Page is loading ...
Contents
1. Product Description ....................................................................................... 2
1.1.Product Appearance Diagram ................................................................. 2
1.2.Product Performance Parameters .......................................................... 3
2. Function Introduction .................................................................................... 3
2.1.On/Off Function ...................................................................................... 3
2.2.Display Interface ..................................................................................... 3
2.3.Keys Function.......................................................................................... 4
2.4.Call Function ........................................................................................... 4
3. Setting Instruction ......................................................................................... 5
3.1.Ringtone Selection .................................................................................. 5
3.2.Ringtone Volume Adjustment ................................................................ 5
3.3.ID Setting and Pairing ............................................................................. 5
4. Product Packing List ....................................................................................... 6
2
1.
Product Description
This product is a wireless multifunction intercom system telephone，
able to support 1 to 9999 users in one system, two-way intercom, also
hands-free intercom. The device can use 18650 battery, easy loading and
unloading, long standby time.
It is equipped with a LCD screen, which
displays rich content and clear function instructions. The technology
adopts the 433MHz frequency and has good wall-penetrating
performance. Its wireless communication distance is up to about 1000
meters in the open area.(without any obstacle)
1.1. Product Appearance Diagram
3
1.2. Product Performance Parameters
Power Supply DC 5V
Working Frequency 420~450MHz
Radio-frequency Power 0.5W
Support Users 1-9999
Working Current 650mA
Battery Model 18650
Standby Current 1mA
Wireless Distance 1km(in open area)
Working Temperature -10~40
Device Size 190*105*75mm
2.
Function Introduction
2.1.On/Off Function
1. Turn on: Long press this button for 3 seconds.
2. Power off: Long press this button for 3 seconds.
2.2 Display Interface
4
1. : Indication signal for communication.
2. : Device ID indicator.
3. : Indicate battery 3 levels, cycle beating when charging.
4. : Ringtone volume indicator, total 4 levels.
5. : Setting status indicator. Flashing when setting item is selected, always on
when entering the settings.
6. : Digital indicator. When called, it indicates the caller ID number. At other
states, it indicates the key value.
7. : Intercom volume indicator, total 4 levels.
8. : Indication of code pairing/giving code/receiving code status.
2.3. Button Function
1. ~ : Numbers Key, to enter the corresponding number.
2. : Call Key/Hands-free key, to call other ID devices, press to enter hands-free
mode when receiving the calls.
3. : Setting key. Long press to enter the ID setting and pairing operation selection
menu.
4. : Ringtone volume adjustment key. Press to enter the volume adjustment
menu in standby mod, total 4 levels.
5. : Ringtone selection key. Press to enter the ringtone selection menu in
standby mode, 58 Ringtones for selection by up and down keys.
5
6. : Up and down keys. Volume adjustment during a call, or selection of
items in the setting menu, etc.
7. : Power on/off key. Long press for power on/off. Automatically turn on when
using external cable power, and can not turn off.
8. : Missed call key. Press it to display the latest missed call, At this time, press
the Call button to directly call the missed call.
9. : OK key. In the setting menu, it is the confirmation key. In the standby mode,
it is the deletion key. Press to stop the current ringing (mute) when a call comes in.
10. Handset.
a: When not in calling or being called status, off-hook or on-hook can go back to
standby from any state
b: In the called state, off-hook directly enter the call state. On-hook during the call to
end the call and enter the standby state.
2.4. Call Function
To call another device
In standby mode, press the number keys to select the ID number(0 to 9999) of the
called device, then press call key. Or press the number button in the
off-hook state, after 4 seconds it automatically call the another ID device. If the
other party is not online, it will exit the call after 4 seconds, and return to the
standby state.
To answer a call
When come a call from another ID device, the bell will ring, and the other party’s ID
number will be displayed on the screen. When you press key to enter the
hands-free call mode. If pick up the handset, it enters the handset call mode. After
the call, either party hangs off the handset, both parties will enter the standby state.
3.
Setting Instruction
Note: Under any setting state, picking up or hanging off the handset, the device will exit
and return to the standby state. If without any key operation within 60 seconds, the
device will automatically return to the standby state.
3.1 Ringtone Selection
In the standby state, press key, enter ringtone setting state. Press
keys to select the ringtones, total 58 ringtones can be selected. After the setting is
6
completed, press the key to exit and return to the standby state.
3.2. Ringtone Volume Adjustment
In the standby state, press key, enter the ringtone volume setting. Press
keys to select the ringtone. After setting, press key to exit and
return to standby state.
3.3. ID Setting and Pairing
In the standby state, long press key for 3 seconds, after a sound “Di”, enter
the device ID & pairing operations setting menu, Under this menu, there are 4
sub-menus numbers displayed on the screen, indication that: 1 (ID setting), 2 (paring
code), 3 (receiving code), 4 (giving code), To select by pressing keys. Press
key to enter the next setting.
1. ID setting
In the standby state, long press key for 3 seconds, after a sound “Di”,
enter setting menu. Press the keys to select the flashing number 1 on
the screen, then press the key to enter the ID number setting. Set the device
ID through the number keys, after setting, press the key to return to the
standby state.
Note: It should not have the repeated ID number for devices in one system.
2. Pairing code
To pair any 2 devices. In the standby state, long press key on both
devices respectively for 3 seconds, after a sound “Di”, enter setting menu. Press the
keys to select the flashing number 2 on the screen, then press the
key to enter pairing code mode. The pairing is successfully after 2 sounds “Di,Di”, and
then return to the standby state.
Note: Devices are paired well at factory before delivery. Users don’t need to do
additional pairing operation if without any problems.
7
3. Receiving code
To add more ID devices in one system. In the standby state, long press key for 3
seconds, after a sound “Di”, enter setting menu. Press the keys to select
the flashing number 3 on the screen, then press the key to enter receiving
code mode. The receiving code is successfully after 2 sounds “Di,Di”, and then return
to the standby state.
Note: When receiving the code, there must be another paired device to give the
code
4. Giving code
To add more ID devices in one system. Take any one paired ID device from the system,
long press key for 3 seconds, after a sound “Di”, enter setting menu. Press the
keys to select the flashing number 4 on the screen, then press the
key to enter giving code mode. At this time, the device to be added to the system can
join the system by receiving code, after receiving code successfully, press key to
return to the standby state.
4.
Product Packing List
1. Intercom device x 1
2. DC 5V adapter x 1
3. User Manual x 1
/