2. GVM
  3. -PRO-YU150R LED Video Lights Panel
-PRO-YU150R LED Video Lights Panel

GVM -PRO-YU150R LED Video Lights Panel, PRO-YU150R LED Video Lights Panel User manual

  • Hello! I am an AI chatbot trained to assist you with the GVM -PRO-YU150R LED Video Lights Panel User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GVM-PRO-YU150R
C O N T E N T S
Product introduction -------------------------------------------- Page 1
Disclaimers --------------------------------------------------------- Page 1
Product parameter ---------------------------------------------- Page 2
Product structure icon ------------------------------------------ Page 3
Installation method ------------------------------------------ Page 4~8
Description of product control keys ----------------------- Page 9
Function introduction & instruction for use -------- Page 10~11
APP Control ------------------------------------------------- Page 12~13
Ues and save ---------------------------------------------------- Page 13
Simple faults and troubleshooting ------------------------ Page 14
Packing list -------------------------------------------------------- Page 15
Precautions ------------------------------------------------------- Page 15
1
② Has 6 lighting modes : CCT, HSI, RGB, GEL color paper, light source
matching, and field light effect. Brightness, color temperature, hue,
saturation, and RGB color can be freely controlled.
The main features of the product are:
Welcome to "GVM-PRO-YU150R", this product is specially designed for
senior photography enthusiasts. The product is suitable for live streaming
/ outdoor / studio photography, and also for YouTube video shooting.
① LED beads with high CRI, help to restore and enrich the color of
objects, providing you with natural and vivid shooting effects.
③ APP control, which can be controlled by your iOS and Android smart
mobile devices; At the same time, it supports Bluetooth Mesh
networking, and can work with GVM brand devices that support Mesh
networking to ready for group control.
We believe that once using our product correctly, you can make huge
progress when shooting. Before using the product, you are strongly
recommended to read the instructions below carefully.
④ With a standard DMX interface, it can realize DMX control of low-
precision 8bit and high-precision 16bit control modes.
PRODUCT INTRODUCTION
DISCLAIMERS
1.Before using this product, please read the instructions carefully and make
sure to use the product correctly. If you don’t obey the instructions and
warnings, you maybe cause harm to yourself and the people around you
or even damage the product and other things around.
3.Design and specifications are subject to change without notice.
2.Once you use this product, you are deemed to have read the disclaimer
and warning carefully, understand and acknowledge all the terms and
contents of this statement, and promise to take full responsibility for the
use of this product and possible consequences.
PRODUCT PARAMETER
Brand: GVM
Product Name: Photography light
Product type: photography fill light
Product model: GVM-PRO-YU150R
Functions/features: Multi-scene mode / Bluetooth meshnet working /
APP(Bluetooth connection) / DMX / high-definition indicator lamp beads
Lumen: 17200lux/0.5m; 4640lux/1m
Lamp beads quantity: 1060 lamp beads
Color rendering index : ≥97
Color temperature: 2000K~10000K
Light adjustment method: Stepless adjustment
Product net weight: 3.5KG
Maximum power: 150W
Cooling: Active cooling by fans
Power supply mode: AC input & battery/DC power supply (Note: It needs
two V button batteries to supply power at the same time to light up)
AC input: 100V~240V
DC input: 24V~36V
Product Size (mm): 360×360×135
Product material: aluminum alloy / engineering plastic
Commodity origin: Huizhou, China
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
2
3
Carrying handle
Locking screw
handle
Carrying handle
Locking screw
handle
Battery plate
Battery plate
Accessory lock
AC input
Power switch
DC/Battery input
DMX interface
PRODUCT
STRUCTURE ICON
2
1
4
INSTALLATION METHOD
Loosen the lamp holder fixing knob, install the lamp on the lamp
holder as shown in the figure below, and then tighten the lamp holder
to fix the knob.
Loosen the locking screw handle, adjust the angle of the light, and
then tighten the locking screw handle.
3
AC power cord connector
DC/Battery powered
interface (①+/②-)
4
5
Connect the AC power cord for the power supply.
The DC battery cable is connected to the power supply.
5
6
7
Install two V-button batteries on the U-shaped frame, and then
connect the batteries through the battery cable and light to supply
power. (V button battery needs to be purchased separately)
The installation steps of the diffuser are shown in the figure below.
6
7
7
The installation steps of the barn door are shown in the figure below.
(The barn door needs to be purchased separately)
The installation steps of the Honeycomb Grid are as follows.
(Honeycomb Grid needs to be purchased separately)
8
8
The installation steps of the softbox are shown in the figure as below.
(Softbox needs to be purchased separately)
4
5
6
8
1
7
2
3
4
5
6
2
8
1
7
3
9
DESCRIPTION OF
PRODUCT CONTROL KEYS
knob①: INT/SELECTOR/R, Multifunctional coding knob, "INT/SELECTOR/
R" can be adjusted by pressing or rotating
knob③: SAT/GM/B, Multifunctional coding knob，"SAT/GM/B" can be
adjusted by rotating
knob②: CCT/HUE/G，Multifunctional coding knob, "CCT/HUE/G" can be
adjusted by rotating
Display: Displays current settings, modes, and parameters
BACK: Press this key to return to the previous menu
MENU: Press this key to enter the settings menu
MODE: Lighting mode switch button
ON/OFF/COOL KEY: When the light is off, long press to turn on the light;
when the light is on, long press to turn off the light, and activate the
large air volume to dissipate heat until the temperature is lowered to a
touchable temperature.
10
① Menu (MENU) :
BT SETTINGS(Figure3) : bluetooth switch, BT Reset
Press the MENU button to enter the menu setting page → Rotate
[Knob①] select project → Press [Knob①] Enter the project settings
interface → Press or rotate [Knob①] set the parameters of the project →
Press [BACK] Return to the previous menu
SYSTEM SETTINGS(Figure8) : View system information and Factory Reset
DMX SETTINGS(Figure1) : SETTINGS DMX parameter, [ADDRESS(001-512)]
and [PROFILES MODE(8bit/16bit )]
STUDIO Mode(Figure4) : Setting up studio mode and non-studio mode
FAN SETTINGS(Figure6) : Set the cooling fan mode
DIM CURVE(Figure2) : Set DIM CURVE, [Linear, Log, Exp, S]
FREQUENCY SETTINGS(Figure5) : SETTINGS Dimming Frequency
LANGUAGE(Figure7) : Set system language
Figure1 Figure2
Figure3 Figure4
Figure5 Figure6
Figure8Figure7
FUNCTION INTRODUCTION &
INSTRUCTION FOR USE
DMX SETTINGS
DMX SETTINGS
PROFILES
8bit
16bit
ADDRESS
1
Bluetooth
BT Reset YES NO
25000Hz
简体中文
ENGLISH
ON
BT SETTINGS
BT SETTINGS
MENU
FREQUENCY SETTINGS
FREQUENCY SETTINGS
MENU
LANGUAGE
LANGUAGE
MENU
MENU
Linear Exp
Log S
Smart High Silent
SYSTEM SETTINGS
FW Ver: V1.0
UID: GY150R-US
Factory Reset YES NO
ON
DIM CURVE
DIM CURVE
STUDIO
STUDIO
MENU
FAN SETTINGS
FAN SETTINGS
MENU
SYSTEM SETTINGS
MENU
MENU
11
② Mode key (MODE) :
CCT MODE : [Knob1] Adjust INT, [Knob2] Adjust CCT,
[Knob3] Adjust G/M
GEL MODE (GEL) : Rotate and short press [Select ] key to
select GEL mode, select 3200K or 5600K color temperature
(CCT), and select the corresponding color paper of Rosco
or LEE brand to output the desired light.
RGB MODE : [Knob 1] Adjust overall INT, Press [Knob 1]
Button, Switch to RGB adjustment, [Knob 1] Adjust the
brightness of the red light, [Knob2] Adjust the brightness
of the green light, [Knob 2] Adjust the brightness of blue
light.
Source MODE (Source) : Rotate and short press [Select]
key to select Source mode, choose the desired light source
effect
EFFECT MODE (EFFECT) : Rotate and short press [Select]
key to select FX mode, A variety of light effects are
available: Lightning, CCT Loop, candle, Bad bulb, TV,
Paparazzi, Explosion, Pulsing, Disco, Cop Car, Hue Loop.
Press the [MODE] button to enter the mode selection main
page → rotate [Knob 1] to select the mode → press [Knob
1] to enter the corresponding mode interface →Set the
parameter of the project by pressing or rotating [Knob 1]
→ press [BACK] Back to previous
HSI MODE : [Knob 1] Adjust INT, [Knob 2] Adjust HUE,
[Knob 3] Adjust SAT
CCT HSI RGB
GEL Source Effect
CCT
INT
10.5%
CCT
6800K
G/M
0
HSI
INT
10.0%
HUE
SAT
0
100%
°
RGB
INT
11.2%
G
10
R
84
B
10
Effect
INT
18.1%
CCT
10000K
SPD
1
Lightning
INT
10.0%
GEL
INT
100.0%
3200K 5600K
RL
L002 Rose Pink
L007 Pale Yellow
L019 Fire
L021 Gold Amber
L025 Sunset Red
L026 Bright Red
Source
Tungsten
12
APP CONTROL
APP download method
(Scan the QR code on the back of the manual to download the APP)
Android version : Official website QR code, Google Play,
Huawei Store, etc.
iOS version : App Store
Register account
Use your email to register and log in; (Figure 1)
There may be a delay in sending the verification code,
and the delivery speed depends on the email server
you use;
Some email servers may recognize our verification
emails as advertising promotions, please check your
blocked email box.
Add device
② Click the "Add Devices" button on the "My Devices"
page to search for nearby Bluetooth lighting
devices that have been turned on, and select the
device that needs to be connected for network
connection. (Figure 2)
* The Android system requires location permission to
be enabled to connect the device using Mesh
technology, and we will not collect any location
information from you during this process.
① Before adding a device, please make sure that you
have turned on the Bluetooth and network data
functions of your mobile phone, and reset the
Bluetooth of the light device;
Figure 1
Figure 2
13
Device management
① After successfully adding your
lighting device, your device
will be displayed in the "My
device" list; (Figure 3)
② Click the device bar to enter
the device control. (Figure 4)
Figure 3
Figure 4
USE AND SAVE
Guarantee: Do not modify the product, or you will lose the right to maintenance.
Accessories: Please use the accessories provided by the manufacturer and approved
ones, In order to maximize the performance.
Repairing: If there is a fault or performance degradation, do not unpack the shell by
yourself, avoiding damage to the machine and losing the right of maintenance. When
there is a fault, do not hesitate to contact us, and we will do our best to deal with the
problem.
Do not put the light in a highly humid, strong electromagnetic field, direct sunlight, or
high-temperature environment. If the light is not used for a long time, please
disconnect the power.
Power: Make sure the power is in the demanded range,not too high or too low.
Correctly load the battery, in order not damage to the machine.
Clean: Before cleaning, please unplug the power plug. And use a wet cloth rather than
any detergent or soluble liquid, to avoid damaging the surface layer.
14
SIMPLE FAULTS AND
TROUBLESHOOTING
Phenomenon Check the product Solution
The light is not
on after turning
on
After the APP
enters to add a
device, the
Bluetooth of the
device cannot be
searched.
The APP fails to
connect the
device to the
network
confifiguration of
the device.
The device
cannot be
searched after
being removed
from the APP.
The device in the
APP cannot be
clicked to enter
the control
①Whether the light is connected
t o t h e p o we r s up pl y i s
energized normally.
②When powered by a lithium
battery, make sure that the
battery does not have "low
battery" protection.
Check whether the device is
turned on normally and whether
it has been bound by others.
Check whether the device is
turned on normally and whether
it has been connected and bound
by others; check the Bluetooth of
the mobile phone and whether
the network is in good condition.
Whether to remove the device
when the device is offline or in
poor network conditions.
Check if the device is online (a
small green dot is displayed); if it
is offline, follow the steps of the
network connection failure step
to check.
Make sure the power cord plug
is in good contact.
Usin g t h e p ro duc t af ter
charging the battery.
Normal steps:
①Turn on the Bluetooth and
network data functions of
the mobile phone, the
Android system needs to
Enable location permissions;
②Reset device Bluetooth.
Retry the connection after
resetting the device Bluetooth
and restarting the APP.
After resetting the device's
Bluetooth, search again to add
the device.
Restart the device, wait for 5
seconds, it can be controlled
when it is displayed as online;
reset the device's Bluetooth,
and add the device to the
device list again.
15
Photography
Lights 1
Power Cable
Softbox
Name Quantity Notes
Carrying Case
1
PACKING LIST
Manual 1
Honeycomb
Grid
Need to be purchased
separately
Need to be purchased
separately
Need to be purchased
separately
Battery
Connection Cable 1
Barn Door
1
PRECAUTIONS
④ When you use the product make sure that the light is placed firmly to prevent it
from falling and being damaged;
③ The product is not anti-corrosion, please don't let the product come into contact
with any corrosive liquid;
⑤ When the light is not used for a long time, please turn off the power of it to save
energy consumption;
① When using DC/battery power supply, make sure the DC/battery power supply
voltage is 24-36V/180W range to achieve maximum brightness;
② The product is not waterproof, please use it in a rain-proof environment;
FacebookGVM Official
website
Download APP
Web: www.gvmled.com
B&H Email: bh@gvmled.com
GVM Email: support@gvmled.com
Amazon Email: amazonsupport@gvmled.com
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA
/