Monster MH11906 User guide

Category
Headphones
Type
User guide
MONSTERISPORTSOLITAIRELITE
ModelNo.:MH11906
Quick Start Guide
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
Headphone
Eartips x 3 Pairs (M size is installed on the headset)
SportClip™ x 3 Pairs (M size is installed on the headset)
Charging Cable
Quick Start Guide & Warranty letter
1. Volume Down Button, Track Forward
2. Multi Function Button (MFB) (Power On/Play/Pause…)
3. Volume Up Button, Track Back
4. IndicatorLight
5. USB-C Charging Port
6. MIC
Power On/Off
In power off mode, press and hold the MFB for about 2 seconds to power on the
headphones, the white indicator on for 1 second and you will hear “Power on”.
In power on mode, press and hold the MFB for about 5 seconds to power off the
headphones, the white indicator on for 1 second and you will hear “Power off”.
Pairing
In power off mode, press and hold the MFB for about 5 seconds until indicator light flashes
white, you hear “Power on”…”Pairing”. Now headphones are in pairing mode. Activate
Bluetooth® on your equipment and set it to search for new devices (new Monster device).
When the headphones are paired successfully, “connected” will be heard.
Note: When you unbox the headphones and power it on for the first time, it will enter to
pairing mode automatically.
Music
Play/Pause: In the music playback mode, press the MFB to play/pause music.
Previoussong: In the music playback mode, press and hold the Volume Down Button for 2
seconds for previous song.
Nextsong: In the music playback mode, press and hold the Volume Up Button for 2
seconds for next song.
Sound characteristics: Press and hold the volume plus and minus 3 seconds, switch from
Normal” to Turbo” will have two “di di” beeps, and switch from Turbo to Normal will
have “di” beep.
Volume Control
Short press the Volume Up or Down Button to turn volume up or down, you hear tone
once you reach the maximum volume or minimum volume.
Call
Answer/End Call: short press the MFB.
Reject Call: long press the MFB about 2 seconds.
Voice Control
After connecting to the phone, quickly double press the MFB to activate the voice
assistant.
LED Guide to Indicator Lights
ModeDescription Voiceprompts
Power On White LED indicator lights for about 1 second “Power On”
Power Off White LED indicator lights for about 1 second “Power Off”
Pairing White LED flashes quickly “Pairing”
Connected No function operation, the indicator light is off “connected”
Charging The white LED indicator lights up when charging, and turns
off when fully charged
-
Note:
*Pleaseputtheearphonesinthecorrectpositiontocharge.
*Itisnotrecommendedtoreplacethebatteryprivately.
*Thebattery(batterypackorcombinationbattery)mustnotbeexposedtoexcessiveheatsuch
assunlightorfire.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Monster MH11906 User guide

Category
Headphones
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI