PB2711RD
MICRO SYSTEM
AM/FM/CD/MP3/USB/CASSETTE/AUX-IN
INSTRUCTION MANUAL
Fo
r C
us
t
omer Us
e
E
n
te
r b
elo
w th
e S
e
ri
al N
o
. whi
ch is located
O
n t
h
e b
ot
to
m of the ca
bin
e
t. R
eta
in t
h
i
s
In
fo
r
mati
on fo
r f
u
t
u
re r
e
f
e
ren
c
e
.
Mo
d
e N
o.
Se
ri
al N
o
.
EN-2
EN-3
EN-4
1.POWER BUTTON
2.SEARCH BACK
3.VOLUME BUTTON
4.STOP/BAND BUTTON
5.STANDBY INDICATOR
6.CD DOOR OPEN/CLOSE BUTTON
7.PRE-DN/PRE-UP BUTTON
8.FUNCTION SELECT
9.FM ANTENNA
10.USB JACK
11.SEARCH NEXT
12.CASSETTE RECORDERS KEYS
13.CASSETTE DOOR
14.LCD DISPLAY
15.PLAY/PAUSE BUTTON
16.REPEAT/MO/ST BUTTON
17.TIME/PROGRAM BUTTON
18.AUX JACK
19.STEREO HEADPHONE JACK
20.BATTERY DOOR
21.AC SOCKET
4.STOP/BAND BUTTON
-Stop CD/MP3/USB playback; erase a CD program.
- In the radio mode, press this button to
select the FM STERED, FM, AM.
5.STANDBY INDICATOR
6.CD DOOR OPEN/CLOSE BUTTON
7.PRE-DN/PRE-UP BUTTON
19.STEREO HEADPHONE JACK
20.BATTERY DOOR
12.CASSETTE RECORDERS KEYS
14.LCD DISPLAY
13.CASSETTE DOOR
15.PLAY/PAUSE BUTTON
16.REPEAT/MO/ST BUTTON
17.TIME/PROGRAM BUTTON
18.AUX JACK
21.AC SOCKET
- Press MO/ST button once , to mono state.
- Press MO/ST button twice , to stereo state,
stereo is displayed(In FM mode).
EN-5
EN-6
to setup the time of the unit
1.connect the ac on( .
2.short according to the time button, the time will flashing on the lcd display.
3. BACK、NEXT to select the number of the time. you can setup the time format by
12h or 24h.
4.press time button to confirm.
5.then you can set the hour and the minute with the same method of steps 3-4.
6.
with the same method of steps 3-4.
The following operation must be in standby mode)
after setup the unit time, long press the time button can setup the unit begin working time ,
Note: after setup the beginning time, the lcd will display the radio/cd/usb/aux mode,
the BACK or NEXT to choose the mode, then it press time button to affirm, otherwise it play
usb or aux mode first.
Rotate
Rotate
Radio reception
1.Press FUNCTION button select RADIO mode.
2. Press BAND to select the desired wave band: FM STERED,AM, FM
3.Tune to required station by rotate BACK or NEXT.
Manual Tuning: Rotate BACK or NEXT and then release within 1 sec.
Auto Tuning: Press the play/pause button enter the automatic channel
scan mode, and to be put automatically sets.
Preset Channel:(FM 30 Preset memories,AM 10 preset memories)
(1) Rotate BACK or NEXT Select desired station.
(2) Press PROGRAM button once , the MEMORY number indicator begins steady in the display.
(3) Push PRESET- DOWN or PRESET-UP buttons to select the desired number.
(4) Press PROGRAM button to save that station.
(5) Repeat steps (1) to (4) procedures for other stations.
4.After end of program. Push PRE-UP or PRE-DN to start play the frequency that you selected or
press number key on the remote control.
5.Push [VOL-]or [VOL +] to adjust the volume.
6.Extend TELESCOPIC ANTENNA to its full length if you are listening to FM broadcasting.
7.Turn off the radio by press FUNCTION button select other mode or press power button to off
the unit.
8.Switch on again after shut down,the memory frequency still exists.
MONO/ STEREO
- Press MO/ST button once , to mono state.
- Press MO/ST button twice, to stereo state, stereo is displayed.
USE RADIO
USE CLOCK
PROGRAM METHOD
(1)Press the [PROGRAM] key at STOP mode, system will go to PROGRAM mode.
-The PRG icon and P01 will blink at 2Hz. This prompts the user to enter the first songs in the
program PLAY list.
(2)The user can select the desire tracks by using [NEXT], [BACK] keys.
Once these keys are pressed, the Display will show the selected track.
(3)After select the desired track, press [PROGRAM] key again and it will be stored in the memory.
Mp3 Maximum 99 and CD Maximum 20 tracks can be programmed when Repeat
steps (2) to (3) procedures.
(4)If press the [STOP] key during the program mode, then the selected TRACKS will be stored
in the memory and return to STOP mode (Continuous Play mode)
(5)If press the [PLAY] key during the program mode, it will start the program PLAY mode.
PLAY start from P01 Track
Erasing a program
You can erase the content of the memory by:
- While playing, press STOP button twice.
- Opening the CD door
- Select the other mode.
UNDERSTANDING THE BUTTONS
RECORD - Press to record from the radio or CD play.
PLAY - Press to play cassettes.
REW - From stop mode, press to rewind the tape toward the beginning.
F.FWD - From stop mode, press to advance the tape toward the end.
STOP/EJ. - Press to stop current tape activity or to open the cassette compartment door
when no buttons are active.
PAUSE - Press to interrupt tape play or record mode, press the second time to resume tape
play or tape record mode.
PLAY A CASSETTE TAPE
1.Press FUNC button select TAPE mode.
2.Press STOP/EJ.key to open the cassette compartment door.
3.Insert a recorded cassette and close the cassette compartment door.
4.Press PLAY to start playback.
5.To interrupt playback, press PAUSE ,To resume, press the key again.
6.Press REW/F.FWD to move tape to the desired starting point.
7.Adjust the volume to your desired listening level.
8.To stop the tape ,press STOP/EJ.
- The keys are automatically released at the end of the tape, except if PAUSE has been
activated.
USING THE CASSETTE
、 、 .
To listen music with a mp3 discman walkman
1.Connect to the AUX .
2.press function selector to AUX, the sound source of the mp3
or discman or walkman will output from the unit.
-Press the volume control to adjust the volume.
-The unit can't control the player.
USE AUX
USING THE CASSETTE
EN-7
EN-8
Note: at the mode of CD/MP3 / USB ,the lcd will
display the number of song or the song playing time.
if at the mode of aux, the lcd will only display the
symbol of aux.
-The unit don't support the HDD all and the
portion usb with mp3 player.
USB Audio functions
1)press function button or stop usb button to
choose the usb state.
2) PLAY/PAUSE
3) NEXT, BACK Skip search
4) Program Track(MP3 99 Track CD 20 Track )
5) mode : normal->repeat 1->repeat all->
->normal
6) Maximum Folder : 99 Folders
7) Maximum File : 999 Files
*Notice :
-When the unit has not the disc,inserting the
usb card will automatically real usb card,
it read the USB first while having the USB.
Repeat
repeat album
This CD-player can play Audio Discs,MP3 CD-R.
Do not try to play CD-ROM,CDi,VCD,DVD or
computer CD.
1.
、with the printed side
facing up and press cd door gently to close.
4.press play/pause on the set to start playback.
5.
note: cd/mp3 play will also stop when:
-you open the cd compartment;
-you select radio sound source;
-the cd/mp3 has reached to the end.
selecting a different track.
during playback you can use back or next to
select a particular track.
if you have selected a track number in the
stop or pause position, press play to start
playback.
next once briefly for the next track,
or press repeatedly until the desired track
number appears in the display.
back once briefly to return to the
beginning of a current track.
back more than once briefly for a
previous track.
finding a passage within a track
1. and hold down back or next.
the cd is played at high speed.
2.when you recognize the passage you want
release back or next.
normal playback resumes.
different play modes:repeat
repeat-play the current track continuously.
Press function button to CD state.
2.to open the cd door, press cd open button.
3.insert a mp3/cd or cd-r
Press the pause button to pause play, press
the play button back playing.
6.to stop cd playback , press stop.
Press
Press
Press
Press
CD/MP3 PLAYER
CD/MP3 Player
Playing a CD/MP3
Playing a USBPlaying a USB
EN-9
EN-10
CD/MP3/USB playback does not work
CD/MP3 badly scratched/dirty/USB
Replace/clean CD/MP3
(see maintenance)
/USB
The CD/MP3 skips tracks
CD/MP3 damaged or dirty
Replace or clean CD/MP3
- CD-R is blank or the disc is
not finalized
Use a finalized CD-R.
Insert a CD,MP3, CD-R.
No CD/MP3 inserted
TECHNICAL SPECIFICATIONS
GENERAL
Power Requirement ............................................................AC:110V
Power consumption .............................................................AC 16 Watts
Dimensions......................................................Approx.268 mm(L)x 273 mm(W) x156 mm(H)
Operation temperature.........................................................+5 ℃ - +35℃
RECEIVER SECTION
Receiving Bands....................................................................AM/FM
Tuning Range.........................................................AM:530~1710KHz
FM:87.5~108MHz
COMPACT DISC SECTION
Optical Pickup...................................................................... .3-Beam Laser
Frequency Response.............................................................100Hz - 16KH z
AUDIO SECTION
Power output .........................................................................Maximum 1.8 Watt x 2
Headphone Impedance ............................................................4 ~ 32 Ohms
ACCESSORIES
Instruction Booklet.....................................................................1
Ac line cord.....................................................................1
LIMITED WARRANTY
Axess provides a Limited Warranty of One year for parts and ninety (90) day labor warranty for all of its products sold
in the United States. This warranty only applies within the United States.
Limited Warranty Statement
Axess Products, Corp. ("Axess ") warrants this product to the original purchaser ONLY, to be free from defects in
materials and workmanship under normal use, for One year Parts and Ninety Days for labor from the date of original
purchase. Axess agrees, at its option under the warranty period, to repair or replace the product if it is determined to
be defective at "No Charge". The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, head
bands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, Damage
caused by leaking batteries, misuse, mishandling, improper application, accident, acts of God, or attempted repair by
an unauthorized service agent.
Products are sold to customer for personal, non-commercial use only. Product is not warranted for customer's
commercial or rental use.
In order to have your merchandise repaired or replaced by warranty, you must return the product FREIGHT
PREPAID to the address below within the duration of the warranty. With the return of the product, you MUST
INCLUDE:
The Product must be sent in the original packaging or reasonable substitute to prevent damage. You Must include
your full name shipping address and telephone number for our reference. No return will be shipped back to a PO
BOX. If returned merchandise is found to have no problem, it will be returned back to the purchaser. Send all
inquiries or returns to:
Axess Products, Corp.
RMA Department 9409 Owensmouth Ave.
Chatsworth, CA 91311
888-232-4145
1. Proof of purchase, which must have a purchase date that falls in the warranty period specified in the
warranty card.
2. All of the accessories that came with the product package must be sent along with the main unit.
3. A detailed description of the problem you are having with the product. For return shipping and handling, in
the amount specified above.
4. RMA All warranty returns must have an RMA number provided by an Axess Customer Support
Representative. An RMA number can be obtained by contacting Axess's Customer Support Department by
phone, or email.
A customer must follow the instructions indicated above in order to take advantage of Axess 's warranty service.
Axess will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any or
all of the necessary information. It will take approximately 4 to 6 weeks to process your warranty request from the
date of receipt. There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. AXESS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY
.
This Warranty gives End User specific rights, and End User may also have other rights that vary from Jurisdiction to
jurisdiction.
The warranty period of a repaired or replaced unit will be the balance of the original purchase date. For example, if
the product was repaired 2 months after the original purchase date, the repaired unit will carry 1 month of warranty or
remainder of initial 90-day warranty.
MP3/MP4 Players / Microphones/ Antennas $9
Tablets/ Picture Frames/ Portable Stereo Systems/ Camcorders/ $12
• Large speakers/ Micro Systems/ Shelf Systems/ Car Audio Systems $15 to $25
• Home/Portable DVD Players $25
• LCD TV 2.5”-12” $30
• LCD TV 13”-22” $45
• LCD TV/DVD 13”-22” $49
• Accessories/Earphones/Mini Speakers $6
• Headphones/ Alarm Clocks/ Mini Radios $8
Cost or replacement parts: $10 shipping and handling + cost of parts (only valid within the Continental U.S.)
• Rechargeable Battery $35
• Remote control $25
• AC cable for audio units $8
• DC cable $20
• USB cable with charger and CD $15
• Manual no charge from Website
Cost for return shipping and handling for special circumstances not covered by warranty
•
•
/
