cellular network measurements, enabling you to determine the best operator, check IP connection and signal strength, select the best antenna, send measured data to a server, and check parameters like Lac and cell.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Perle IRG5000 LTE User guide
-
Quectel BG95-N1 Hardware Design
-
Ublox SARA-R5 Series User manual
-
-
Teltonika FMM003 Advanced OBDII Tracker User manual
-
Westermo MRD-405 Industrial 4G LTE Router User guide
-
amber connect ACT400-m User guide
-
Eurotech DynaGATE 20-30 Owner's manual
-
RACOM M!DGE2 User manual
-
Hirschmann OWL 4G Australia User manual