Toro Height-of-Cut Blocks, GrandStand Mower Installation guide

Brand: Toro

Model: Height-of-Cut Blocks, GrandStand Mower

Type: Installation guide

FormNo.3431-326RevA

Height-of-CutBlocks

GrandStand

Mower

ModelNo.134-3945

InstallationInstructions

Installation

PreparingtheMachine

Note:Determinetheleftandrightsidesofthe

machinefromthenormaloperatingposition.

1.Parkthemachineonalevelsurface,disengage

thePTO,movethemotion-controlleverstothe

NEUTRAL-LOCKposition,andsettheparking

brake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Movetheheight-of-cutlevertotheTRANSPORT

position.

4.Movetheheight-of-cutpintothe7cm(2-3/4

inch)orlowerposition

5.Checktheairpressureinthereartires;referto

theOperator'sManualforthemachine.

CorrectingtheHeightof

Cut

1.Placetheheight-of-cutblocksbelowthemower

decksothatthedeckshellrestsontheblocks

whenyoulowerthedeck(Figure1).

Note:Ensurethattheblocksarenotdirectly

belowthebafesonthefrontofthedeckorthe

blades.

g284849

Figure1

1.Height-of-cutblocks(belowthedeck)

2.Lowerthedeckontotheblocks.

3.Verifythatonlythedeckshellisrestingonthe

blocks.

Note:Ensurethattheweightofthedeckrests

ontheblocksandthatthereisnotensionon

thelinkages.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3431-326*A

4.Lightlypullbacktheheight-of-cutleverwith1

ngerandnotethepositionoftheleverrelative

tothetangentoftheholeforthe7.6cm(3inch)

heightofcut(Figure2).

g035356

Figure2

1.Tangentfor7.6cm(3inch)heightofcut

5.Loosenthe2jamnutsontheheight-of-cut

linkage(Figure3).

g035357

Figure3

1.Jamnut

2.Height-of-cutlinkage

6.Adjustthelinkageuntiltheleveristangentto

the7.6cm(3inch)holewhenyoupullbackthe

leverwith1nger(Figure2).

7.Tightenthe2jamnuts.

8.Loosenthejamnutsandsideboltsintheyokes

forthedeckchainsandlinkages(Figure4).

g284848

Figure4

1.Topbolt

4.Sidenut

2.Jamnut

5.Chains

3.Yoke6.Linkages

9.Rotatethetopboltoftheyokesclockwiseuntil

thereisnoslackinthechainsandlinkages

(Figure4).

Note:Donotoveradjustthebolts.

Overadjustingmaypreventyoufromraisingthe

decktotheTRANSPORTposition.

10.Tightenthejamnutsandsidebolts(Figure4).

11.Verifythatyoucanraisethedecktothe

TRANSPORTposition.

12.Removetheheight-of-cutblocks.

Toro Height-of-Cut Blocks, GrandStand Mower Installation guide

Toro Height-of-Cut Blocks, GrandStand Mower Installation guide

Toro Height-of-Cut Blocks, GrandStand Mower Installation guide

Related papers

Other documents