HOUSEHOLD USE ONLY
INSTRUCTION MANUAL
SC-CX910
VACUUM CLEANER
Hose Stopper /
Insert the hose stopper all the
way up to the air inlet.
To detach it, press button on
the hose stopper and pull the
hose toward you.
NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) /
Air inlet
Button
Cord Rewind Button /
To pull the cord back into the unit, press the cord rewind button.
Caution:
Hold the plug when rewinding the
cord so that the plug does not
damage furniture, hands, the vacuum
cleaner or the cord by hitting them.
Holding the plug will make rewinding
smoother.
Cord rewind button
Switch
/
Start or stop vacuum cleaner by pushing on the switch.
Cord and Plug /
Pull out the cord and
connect the wall outlet.
Do not extend the cord from the unit beyond the red
marker line.
Insert securely by turning
Dust Compartment
Power Control /
Set the POWER CONTROL to
+ / MAX for maximum
suction.
In the position - / MIN the
suction power is decreased.
+ / MAX
- / MIN
Attachments /
For vacuuming edges and gaps.
Crevice tool /
The head of the brush
can rotate for vacuuming fragile or easily scratched items.
Round brush /
Pull
Extension Pipe/
The pipe is adjustable according to the height of the user.
(How to expand / contract the pipe)
Adjust the length of the pipe while pushing the slider.
Make sure that you hear a click sound.
<>
Caution
Please do not place your hand on the
expansion pipe slider during operation.
Please do push the slider in when
adjusting the length.
Slider
Slider
Pipe holder
Put the round
brush here
when not in use.
MAX
MIN
+
-
Clamp button
The two-way floor nozzle has lever with
two positions.
FLOOR:
For vacuuming wooden floors,
linoleum or plastic covered
floors.
RUG:
For vacuuming rugs and
carpets.
Floor Nozzle /
T
FLOOR
RUG
FLOOR
RUG
Hose
Connect the angled pipe
The full vacuum power of the cleaner may be too strong in certain cases, for
instance when vacuuming curtains and draperies. In these cases, turn the
vacuum power adjustment ring (on the hose) to control the vacuum power.
Match the hole in the ring with the hose hole to reduce the power.
Vacuum Power Adjustment Ring /
Vacuum power
adjustment ring
Angled pipe
DUST DISPOSAL /
Turn the vacuum cleaner off, pull
the hose out of the unit and empty
out the dirt as follows:
1.
MAX
3.
2.
1. Press the clamp button
and take out the dust
compartment.
Empty the dust
compartment when
contents reach the
MAX mark.
2. In figure, push the
slider, open the dust
cover and empty the
dust compartment.
Use the garbage bags
to cover the dust cup
to prevent dust splash
when you empty the
compartment.
3. Clean the dust
compartment then
reattach the vacuum
cleaner.
Dust compartment
Clamp button
Dust compartment cover
MAX
MA
X
Slider
CLEAR THE DUST COMPARTMENT /
2.
3.
1.
Main filter
Pre-Filter
Remove the dust compartment
and empty dust compartment
as follows.
1. As the arrow shown, turn the
duster knod several times and
waste in dust compartment
will drop out.
2. In figure, push the duster
holder and take the pre-filter
and main filer.
3. Clean the pre-filter and main
filter with water.
Allow each parts to dry
completely after cleaning.
Do not attempt to dry with a
hair dryer or by placing in a
clothes dryer. Hot air may
cause the filters to warp.
Don't need to wash after
use each time.
Caution:
Pre-Filter
Duster holder
Duster Knod
4.
4. Insert the main filter into
the pre-filter as shown.
5. Align the ribs of the main filter
to match the shape of the
hole in the dust compartment
and press firmly to insert.
Hole
Ribs
5.
13.This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
1. Operating without the dust compartment in place will allow dust to enter
could damage the vacuum cleaner. the motor and
2. Keep the vacuum cleaner away from stoves and other heat sources.
Heat can deform and discolor the plastic parts of the unit.
3. Keep the vacuum cleaner free of insecticides. Do not wipe with benzene,
thinner, petrol or other oils which might cause discoloration or cracking.
To clean the body and hose, dampen a cloth with a mild detergent and
wipe clean.
4. Blocking the suction inlet or allowing the dust to clog the hose will
decrease the efficiency of the motor.
5. Be sure not to push the clamp button while carrying the vacuum cleaner.
6. Never try to vacuum the following objects. They may damage the unit or
cause a fire.
* Wet things, mud, soil, and fluids
* Burning cigarettes
* Needles and razor blades
* Inflammable materials such as gasoline and thinner
*
Construction waste.
9. Pull out the plug from the power source after use. Grasp the plug-not
the cord-when pulling out the plug.
Pulling on the cord may lead to short circuiting.
10. Long and continuous use causes the exhaust air and the body of the
vacuum cleaner to become warm. This, however, does not denote
malfunction.
11.When vacuuming places that are very dusty, and also when vacuuming
regularly, empty the dust compartment before it becomes completely
filled.
Frequent emptying lengthens the life of the motor and maintains strong
suction power.
12.If the supply cord of this appliance is damaged, it must only be replaced
by a repair shop appointed by the manufacturer, in order to avoid a
hazard.
14.Young children should be supervised to ensure that they do not play with the
appliance.
A FEW PRECAUTIONS
8. Please do not hold the hose to lift the vacuum cleaner and sway or move it,
otherwise, it will be caused the damage for human body or vacuum cleaner.
1. Open the filter cover.
2. Remove the HEPA Filter.
3. Insert a new HEPA Filter,
close the filter cover.
1.
2. HEPA
3. HEPA
Caution:
Be sure the HEPA Filter is
facing the right direction.
HEPA Filter
HEPA
Under normal usage, the HEPA Filter will require replacement once every one year;
however, vacuuming large amounts of extremely fine dust, powder or similar material
over a long period of time may decrease airflow performance through the filter. If this
occurs, it may become necessary to replace the HEPA Filter more often. Only use
genuine Sanyo replacement filters.
REPLACING THE HEPA FILTER /
HEPA
Filter cover
Groove
Jut
Please take the filter cover
jut insert into the groove,
then press the filter cover.
To assure the best results, we recommend cleaning the filters once every
one (1) year, depending on usage.
Filter
Filter
Take out the filter and
cleaned by water.
Caution:
Never insert the filter into
the vacuum cleaner unless
it is completely dry.
CLEANER OF FILTER /
Please do not use the vacuum cleaner without properly fixing the filter, otherwise, it may
cause the motor to smoke, even burn into fire since the filter is part of functional components.
CAUTION /
HOW TO USE THE HOSE STAND /
The vacuum cleaner with
the floor nozzle, wands and
hose can be stored while
still connected.
Insert the wand holder
into the wand-
holder hole.
Caution:
Do not carry the vacuum cleaner
while it is in the storage position.
(Injury or damage may result if
the hose or extonsion pipe
becomes unattached.)
9BF-D-P111-09604 1005-
E/CHN
0
CARE AND MAINTENANCE
If you have a problem with your vacuum cleaner, consult the handy guide below. If the
vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo
Service Center.
Wand holder
Wand-holder hole
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Fantom Vacuum FC285H User manual
-
-
-
-
-
-
-
Shark S1215C User manual
-
-
Panasonic MC-CL310 User manual