Installation instructions
1. Secure the frame-1 (B) and frame-2
(C) together with nipple (D) and nut (E)
according to the stickers.
DO NOT tighten the nut (E).
When assembling ensure that
all parts are firmly tightened. 2. Place the table top (A) onto a soft
and flat surface, then secure the frame-1
(B) and frame-2 (C) to the table top (A)
with four screws (F), according to the
stickers. (Allen wrench (G) included).
Tighten the nut (E).
3. Turn the table over, place on a flat
surface.
E
C
B
D
C
B
E
A
F
G
B & C
A