2. Brother
  3. HL-L9200CDW
HL-L9200CDW

Brother HL-L9200CDW User guide

  • Hello! I've reviewed the Quick Setup Guide for the Brother HL-L9200CDW and HL-L9200CDWT printers. This guide details the initial setup process, including unpacking, component checks, and connecting the device. It includes instructions for both USB and network connectivity, as well as setting up mobile printing. I'm ready to answer your questions based on the contents of this document.
  • What components are included in the box?
    What type of USB cable should I use?
    How to connect to a network?
    How can I print from my mobile device?
1
2
3
4
1
2
3
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord Quick Setup Guide
Product Safety GuideCD-ROMBelt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug •
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
HL-L9200CDW.
You must purchase the correct interface cable for the interface you •
want to use:
USB cable
We recommend using a USB2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1Remove the packing material from the machine
2Load paper in the paper tray
3Connect the power cord and turn on the machine
Press
1. > General Setup > Local Language.
Press your language.
2.
On the machine’s Touchpanel, press
3. .
4Select your language
Adjust the paper guides.
Quick Setup Guide
HL-L9200CDW / HL-L9200CDWT
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version 0
ENG
https://manual-hub.com/
Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows®)
Conguration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh)
5
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2. solutions.brother.com/ips
Print using your mobile device
Select the specied SSID,
and then enter the Network key.
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection
Press . Press Setup Wizard. Press Yes for Wireless Network.
https://manual-hub.com/
/