Kawai CA58 Owner's manual

Introduction

Playing the Piano

Music Menu

Recorder

Settings

Appendix

(ATX2/ATX2-f)

Owner’s Manual

Thank you for purchasing a KAWAI AnyTimeX2 piano!

The AnyTimeX2 piano is a revolutionary new instrument that combines the capabilities of an acoustic

piano and a digital piano. With the AnyTimeX2 piano, one can enjoy the pleasing, expressive tone of

KAWAI acoustic pianos, with the convenience of powerful, exciting features that can only be found on

a digital instrument.

As its name implies, the most compelling aspect of the AnyTimeX2 piano is that it can be played at

literally any time, without disturbing family or neighbours. It will allow you to enjoy the touch of a  ne

KAWAI acoustic piano while retaining the privacy and power of built-in digital sound. The AnyTimeX2

piano will o er many creative new possibilities for music-making in your home, school, or recording

studio.

To get the most from your AnyTimeX2 piano, please read this manual carefully and become familiar with

all its powerful functions and features. We trust that you and your AnyTimeX2 piano will be making

beautiful music together (at any time of the day or night) for many years to come.

IMPORTANT SAFETY INSTRUCTIONS

denotes that care should be taken.

The example instructs the user to take care not to allow fingers to be trapped.

denotes a prohibited operation.

The example instructs that disassembly of the product is prohibited.

denotes an operation that should be carried out.

The example instructs the user to remove the power cord plug from the AC outlet.

Examples of Picture Symbols

Read all the instructions before using the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING

TO REDUCE THE RISK OF

FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN

OR MOISTURE.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

SAVE THESE INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prongs are provided for your safety.

If the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms

or when unused for long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

The product is not completely disconnected from the

power supply even when the power switch is turned

off. If the product will not be used for a long time,

unplug the AC power cord from the AC outlet.

● Failure to do so may cause fire in case of

lightning.

● Failure to do so may over-heat the product,

resulting in fire.

This product may be equipped with a polarised line plug (one blade

wider than the other). This is a safety feature.

If you are unable to insert the plug into the outlet, contact an

electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the plug.

When disconnecting the AC power cord’s

plug, always hold the plug

and pull it to remove it.

● Pulling the AC power cord itself may damage

the cord, causing a fire, electric shock or

short-circuit.

Doing so may cause the product to fall over,

resulting in injury.

Do not lean against the keyboard.

When using the headphones, do not

listen for long periods of

time at high volume levels.

Doing so may result in hearing problems.

It is a good practice to place the instrument near the AC outlet and to place the power cord plug in a

position that allows the plug to be disconnected easily in the event of an emergency. Electricity is always

charging while the plug is in the AC outlet even when the power switch is in the ‘OFF’ position.

The chair must be used properly (it must be

used only when playing the product).

● Do not play with it or stand on it.

● Only one person is allowed to sit on it.

● Do not sit on it when opening the lid.

● Re-tighten the bolts occasionally.

Doing so may cause the chair to fall over or your

fingers to be trapped, resulting in injury.

WARNING

The product should be connected to

an AC outlet of the specified voltage.

● If you are going to use an AC power cord,

make sure that it has the correct plug shape

and conforms to the specified power voltage.

● Failure to do so may result in fire.

120V 240V230V

Indicates a potential hazard that could result in death

or serious injury if the product is handled incorrectly.

Do not insert or disconnect the power

cord plug with wet hands.

Doing so may cause electric shock.

WARNING - When using electric products, basic precautions should always be followed,

including the following.

● Do not use other AC adaptors to power this

instrument.

● Do not use the included AC adaptor or AC

power cord to power other equipment.

Use only the AC adaptor included with

this instrument to power the instrument.

Do not disassemble, repair or modify

the product.

Doing so may result in product breakdown, electric

shock or short-circuit.

● Doing so may cause the product to become

deformed or fall over, resulting in breakdown

or injury.

Do not stand on the product or exert

excessive force.

● Doing so may result in discoloration or deformation

of the product.

● When cleaning the product, put a soft cloth in

lukewarm water, squeeze it well, then wipe the

product.

Do not wipe the product with benzene

or thinner.

Failure to do so may damage them, resulting in

fire, electric shock or short-circuit.

When connecting the AC power cord

and other cords, take care

not to entangle them.

CAUTION

Indicates a potential hazard that could result in injury

or damage to the product or other property if the

product is handled incorrectly.

Using the product in such areas may result in

product breakdown.

Use the product only in moderate climates (not

in tropical climates).

Do not use the product in the following areas.

● Areas, such as those near windows, where the product is

exposed to direct sunlight

● Extremely hot areas, such as near a heater

● Extremely cold areas, such as outside

● Extremely humid areas

● Areas where a large amount of sand or dust is present

● Areas where the product is exposed to excessive

vibrations

Entry of water, needles or hair pins may result

in breakdown or short-circuit.

The product should not be exposed to dripping or

splashing. No objects filled with liquids, such as

vases, should be placed on the product.

Take care not to allow any foreign

matter to enter the product.

● Doing so may cause the product to generate

noise.

● If the product generates noise, move the

product sufficiently away from the electrical

appliance or connect it to another AC outlet.

Do not place the product near electrical

appliances such as TVs and

radios.

Closing it roughly may trap your fingers,

resulting in injury.

When closing the fallboard, close

it gently.

Failure to do so may cause breakdown of this

product and other devices.

Before connecting cords, make sure

that the power to this product

and other devices is turned

OFF.

OFF

Please lift up the product when moving it.

Please note that the product is heavy and must

be carried by more than two persons.

Dropping the product may result in breakdown.

Do not drag the product on the floor.

Take care not to drop the product.

Doing so may cause the illumination to fall over,

resulting in fire.

Do not place naked flame, such as lighted

candles on the product.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the

power cord plug, and then contact the shop from which the product was purchased.

CAUTION:

To prevent electric shock, match the wide blade of the plug with the wide socket slot and insert fully.

ATTENTION:

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu’au fond.

Instruction for AC power cord (U.K.)

Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a different electrical circuit from the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Radio Interference Regulations

This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio

Interference Regulations, C.R.C., c. 1374.

The product should be serviced by qualified service personnel when:

● The power supply cord or the plug has been damaged.

● Objects have fallen, or liquid has been spilled into the product.

● The product has been exposed to rain.

● The product does not appear to operate normally or exhibits a marked change in

performance.

● The product has been dropped, or the enclosure damaged.

The product should be located so that its location or position does not interfere with its proper

ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.

Failure to do so may over-heat the product,

resulting in fire.

Ensure that the ventilation is not

impeded by covering the ventilation

openings with items, such as newspaper,

table-cloths, curtains, etc.

8

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . 4

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Introduction

Owner’s Manual Conventions . . . . . . . . . . . . . . . . . . . . . . 10

Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Playing the Piano

Selecting Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Dual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Dual Mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Split Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Split Mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Four Hands Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Four Hands Mode settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Reverb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Reverb settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

E ects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Metronome / Drum Rhythms . . . . . . . . . . . . . . . . . . . . . . . 27

Metronome settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Panel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Music Menu

Demo Songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Piano Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Lesson Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

1. Selecting a lesson book/song. . . . . . . . . . . . . . . . . . . . . . 32

2. Listening to the selected lesson song . . . . . . . . . . . . . . 33

3. Lesson Function settings . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4. Repeating sections of a lesson song . . . . . . . . . . . . . . . 35

5. Recording a lesson song practice . . . . . . . . . . . . . . . . . . 36

6. Finger Exercises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Recorder

Song Recorder (Internal Memory) . . . . . . . . . . . . . . . . . . . . . . 38

1. Recording a song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

2. Playing a song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

3. Internal Recorder Edit menu . . . . . . . . . . . . . . . . . . . . . . . 41

4. Erasing a part/song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5. Converting a song to an audio  le . . . . . . . . . . . . . . . . . 43

Audio Record/Playback

(USB Memory) . . . . . . . . . . . . . . . . 44

1. Recording a MP3/WAV audio  le . . . . . . . . . . . . . . . . . . . 44

2. Playing an MP3/WAV audio  le . . . . . . . . . . . . . . . . . . . . 46

3. Playing a MIDI song  le . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

4. USB Recorder Edit menu . . . . . . . . . . . . . . . . . . . . . . . . . . 50

5.

Converting a MIDI song  le to an MP3/WAV audio  le

. . . 51

6. Overdubbing a MP3/WAV audio  le . . . . . . . . . . . . . . . . 52

Settings

Function menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

1. Key Transpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

2. Song Transpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

3. Tone Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

User Tone Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

4. Speaker Volume (AnyTimeX2-f only) . . . . . . . . . . . . . . . . . . 59

5. Phones Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

6. Line In Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

7. Line Out Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

8. Wall EQ (AnyTimeX2-f only) . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9. Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

10. Damper Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

11. Four Hands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

12. LCD Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

13. User Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

14. Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Virtual Technician Settings . . . . . . . . . . . . . . . . . . . . . . . . . 70

1. Touch Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

User Touch Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

2. Voicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

3. Damper Resonance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

4. Damper Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

5. String Resonance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

9

Settings (cont.)

6. Key-o E ect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

7. Fall-back Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

8. Hammer Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

9. Topboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

10. Decay Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

11. Minimum Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

12. Stretch Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

User Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

13. Temperament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

User Temperament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

14. Temperament Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

15. User Key Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

16. Half-Pedal Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

17. Soft Pedal Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

MIDI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

1. MIDI Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

2. Send Program Change Number . . . . . . . . . . . . . . . . . . . . 94

3. Local Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

4. Transmit Program Change Numbers . . . . . . . . . . . . . . . 96

5. Multi-timbral Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

6. Channel Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

USB Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

1. Load Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

2. Load User Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

3. Save Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

4. Save SMF Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

5. Save User Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

6. Rename File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

7. Delete File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

8. Format USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Power Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Auto Power O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Appendix

Connecting to Other Devices . . . . . . . . . . . . . . . . . . . . . . 109

Jack Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Demo Song List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Sound List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Program Change Number List . . . . . . . . . . . . . . . . . . . . . 115

Drum Rhythm List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Speci cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

MIDI Implementation Chart . . . . . . . . . . . . . . . . . . . . . . . 118

10

Introduction

This owner’s manual utilises a number of illustrative conventions in order to explain the AnyTimeX2 piano’s various

functions. The examples below provide an overview of the button LED indicator states and press types, and the

appearance of di erence kinds of text.



Button LED indicator states



Button press types



Text appearance

Owner’s Manual Conventions

LED indicator o :

Sound/Function is not selected.

LED indicator on:

Sound/Function is selected.

LED indicator  ashing:

Sound/Function is selected in a

temporary state.

Normal instruction and explanation text

is written in regular type at 9 pt. size.

* Notes about functions are marked with an

asterisk and written in 8 pt. size.

Reminders about previous operations are

written in italic type at 9 pt. size.

Press and hold:

Select a function’s settings etc.

hold

Captions explaining the LCD display

or button functions, are written in

bold type at 8.5 pt. size.

Example operations are written in italic type

at 8 pt. size, and enclosed within a grey box.

Normal press:

Select a sound or function.

11

Introduction

12

Introduction

Part Names and Functions



Please do not place any objects on top of the control panel.



Control box: panel open (above view)



Control box: MIDI, LINE IN/OUT connectors (rear view)



Pedals & Muting lever



Mu er lever



Control box: panel open

Upright piano

Grand piano



Control box: panel & headphone hook (front view)



DC IN connector

Upright piano Grand piano

Grand piano

Upright piano

ab

g

c

h

d

i

e

j

f

k

s

o

m

q

l

p

n

r

ON

OFF

Upright piano

w

u

y

t

x

v

13

Introduction

a POWER button

This switch is used to turn the instrument on/o . Be sure to turn o the

instrument after playing.

* The AnyTimeX2 piano features a power saving mode that can turn o the

instrument automatically after a speci ed period of inactivity. For more

information, please refer to the ‘Auto Power O ’ setting on page 108.

b VOLUME knob

This knob is used to adjust the volume when AnyTime mode is activated.

Turn the knob clockwise to increase the volume.

c PHONES jacks

These jacks are used to connect stereo headphones to the AnyTimeX2 piano.

Two pairs of headphones can be connected and used simultaneously.

d USB to DEVICE port

This port is used to connect a FAT or FAT32 formatted USB memory

device to the instrument in order to load/save recorded song data and

MP3/WAV/SMF  les etc.

e Headphone Hook

This hook is used to conveniently hang the headphones when not in use.

* The headphone hook is not pre-attached for grand pianos. Attach the

included headphone hook with the two screws provided, as shown in the

illustration on the previous page.

f LCD display

The LCD display provides useful information such as the currently

selected sound name, settings values, and the status of other functions

when active.

* A protective plastic  lm is attached to the display during production.

Please remove this  lm before attempting to play the instrument.

g FUNCTION button

These buttons are used to select one of three functions/options shown

at the bottom of the LCD display.

DUAL MENUSPLIT

h ARROW buttons

These buttons are used to navigate around the various menus and

screens, adjust values, and answer on-screen prompts.

i EFFECTS button

This button is used to turn e ects for the selected sound on/o , to

select the di erent e ect types, and to adjust their settings.

j REVERB button

This button is used to turn reverb for the selected sound on/o , to

select the di erent reverb types, and to adjust their settings.

k METRONOME button

This button is used to turn the metronome function on/o , and also to

adjust the tempo, time signature (or beat), and volume settings.

l PLAY/STOP button

This button is used to start/stop the playback of demonstration songs,

Piano Music pieces, and Lesson and Finger Exercises, and to start/stop

the recording and playback of recorder songs, and MP3/WAV audio  les.

m REC button

This button is used to record performances to internal memory or a USB

memory device as MP3/WAV audio  les.

n SOUND buttons

These buttons are used to select the sound(s) that will be heard when playing

the keyboard in AnyTime mode. Multiple sounds are assigned to each category

button, and can be selected by pressing the same button repeatedly.

o MUSIC button

This button is used to select AnyTimeX2 piano’s built-in Demonstration

songs, Piano Music pieces and Lesson songs.

p LINE IN jack

This jack is used to connect the stereo output from audio equipment,

computers, or other electronic instruments to the AnyTimeX2 piano.

q LINE OUT jack

This jack is used to connect the stereo output of the AnyTimeX2 piano to

external ampli ers, mixers, recording devices, and similar equipment.

r MIDI IN / OUT jacks

These jacks are used to connect the AnyTimeX2 piano to external MIDI

devices such as other musical instruments or a computer in order to

send and receive MIDI data.

* For more information about the instrument’s connectors and jacks, please

refer to ‘Connecting to Other Devices’ on page 109.

s DC IN Jack

This jack is used to connect the AC adaptor.

t Mute Pedal (upright piano)

This pedal is used to mute the acoustic piano sound. Depress this pedal

and slide it gently to the left to activate AnyTime mode.

Do not attempt to activate/deactivate AnyTime mode while playing the piano

as this can cause serious damage to the action mechanism of the instrument.

u Damper Pedal

This pedal is used to remove all dampers from the strings, allowing

them to vibrate freely. This greatly enriches the piano’s sound, while

also assisting the pianist to play smooth ‘legato’ passages.

v Soft Pedal / Sostenuto Pedal (upright piano)

This pedal is used to soften the sound, reducing its volume.

When ‘Jazz Organ’ or ‘Drawbar Organ’ sounds are selected, the soft

pedal is used to alternate the speed of the rotary speaker simulation

between ‘Slow’ and ‘Fast’ e ect modes.

With upright AnyTimeX2 instruments, it is also possible to use the Soft

pedal as a Sostenuto pedal by depressing the pedal while turning on

the AnyTimeX2 piano control panel.

w Sostenuto Pedal (grand piano)

This pedal is used to sustain one group of notes while other notes are

played without sustain.

x Muting Lever (grand piano)

This lever is used to mute the acoustic piano sound. Pull the lever gently to

the left to activate AnyTime mode. Do not attempt to activate/deactivate

AnyTime mode while playing the instrument as this can cause serious

damage to the action mechanism of the instrument.

y Mu er lever (upright piano)

This lever is used to activate/deactivate the mu er system of the

acoustic piano.

Pull the lever to activate and push it back to deactivate.

14

Introduction

Basic Operation

This section explains the basic procedures for turning the power on, activating AnyTime mode, and performing

with headphones.

1. Plug the AC adaptor into the DC IN connector

located at the rear of the instrument.

2. Plug the AC adaptor’s power plug into the

electric wall outlet.

3. Press the POWER button.

The LED above the POWER button will light up to indicate that

the AnyTimeX2 control box is turned on.

Press

* The AnyTimeX2 piano features a power saving mode that can turn o the

instrument automatically after a speci ed period of inactivity. For more

information, please refer to the ‘Auto Power O ’ setting on page 108.

4. Turn the VOLUME knob clockwise to the

half-way position.

5. [Upright piano] Depress the Mute pedal, then

slide it gently to the left to mute the acoustic

piano sound and activate AnyTime mode.

Pedals

(Mute)(Soft) (Damper)

[Grand piano] Pull the Muting lever to the

left to mute the acoustic piano sound and

activate AnyTime mode.

Do not attempt to activate/deactivate AnyTime mode while playing the piano,

as this can cause serious damage to the action mechanism of the instrument.

6.

Connect a pair of headphones to one of the PHONES jacks located on the front of the control box.

Two pairs of headphones can be connected simultaneously,

allowing two people to listen to the AnyTimeX2 piano at the

same time.

15

Introduction

Play the piano.

The sound of a Concert Grand piano will be played through the

headphones, with the acoustic piano sound muted.



About the soundboard speaker (ATX2-f)

ATX2-f upright and grand pianos feature a uniqe integrated soundboard speaker system, allowing the AnyTimeX2 sound to be

played without the use of headphones.

In addition, when AnyTime mode is deactivated (i.e. the acoustic piano sound is not muted), it is also possible to enjoy playing

ensemble pieces that feature both the acoustic piano sound and AnyTimeX2 sound simultaneously, such as piano with strings.

16

Playing the Piano

The AnyTimeX2 piano features a wide selection of realistic instrument sounds suitable for various musical styles.

Sounds are arranged into eight categories, with several sounds assigned to each category button. For a complete

listing of available instrument sounds, please refer to page 114 of this owner’s manual.

By default, the ‘Concert Grand’ sound will be selected automatically when the instrument is turned on.



Selecting a sound

Press the desired SOUND button.

The LED indicator for the button will turn on to indicate that this

category has been selected, and the name of the sound will be

shown in the LCD display.



Changing the sound

Several sounds are assigned to each category button.

Press the selected category button repeatedly to cycle through

the di erent sound variations.

The  or  buttons can also be used to select sounds and cycle

through the di erent sound variations.

Selecting Sounds

LED indicator on:

Sound category is

selected.

Example: To select the OTHERS category, press

the OTHERS button.

17

Playing the Piano

Dual Mode

The Dual Mode function allows two sounds to be layered together, creating a more complex sound.

For example, a piano sound layered with strings, or a church organ combined with a choir, etc.

1. Entering Dual mode

Press the FUNCTION button (DUAL).

The DUAL Mode screen will be shown in the LCD display.

The currently selected sound is shown on the  rst line. Slow

Strings is selected as layered sound and shown on the second

line.

Layered

sound

Main

sound

2. Changing the main/layered sounds

Press the  or



buttons to move the selection cursor over the

main sound or layered sound.

Press the  or  buttons to cycle through the di erent sound

variations.

 buttons:

Move selection cursor.

 buttons:

Change sound variation.

18

Playing the Piano

Dual Mode

Dual Mode settings

The Dual Mode settings menu allows characteristics of the combined sound to be adjusted.



Dual Mode settings

Dual Mode setting Description Default setting

Balance Adjust the volume balance between the main and layered sounds. 5 : 5

Layer Octave Shift Raise/lower the pitch of the layered sound in octave steps. 0

Dynamics Adjust the dynamic sensitivity of the layered sound relative to the main sound. 10



Entering the Dual Mode settings menu

While the Dual Mode screen is shown in the LCD display:

Press the

FUNCTION button (EDIT).

The Dual Mode settings menu will be shown in the LCD display.



Adjusting Dual Mode settings

After entering the Dual Mode settings menu:

Press the  or



buttons to move the selection cursor over the

desired setting.

Press the  or  buttons to adjust the selected setting.

* To reset the current setting to the default value, press the

FUNCTION button (RESET).

3. Exiting Dual mode

Press the FUNCTION button (EXIT) to exit Dual Mode.

 buttons:

Move selection cursor.

 buttons:

Adjust selected setting.

19

Playing the Piano

Split Mode

The Split Mode function divides the keyboard into two sections, allowing each section to be played with a di erent

sound. For example, a bass sound in the lower section, and a piano sound in the upper section.

1. Entering Split mode

Press the FUNCTION button (SPLIT).

The Split Mode screen will be shown in the LCD display.

* The default split point is set between keys B3 and C4.

The upper section and lower section sound names will be

shown in the LCD display. The LED indicator for the upper

section sound button will turn on, and the LED indicator for the

lower section sound button will start to  ash.

Lower

section

sound

Upper

section

sound

* By default, the lower section will be set to the ‘Wood Bass’ sound.

2a. Changing the upper/lower section sounds: Method 1

Press the  or



buttons to move the selection cursor over the

upper section or lower section sound.

Press the  or  buttons to cycle through the di erent sound

variations.

2b. Changing the upper/lower section sounds: Method 2

It is also possible to change the upper/lower section sound by pressing the PIANO or OTHERS buttons.

To select a di erent sound for the upper section:

Press the PIANO or OTHERS buttons repeatedly.

or

To select a di erent sound for the lower section:

Press and hold the

FUNCTION button, then press the PIANO

or OTHERS buttons repeatedly.

or

hold

 buttons:

Move selection cursor.

 buttons:

Change sound variation.

LED indicator  ashing:

Lower section sound.

LED indicator on:

Upper section sound.

20

Playing the Piano

Split Mode

3. Changing the split point

Press and hold the FUNCTION button, then press the desired

split key on the keyboard.

The name of the pressed key will brie y be shown in the LCD

display, and will become the new split point.

hold

Upper sectionLower section

New split point

Split Mode settings

The Split Mode settings menu allows characteristics of the Split Mode sound and operation to be adjusted.



Split Mode settings

Split Mode setting Description Default setting

Balance Adjust the volume balance between the upper and lower sections. 5 - 5

Lower Octave Shift Raise/lower the pitch of the lower section sound in octave steps. 0

Lower Pedal Enable/disable the sustain pedal for the lower section sound. O



Entering the Split Mode settings menu

While the Split Mode screen is shown in the LCD display:

Press the

FUNCTION button (EDIT).

The Split Mode settings menu will be shown in the LCD display.



Adjusting Split Mode settings

After entering the Split Mode settings menu:

Press the  or



buttons to move the selection cursor over the

desired setting.

Press the  or  buttons to adjust the selected setting.

* To reset the current setting to the default value, press the

FUNCTION button (RESET).

 buttons:

Move selection cursor.

 buttons:

Adjust selected setting.

Page is loading ...

Kawai CA58 Owner's manual

Kawai CA58 Owner's manual

Related papers

Other documents