2. Toro
  3. Height-of-Cut Blocks, GrandStand Mower

Toro Height-of-Cut Blocks, GrandStand Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Height-of-Cut Blocks, GrandStand Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3403-325RevB
Height-of-CutBlocks
GrandStand
®
Mower
ModelNo.133-1439
InstallationInstructions
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
Installation
PreparingtheMachine
1.Parkthemachineonalevelsurface,disengage
thePTO,movethemotion-controlleverstothe
NEUTRAL-LOCKposition,andsettheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Movetheheight-of-cutlevertotheTRANSPORT
position.
4.Movetheheight-of-cutpintothe7cm(2-3/4
inch)orlowerposition.
5.Checktheairpressureinthereartires;referto
theOperator’sManualforthemachine.
CorrectingtheHeightof
Cut
1.Placetheheight-of-cutblocksbelowthemower
decksothatthedeckshellrestsontheblocks
whenyoulowerthedeck(Figure1).
Note:Ensurethattheblocksarenotdirectly
belowthebafesonthefrontofthedeckorthe
blades.
g035355
Figure1
1.Height-of-cutblock(belowthedeck)
2.Lowerthedeckontotheblocks.
3.Verifythatonlythedeckshellisrestingonthe
blocks.
Note:Ensurethattheweightofthedeckrests
ontheblocksandthereisnotensiononthe
linkages.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3403-325*B
4.Lightlypullbacktheheight-of-cutleverwith1
ngerandnotethepositionoftheleverrelative
tothetangentoftheholeforthe7.6cm(3inch)
heightofcut(Figure2).
g035356
Figure2
1.Tangentfor7.6cm(3inch)heightofcut
5.Loosenthe2jamnutsontheheight-of-cut
linkage(Figure3).
g035357
Figure3
1.Jamnut
2.Height-of-cutlinkage
6.Adjustthelinkageuntiltheleveristangentto
the7.6cm(3inch)holewhenyoupullbackthe
leverwith1nger(Figure2).
7.Tightenthe2jamnuts.
8.Loosenthejamnutsandsideboltsintheyokes
forthedeckchainsandlinkages(Figure4).
g031416
Figure4
1.Topbolt
4.Sidenut
2.Jamnut
5.Chains
3.Yoke6.Linkages
9.Rotatethetopboltoftheyokesclockwiseuntil
thereisnoslackinthechainsandlinkages
(Figure4).
Note:Donotoveradjustthebolts.
Overadjustingmaypreventyoufromraisingthe
decktotheTRANSPORTposition.
10.Tightenthejamnutsandsidebolts(Figure4).
11.Verifythatyoucanraisethedecktothe
TRANSPORTposition.
12.Removetheblocks.
2
/