2. Computers & electronics
  3. Print & Scan
  4. Laser/LED printers
  5. Brother
  6. HL-L9200CDWT
HL-L9200CDWT

Brother HL-L9200CDWT, HL-L9300CDW(T) Quick setup guide

  • Hello! I am an AI chatbot trained to assist you with the Brother HL-L9200CDWT Quick setup guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What components are included with the machine?
    Can I use any USB cable to connect the machine to my computer?
    What type of network cable do I need to connect the machine to a wired network?
    Can I connect the machine to a wireless network?
    How can I download the full driver and software package for Windows if I don't have a CD-ROM drive?
1
2
3
4
1
2
3
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord Quick Setup Guide
Product Safety GuideCD-ROMBelt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug •
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
HL-L9200CDW.
You must purchase the correct interface cable for the interface you •
want to use:
USB cable
We recommend using a USB2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1
Remove the packing material from the machine
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
Press
1.
> General Setup > Local Language.
Press your language.
2.
On the machine’s Touchpanel, press
3.
.
4
Select your language
Adjust the paper guides.
Quick Setup Guide
HL-L9200CDW / HL-L9200CDWT
HL-L9300CDW / HL-L9300CDWT / HL-L9300CDWTT
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version A
ENG
Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows
®
)
Conguration without using the CD-ROM (Windows
®
without CD-ROM drive or Macintosh)
5
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows
®
) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2.
solutions.brother.com/ips
Print using your mobile device
Select the specied SSID,
and then enter the Network key.
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection
Press .
Press Setup Wizard. Press Yes for Wireless Network.
/