Horstmann Centaurstat 7 User Instructions

Horstmann
Brand
Horstmann
Model
Centaurstat 7
Type
User Instructions

Horstmann Centaurstat 7 is a programmable thermostat that can help you create a comfortable yet efficient environment in your home. It features:

  • Adjustable target temperatures between 5°C - 30°C
  • Temperature override facility
  • 6 Separate heating periods
  • Temperature lock facility
  • 7 Day programming

With its easy-to-use interface and comprehensive programming options, the Horstmann Centaurstat 7 is the perfect way to take control of your home's heating and save energy.

Horstmann Centaurstat 7 is a programmable thermostat that can help you create a comfortable yet efficient environment in your home. It features:

  • Adjustable target temperatures between 5°C - 30°C
  • Temperature override facility
  • 6 Separate heating periods
  • Temperature lock facility
  • 7 Day programming

With its easy-to-use interface and comprehensive programming options, the Horstmann Centaurstat 7 is the perfect way to take control of your home's heating and save energy.

PAGE 1PAGE 4
LEAFLET No P82162
ISSUE 1
BBAATTTTEERRYY RREEPPLLAACCEEMMEENNTT
UUSSEERRSS IINNSSTTRRUUCCTTIIOONNSS
CCEENNTTAAUURRSSTTAATT 77
GGEETT TTOO KKNNOOWW YYOOUURR CCEENNTTAAUURRSSTTAATT
TThhee ffoolllloowwiinngg aarree ssoommee ooff tthhee CCeennttaauurrSSttaatt ffeeaattuurreess::--
AAddjjuussttaabbllee ttaarrggeett tteemmppeerraattuurreess bbeettwweeeenn 55
oo
CC -- 3300
oo
CC
TTeemmppeerraattuurree oovveerrrriiddee ffaacciilliittyy
66 SSeeppaarraattee hheeaattiinngg ppeerriiooddss
TTeemmppeerraattuurree lloocckk ffaacciilliittyy
77 DDaayy pprrooggrraammmmiinngg
CCEENNTTAAUURRSSTTAATT EELLEECCTTRROONNIICC PPRROOGGRRAAMMMMAABBLLEE TTHHEERRMMOOSSTTAATTSS
can be programmed to create a comfortable yet efficient
environment in your home.
1 SET indicator
2 SET positions
3 SET button
4 OVERRIDE (MINUS) button
5 OVERRIDE (PLUS) button
6 ENTER button
7 Time or Current Temperature
display
8 Target Temperature
9 System ON symbol
10 Day of week indicator
11 PM Indicator
12 Temperature Lock Symbol
1
9
7
6
5
4
2
10
3
Horstmann Controls Limited
Bristol
BS4 1UP
Email: [email protected].uk
Website: www.horstmann.co.uk
SSEERRVVIICCEE AANNDD RREEPPAAIIRR
This product is NOT user serviceable. Please do not dismantle the unit.
In the unlikely event of a fault developing please refer to the RESETTING THE PROGRAMMER section of
this user guide located on page 2. If this fails to resolve the problem please contact a local heating
engineer or a qualified electrician.
Your CentaurStat is battery operated. The batteries
supplied with the unit should last for approximately two
years.
When the batteries are nearing the end of their life a
BATTERY LOW symbol will flash on the display
(see diagram opposite).
automatically return to your CentaurStat.
PPLLEEAASSEE NNOOTTEE::
If the battery fitting time has exceeded 5 minutes some time and temperature adjustment may be
necessary, please refer to the relevant sections located on page 2 and 3 of this user guide.
IIssoollaattee aannyy eexxtteerrnnaall eelleeccttrriicciittyy ssuuppppllyy ttoo yyoouurr CCeennttaauurrSSttaatt bbeeffoorree rreeppllaacciinngg tthhee bbaatttteerryy
between the battery terminals.
(see diagram).
Once batteries have been fitted, offer the left
hand side of the unit up to the mounting
plate ensuring that the two guide lugs are
fitted into the corresponding slots in the side
of the mounting plate.
Now swing the right hand side of the
CentaurStat up against the mounting plate
until the release button clicks into place.
After a few seconds the display will
Press the RELEASE BUTTON on the right hand side of the
unit and swing the front cover away from the mounting
plate by gently pulling on the right.
Remove the old batteries (with the batteries removed
your CentaurStat will retain its programme for
approximately five minutes) and replace them with
three new AA size alkaline batteries, ensure they are
fitted correctly as shown on the label positioned
8
Located under flap
12
11
SSEETTTTIINNGG TTHHEE DDAAYY AANNDD TTIIMMEE OOFF DDAAYY
Press the SET
button until SET
indicator is next to
the clock position
on the display.
Use PLUS
and MINUS
buttons to
adjust time
Press the SET button
until the SET indicator is
returned to the RUN
position.
Use PLUS
and MINUS
buttons to
adjust day
Press
ENTER
Use the PLUS button
to select a day to copy
the programme to
Press
ENTER
CCHHAANNGGIINNGG TTHHEE TTIIMMEESS AANNDD TTAARRGGEETT TTEEMMPPEERRAATTUURREESS
The day setting
indicator will now flash.
Use the PLUS and
MINUS buttons to alter
the start day
DDEEFFAAUULLTT TTIIMMEE SSEETTTTIINNGGSS
NOTE: When setting the time or altering the temperature settings, if a period exceeding 65 seconds is
allowed to elapse between button presses then the CentaurStat will automatically return to the run
position. Any alterations made since the last press of the ENTER button will not be recognised.
Press
ENTER
TTIIMMEE AANNDD TTEEMMPPEERRAATTUURREE SSEETTTTIINNGGSS
The CentaurStat 7 has six temperature
settings per 24 hours. These all have
different start times and temperature
settings. The default factory settings are
shown opposite. Should you want to alter
these default times and temperatures,
proceed as instructed by the following
sections on page 3.
Repeat for all days that
require this programme - The day
indicator will remain illuminated
for days which have already been
copied to
Press
ENTER
Press the SET
button until the
SET indicator is
next to the PROG
position
Press
ENTER
The copy indicator will now illuminate,
this will allow the completed programme
to be duplicated into any or all of the
remaining days - If the copy feature is not
required press ENTER and continue with
the remaining days
Repeat for remaining
5 time and temperature
periods
Press
ENTER
Press
ENTER
The target temperature
setting for the 1st period will
now flash
Use the PLUS and MINUS buttons
to alter the target temperature
TTAARRGGEETT TTEEMMPPEERRAATTUURREE OOVVEERRRRIIDDEE
TTAARRGGEETT TTEEMMPPEERRAATTUURREE LLOOCCKK
PAGE 2
Ensure the SET
indicator is in the normal
RUN position
Use the PLUS and MINUS buttons to
increase or decrease the
temperature settings
The CentaurStat will operate
on this new setting until the
next time period
The temperature lock facility allows you to ‘lock in’ the target
or override temperature of the current heating period.
With the SET indicator in the RUN position press the ENTER
button. The temperature lock symbol will appear on the right
hand side of the display. All controls buttons other then the
ENTER button will be inoperative.
The locked temperature will now override all other temperature settings until the lock is cancelled.
To cancel the temperature lock, and return to normal settings, simply press the ENTER button.
If an override temperature had been set before the lock was activated, the altered setting will remain
until the next switching period is reached.
PAGE 3
PPEERRIIOODD TTIIMMEESS TTEEMMPPSS..
1 6:00
am 20
o
C
2 8:30
am 18
o
C
3 11:30
am 20
o
C
4 1:30
pm 18
o
C
5 5:00
pm 21
o
C
6 10:00
pm 15
o
C
Electronic equipment can in some circumstances be affected by electrical interference. If the
programmer’s display becomes frozen or scrambled; or if you wish to revert back to the default time
settings please use the following procedure.
RREESSEETTTTIINNGG TTHHEE CCEENNTTAAUURRSSTTAATT
PPEERRIIOODD TTIIMMEESS TTEEMMPPSS..
1 7:00
am 20
o
C
2 10:00
am 19
o
C
3 11:30
am 21
o
C
4 1:30
pm 18
o
C
5 5:00
pm 21
o
C
6 11:00
pm 15
o
C
The time setting for the
1st period the will now flash.
Use the PLUS and MINUS
buttons to alter the
start time
Programme the
remaining days, if
alteration to the preset
times are required
Press the SET
button until the
SET indicator is
returned to the
RUN position
DDIISSPPLLAAYY FFEEAATTUURREESS
The CentaurStat has 2 user
displays, by pressing the
PLUS and MINUS buttons
simultaneously, the user
can toggle between either
Display 1 or Display 2.
DDiissppllaayy 11
- Shows current
time and target temperature
DDiissppllaayy 22
- Shows current
and target temperature
MONDAY - FRIDAY
SATURDAY / SUNDAY
Press the SET and ENTER buttons together,
release the buttons and the CentaurStat will
return to preset factory default time settings.
Where an override temperature has been set, this altered setting, will remain until the next time and
temperature setting is reached.
  • Page 1 1
  • Page 2 2

Horstmann Centaurstat 7 User Instructions

Horstmann
Brand
Horstmann
Model
Centaurstat 7
Type
User Instructions

Horstmann Centaurstat 7 is a programmable thermostat that can help you create a comfortable yet efficient environment in your home. It features:

  • Adjustable target temperatures between 5°C - 30°C
  • Temperature override facility
  • 6 Separate heating periods
  • Temperature lock facility
  • 7 Day programming

With its easy-to-use interface and comprehensive programming options, the Horstmann Centaurstat 7 is the perfect way to take control of your home's heating and save energy.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents