Sanyo SC-CX500 User manual

Brand: Sanyo

Model: SC-CX500

Type: User manual

HOUSEHOLD USE ONLY

INSTRUCTION MANUAL

SC-CX500

VACUUM CLEANER

Hose Stopper /

Insert the hose stopper all the

way up to the air inlet.

To detach it, press button on

the hose stopper and pull the

hose toward you.

NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) /

Air inlet

Button

Cord Rewind Button /

To pull the cord back into the unit, press the cord rewind button.

Caution:

Hold the plug when rewinding the cord so that

the plug does not damage furniture, hands, the

vacuum cleaner or the cord by hitting them.

Holding the plug will make rewinding smoother.

Cord rewind button

Power Control /

Set the POWER CONTROL to MAX for maximum

suction. In the position MIN the

suction power is decreasED.

MAX

MIN

Extension Pipe/

The pipe is adjustable according to the height of the user.

(How to expand / contract the pipe)

Adjust the length of the pipe while pushing the slider.

Make sure that you hear a clicking sound.

Caution

Please do not place your hand on the

expansion pipe slider during operation.

Please do push the slider in when

adjusting the length.

The full vacuum power of the cleaner may be too

strong in certain cases, for instance when vacuuming

curtains and draperies. In these cases, push the

vacuum power adjustment slider to control the

vacuum power.

As the hole becomes larger, the vacuum

power will be weaker.

Vacuum Power Adjustment slider /

Vacuum power

adjustment slider

Switch

Start or stop vacuum cleaner by pushing on the switch.

Cord and Plug /

Pull out the cord and

connect the wall outlet.

Do not extend the cord from the unit beyond the red

marker line.

Hose

Insert securely by turning

Dust Compartment

MAX MIN

Put the attachments

here when not in use.

For vacuuming wooden floors, linoleum or plastic

covered floors.

The two-way floor nozzle has lever with two positions.

For vacuuming rugs and carpets.

Floor Nozzle /

FLOOR:

CARPET

FLOOR:

CARPET

Attachments /

The head of the brush can rotate.

For vacuuming edges and gaps,and for

vacuuming fragile or easily scratched items.

Dusting brush / 2 1

Upholstery tool /

May be used for upholstered furniture, tapestries, mattresses, clothing,

automobile interiors and carpeted stairs, etc.

Slider

Pull

Slider

DUST DISPOSAL /

Turn the vacuum cleaner off, pull

the hose out of the unit and empty

out the dirt as follows:

MAX

Release button

1. Please press clamp

button to tahe out the

dust compartment.

Empty the dust

compartment when

contents reach the

MAX mark.

2. Press the release button

to empty the dust

compartment.

Use the garbage bags

to cover, the dust cup

to prevent dust splash

when you empty the

compartment.

3. Cleaning the dust

compartment then

reattaching the vacuum

cleaner.

Clamp button

Dust compartment

Filter

Take out the filter and

cleaned by water.

Caution:

Never insert the filter into

the vacuum cleaner unless

it is completely dry.

To assure the best results, we recommend cleaning the filters once every

one (1) year, depending on usage.

Filter

CARE OF FILTER /

CLEAR THE DUST COMPARTMENT /

Main filter

Pre-Filter

Dust cup

Stopper

Remove the dust compartment

and empty dust compartment

as follows.

1. Empty out the dirt, turn the

dust cup in the direction

shown to remove the

dust cup.

2. Remove the prefilter

according to the top of

prefilter arrow.

3. Turn the main filter and

remove the main filter,

as shown in the figure.

4. Clean the each parts with

water.

Allow each parts to dry

completely for 24 hours

after cleaning.

5. Pettaching the dust

compartment, as

shown in the figure.

And rettach to the

vacuum cleaner.

Stopper Stopper

Do not attempt to dry with a

hair dryer or by placing in a

clothes dryer. Hot air may

cause the filters to warp.

Don't need to wash after

use each time.

Caution:

13.This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Thank you for your purchase of the Sanyo Vacuum Cleaner.

Please read these instructions carefully before using.

A FEW PRECAUTIONS

1. Operating without the filter in place will allow dust to enter the motor and

could damage the vacuum cleaner.

2. Keep the vacuum cleaner away from stoves and other heat sources.

Heat can deform and discolor the plastic parts of the unit.

3. Keep the vacuum cleaner free of insecticides. Do not wipe with benzine,

thinner, petrol or other oils which might cause discoloration or cracking.

To clean the body and hose, dampen a cloth with a mild detergent and

wipe clean.

4. Blocking the suction inle to r allowing the dust to clog the hose will

decrease the efficiency of the motor.

5. Be sure not to push the clamp button while carrying the vacuum cleaner.

6. Never try to vacuum the following objects. They may damage the unit or

cause a fire.

* Wet things, mud, soil, and fluids

* Burning cigarettes

* Needles and razor blades

* Inflammable materials such as gasoline and thinner

9. Pull out the plug from the power source after use. Grasp the plug-not

the cord-when pulling out the plug.

Pulling on the cord may lead to short circuiting.

10. Long and continuous use causes the exhaust air and the body of the

vacuum cleaner to become warm. This, however, does not denote

malfunction.

11.When vacuuming places that are very dusty, and also when vacuuming

regularly, empty the dust compartment before it becomes completely

filled.

Frequent emptying lengthens the life of the motor and maintains strong

suction power.

12.If the supply cord of this appliance is damaged, it must only be replaced

by a repair shop appointed by the manufacturer, in order to avoid a

hazard.

14.Young children should be supervised to ensure that they do not play with the

appliance.

8. Please do not hold the hose to lift the vacuum cleaner and sway or move it,

otherwise, it will be caused the damage for human body or vacuum cleaner.

1. Open the filter cover.

2. Remove the HEPA Filter.

3. Insert a new HEPA Filter,

close the dust

compartment cover.

2. HEPA

3. HEPA

Caution:

Be sure the HEPA Filter is

facing the right direction.

Filter cover

HEPA Filter

HEPA

Under normal usage, the HEPA Filter will require replacement once every one year; however,

vacuuming large amounts of extremely fine dust, powder or similar material over a long period of

time may decrease airflow performance through the filter. If this occurs, it may become necessary

to replace the HEPA Filter more often. Only use genuine Sanyo replacement filters.

REPLACING THE HEPA FILTER /

HEPA

HOW TO USE THE HOSE STAND /

The vacuum cleaner with

the floor nozzle, wands and

hose can be stored while

still connected.

Hold the hose and wind it

around the wands.

Caution

Do not carry the vacuum

cleaner while it is in the

storage position.

(Injury or damage may result

if the hose or coupling pipe

becomes unattached.)

Stand the vacuum cleaner

up and insert the wand

holder into the wand

holder hole.

Wand holder

Wand-holder hole

CARE AND MAINTENANCE

If you have a problem with your vacuum cleaner, consult the handy guide below. If the

vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo

Service Center.

9BF-D-P111-09200 0907-

E/CHN

Sanyo SC-CX500 User manual

Sanyo SC-CX500 User manual

Sanyo SC-CX500 User manual

Related papers

Other documents