Annin Flagmakers 145950 Installation guide

Installation

Residential house-mounted flag poles are typically 5’ or 6’ and are best suited for a 2 1/2 ‘ x 4′

banner or 3′ x 5’ flag. A flag has metal rings called grommets on the heading, which are used to

attach the flag to the pole. A banner has a pole sleeve and the pole slides through the sleeve and

has a tab inside the sleeve that clips to the pole.

A two-way mounting bracket will allow you to fly your flag or banner on a 45-degree angle

(typical for flags) or 90-degree angle (typical for banners), simply a matter of personal

preference.

