Crutchfield 82-3024 User guide

Brand: Crutchfield

Model: 82-3024

Type: User guide

1. Use two (2) screws to secure speaker adaptor bracket

to a stationary surface that can be used as a backup

for drilling (Figure 1).

2. Choose a hole saw to match the opening size for the

tweeter to be installed. Using the dimple in the center

of the bracket as the center for the hole, cut out

opening for the tweeter (Figure 2).

Note: Depending on the application, some tweeters

can be surface mounted to the adaptor bracket without

drilling.

3. Remove screws and remove bracket from backup

surface.

4. Secure tweeter to adaptor bracket using the method

described and hardware supplied with the tweeter

purchased. Note: Additional drilling may be required.

5. Make connections to vehicle speaker wires and

secure speaker/bracket assembly to location (Figure 3).

Speaker Adaptor Bracket

Tools Required

120 82-3024

Phillips

Screwdriver

Parts

Supplied:

(2) Brackets

Revision 07/14/21

*120823024*

6

It may be necessary to acquire screws to mount the speaker/

bracket assembly to the location.

IMPORTANT

!

Copyright 2021 Crutchfield Corporation

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials. If an item

is missing, please call Crutchfield at 1-888-955-6000.

FIGURE 3

FIGURE 1

FIGURE 2

Speaker Adaptor BracketSpeaker Adaptor Bracket

DimpleDimple

Drill &

Hole Saw

1

Crutchfield 82-3024 User guide

Brand: Crutchfield

Model: 82-3024

Type: User guide

Download PDF

Related papers

Other documents