Makita HR4013C: This top-of-the-line rotary hammer boasts a potent 11 AMP motor capable of delivering 8.4 ft-lbs of impact energy, making it apt for heavy-duty applications. Enhanced with Anti-Vibration Technology (AVT®), it minimizes vibration to a mere 5m/s2, ensuring user comfort during extended use.
Makita HR4013C: This top-of-the-line rotary hammer boasts a potent 11 AMP motor capable of delivering 8.4 ft-lbs of impact energy, making it apt for heavy-duty applications. Enhanced with Anti-Vibration Technology (AVT®), it minimizes vibration to a mere 5m/s2, ensuring user comfort during extended use.
makitatools.com
LESS VIBRATION
1-9/16
”
AVT
®
Rotary Hammer,
accepts SDS-MAX bits
Model HR4013C
Lock-on or trigger activation in
“Chipping Only” mode with a push
button start/stop control
CONVENIENCE
Integrated damper spring at the base
of the impact bolt is engineered to
absorb impact vibrations
ERGONOMICS
Vibration absorbing housing moves
independently of the motor and
drive mechanism
PERFORMANCE
Air actuated counterbalance
actively reduces vibration
COMFORT
POWERFUL 11 AMP MOTOR DELIVERS 8.4 FT.LBS. OF IMPACT ENERGY
TO HANDLE THE MOST DEMANDING APPLICATIONS
• Anti-VibrationTechnology(AVT®)isasynchronized,three-componentsystem
thatmoreeffectivelyreducesvibrationresultinginalow5m/s2
• Airactuatedcounterbalancedirectsairpressurefromthecrankandbarrel
roomintothecounterbalancecylinderstomovecounterweightpistonsin
theoppositedirectionofthedrivepistonactivelyreducingvibration
• Vibrationabsorbinghousingfeaturesaspringloadedmainhandleand
upperhousingthatmoveindependentlyofthemotoranddrivemechanism
effectivelyisolatingmostofthevibrationawayfromtheuser
• Integrateddamperspringatthebaseoftheimpactboltisengineered
toabsorbimpactvibrationsfromthedrillbit
Makita U.S.A., 14930 Northam St., La Mirada, CA 90638
makitatools.com
1-9/16
”
AVT
®
Rotary Hammer, accepts SDS-MAX bits
Model HR4013C
FEATURES & BENEFITS
SPECIFICATIONS
Makita offers a wide variety of accessories. For a complete listing,
please refer to the Makita General Catalog or visit our website at
makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
The Makita Teal Color is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office
NTF-0713 MA-2420-13
n Powerful 11 AMP motor delivers 8.4 ft.lbs. of impact
energy to handle the most demanding applications
n Anti-Vibration Technology (AVT®) is a synchronized,
three-component system that more effectively
reduces vibration resulting in a low 5m/s2
n Air actuated counterbalance directs air pressure from the
crank and barrel room into the counterbalance cylinders
to move counterweight pistons in the opposite direction
of the drive piston actively reducing vibration
n Vibration absorbing housing features a spring loaded
main handle and upper housing that move independently
of the motor and drive mechanism effectively isolating
most of the vibration away from the user
n Integrated damper spring at the base of the impact bolt is
engineered to absorb impact vibrations from the drill bit
n Lock-on or trigger activation in “Chipping Only” mode
with a push button start/stop control for more convenient
operation
n Constant speed control automatically applies additional
power to the motor to maintain speed under load to
complete the most challenging jobs
n Soft start suppresses start-up reaction for more control
and better accuracy
n L.E.D. service light notifies the user approximately 8 hours
before the brushes need to be replaced
n L.E.D. power light indicates switch failure or cord damage
n Variable speed control dial enables user to match the
speed to the application for greater versatility
n Torque limiting clutch engineered to prevent gear
damage by automatically disengaging gears if the bit
binds
n Sequential impact timing delivers timed hammering
during rotation to minimize overlapping bit impacts for up
to 50% faster drilling
n Side Handle (196792-8)
n Depth Rod (331955-1)
n Side Grip Assembly (123138-5)
n Grease (For Bit) (194683-7)
n Cloth for wiping oil (443122-7)
n Tool Case
AMPS 11
Capacity (concrete) 1-9/16”
Impact Energy (Joules) 11.4 J
Blows Per Minute (variable speed) 1,450 - 2,900 BPM
Bit Type Accepts SDS-MAX
Overall Length 18-11/16”
Cord Length (ft) 16.4’
Net Weight 15.1 lbs.
Shipping Weight 21.99 lbs.
UPC Code 088381651325
STANDARD EQUIPMENT
Model HR4013C
-
1
-
2
Makita HR4013C: This top-of-the-line rotary hammer boasts a potent 11 AMP motor capable of delivering 8.4 ft-lbs of impact energy, making it apt for heavy-duty applications. Enhanced with Anti-Vibration Technology (AVT®), it minimizes vibration to a mere 5m/s2, ensuring user comfort during extended use.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Makita HR5212C Specification
-
-
-
-
-
-
Makita HR4013-19081937 User manual
-
-
-
Makita HM1317CB Specification
Other documents
-
Greenheck 469420 BR Series – Counterweight Adjustment Operating instructions
-
-
Hitachi DS18DVB2 User manual
-
Hitachi DH 40MRY Technical Data And Service Manual
-
-
-
Hitachi H 45MRY Technical Data And Service Manual