9 Feet Umbrella with Auto Tilt and Crank
Installation Manual
A 1
1B
Frame & Ribs
Upper pole
Tilt mechanism
Umbrella supplied is fully assembled. Please read instructions
prior to installation.
Take all parts out of the box. If any parts are missing, please do
not return to the place of purchase directly. Please email us.
A. Assembled umbrella frame with canopy 1pc
B. Holder pole 1pc
2
1
Screw to connect the two
parts (A and B)
C
3. To tilt the umbrella, just need to
continue to turn the crank handle
clockwise till the C
part reaches
the bottom.
Turn the crank handle anticlockwise in the down direction to close
the canopy.
To close the umbrella it must be in the upright position.
3
Shade Sizs(ft) Positioning
MINIMUM Base Size
Suggestions(Ibs)
9 44
55
Thru Table
9
2.62 feet
The pole diameter is 1.5 inches (38mm) the base diameter
needs to be wider than 1.5 inches.
And if you install this umbrella with your table, please make
sure the crank handle is higher than your table.
Free Standing
/
