2
Product Feature
MOBI-750 is a video recording device helping analyze the causes of accidents by providing video, audio and location
information recorded at the time of vehicle accidents caused by shocks, sudden unintended accelerations, etc.
Continuous Recording Function
It records video images at all time regardless of the occurrence of an accident
Event (Shock) Recording Function
It records video images for a certain period of time before and after a shock on a vehicle is detected.
* Recording time varies depending on the product model.
Function to set linked with Smart Phone
MOBI-750 has a function to play back the images downloaded from the stored video images and to view the images being recorded
on a real time basis in conjunction with the black box in the dedicated application program for the smart phone. The settings of it
also can be done by the smart phone linked with the Black box.
* Some functions may be limited depending on the manufacturer and product model of smart phones.
Emergency Service Function activated at the time of the accident (Applicable to MOBI-750 only)
MOBI-750 has an emergency service function sending a letter message to the linked smart phone by automatically detecting an
accident by the black box in the event that a vehicle is rolled over. This emergency service function is to send information on the
location of the vehicle to the registered telephone number at the time of an accident. (* Not applicable to some models)
High Definition Video Recording a Playback Function
MOBI-750 is recording and playing back video images in HD class and enable to check the video images stored in the memory in
sharper video quality.
Parking Mode Recording Function (Available only when constant power is connected)
This is a mode to record video images for a certain period of time before and after the shock while a vehicle is parked by detecting
even a small shock on the vehicle. In order to use the recording function of this parking mode, the product should be connected to
a constant power source.
Function to check detailed information in a dedicated viewer
The images stored in the memory of the black box can be played back in the dedicated viewer. The detailed information such as the
level of shock, location information through GPS linked map and vehicle driving speed at the time of the accident can be obtained if
the stored images are played back in MOBI-I dedicated viewer for PC
3
Index
Safety Instructions .............................................................................................................................................................................. ..
Precautions in Using the prodcuct .......................................................................................................................................................
Product Configuration ...........................................................................................................................................................................
Product Part Name .............................................................................................................................................................................. 7
Installation .......................................................................................................................................................................................... 9
1. Blackbox installation ............................................................................................................................................................... 9
2. Connection of Video output Cable.......................................................................................................................................... 11
3. Insertion of a micro SD memory card ................................................................................................................................... 11
Product Usage ................................................................................................................................................................................... 12
1. Continuous Recording ............................................................................................................................................................ 12
2. Event Recording ..................................................................................................................................................................... 12
3. Manual Recording .................................................................................................................................................................. 13
4. Parking Mode Recording ....................................................................................................................................................... 13
5. Audio Recording .................................................................................................................................................................... 15
6. Format the micro Sd memory Card ....................................................................................................................................... 15
Voice Guidance description ............................................................................................................................................................... 16
Button Function description ............................................................................................................................................................. 17
Structure of storage folders and file name ...................................................................................................................................... 18
Environment Setting ......................................................................................................................................................................... 20
Use of Dedicated Viewer .................................................................................................................................................................... 27
How to install the dedicated viewer .......................................................................................................................................... 27
Viewer Screen description ......................................................................................................................................................... 28
Playback of video images in a dedicated viewer....................................................................................................................... 30
How to capture images .............................................................................................................................................................. 31
How to capture video images .................................................................................................................................................... 32
Environment setting using dedicated viewer............................................................................................................................ 33
Specification ...................................................................................................................................................................................... 35
4
Safety Instructions
Instructions for user’s safety and prevention of properties damages. Please carefully read these safety
instructions before using the product.
Avoid installing the product in the area preventing from safe driving.
Do not disassemble or repair the product and apply any strong shock on the product.
Do not try to operate the product when driving. If the operation is necessary, stop a vehicle and operate it. We do
not take any legal responsibility for accidents occurred in the operation of the product while driving.
If the product is damaged or broken, it may not operate and record images normally.
The recording quality may be deteriorated depending on the environment in which the images are recorded.
Be careful in handling the product because it is gotten hot along the rise of internal temperature of a vehicle. This
product may experience a malfunction if operated after being parked for a long time in hot or low temperature.
(Operating temperature of the product is ranged between -20˚C ~ +70˚C)
Do not let a liquid like water into the product. It may cause a product failure.
Do not use wet cloth, alcohol, benzene, thinner, etc. for the cleaning purpose
Ensure to connect the product to a stable power source of DC12V or DC24V.
Do not use the cigarette lighter plug provided in the product package if it is not fit to the socket in a vehicle.
Insert the cigarette lighter plug completely into the socket of a vehicle.
Do not use the cigarette lighter plug if it is damaged or broken.
Store the cigarette lighter plug separately removed from a socket if it is not in use for a long time
Do not pull nor disassemble the cigarette lighter plug
Do not breakdown and use the power cable
5
Precautions in using the product
Before starting to use the product, please read this user manual carefully and use the product correctly.
After mounting the product on a vehicle, try to check before use if the product is working properly by carrying out the
test for manual video recording and shock sensing.
Set the date and time in the product before use. They will be automatically set when GPS is connected but you are
asked to check if they are set correctly.
This product is a device to record and save the images in constant mode, event (shock) and parking mode but does not
guarantee the recording of all circumstances of an accident.
Set the shock sensitivity suitable for the environment of a vehicle.
GPS data are not received in the parking mode to save the power.
Be sure to back up all important data and format the micro SD memory card periodically. (Format the SD memory card
after setting the file system of it in FAT32 only)
Remove any obstacle in front of the camera lens of the product or excessive tinting of windshield. This may result in
poor recording quality.
Do not breakdown nor alter the micro SD memory cards.
The micro SD card is a consumable item and is required to be replaced with new one after using a certain period of
time specified by its manufacturer. As the warranty period of the card varies depending on the user's environment.
NEVER remove the micro SD memory card from the slot while power is on or while the Black box is in operation as it
may cause the loss of data and damages to the SD memory card.
6
Product Configuration
Main Body Power cable
(Cigar Jack)
Micro SD card
Micro SD card
adapter
VIDEO Cable (RCA
type)
Cable Holder
Fixing Tape
Wireless Wifi Receiver
GPS Receiver
(option) User manual
Product configuration is subject to change without prior notice for function or quality improvement.
Wifi receiver is provided in MOBI-750 only and does not work with MOBI-700
A basic video cable is included in the product as a standard configuration but the cable needed for the
connection with user's navigation device should be purchased separately from the navigation device
manufacturer
7
Product part name
No Name Description
1 Security LED Displays Security operating condition of the product.
2 Camera Records front view images of a vehicle.
3 Speaker Place that voice or event sound is heard
4 Power Connection Terminal Place to connect power cable.
5 Connection Terminal for GPS Receiver Place to connect GPS Receiver Cable.
6 VIDEO
(External Video Output) Place to connect A/V Cable (RCA).
7 Left Button Press : Manual image recording
Press and hold (more than 5 seconds): Voice recording On/Off.
8 Right Button Press: Volume
Adjustment. Adjustable in 3 levels
Press and Hold (more
than 5 seconds)
Go to Parking Mode manually
9 Operation LED Displays operating condition of the product.
10 Power LED Displays power on/off status..
①
②
⑦
⑨
⑩
⑧
③
④
⑤
⑥
Front Back
Upper
8
No Name Description
11 USB Connector
Connects Wifi Receiver.
12 Slot for micro SD memory card
Slot where the micro SD memory card is inserted
13 Power Switch Turns power on/off
Product Status
Operation Power LED
(Yellow)
Status LED
(Blue)
Security LED
(Blue)
In normal
Operation
Driving Mode ON ON ON
Event Sensing ON Blinking ON
In parking mode
When function is in use ON ON Blinking (Every second)
Event Sensing ON ON Fast Blinking (Every 0.5 second)
⑪
⑫
⑬
Security
LED
Power LED
Operation LED
Left Side Right Side
Operation LED
9
Installation
1. Black box installation.
* Select the best spot for mounting of the product linked with a navigation device and a smart phone before
installation by checking if it blocks driver's view and if it prevents the operation and mount it on the selected spot.
1) After selecting the best spot for the mounting of MOBI-750, align the
camera angle of the product to be in line with the ground.
.
2) Fix the clamp of the mounting cradle of MOBI-750, the angle of which has
already aligned, firmly using a coin, etc. to make it not to be moved
.
3) Connect the power cable and GPS cable to its respective port
.
4) After removing dusts and foreign substances completely from the spot
where the product is going to be mounted, attach the product to the
mounting cradle using a double-sided adhesive tape.
.
10
5) Firmly attach the product not to be fallen off by thoroughly pressing the
area of the mounting cradle where the product is attached with the double-
sided adhesive tape. Attach GPS receiver as well in the proper position
firmly not to be fallen off.
6) After connecting the power cable to the cigarette lighter socket of a
vehicle, arrange the cables neatly with a cable holder
.
7) The installation is now completed.
Reception of GPS signal may be affected by the heavy tinting of the windshield or coating of the
windshield with metallic components resulting in poor recording quality.
Ensure to remove the protection film from the front of camera lens after the product is successfully
installed.
11
2.
Connection of Video output cable
Connect a video output cable to the body of MOBI-750
Connect a video cable to 'VIDEO' port on the top of the body and RCA cable in
the opposite side (yellow area on the picture) to the A/V INPUT of a navigation
device.
The cable needed for connection of the product with a navigation device is not a
standard accessory. If you need the AV INPUT cable to connect the product with
a navigation device, you should purchase it separately from the navigation
device manufacturer
.
3.
Insertion of a micro SD memory card
Insert a micro SD memory card into the slot in the body of MOBI-750
Push a micro SD memory card into the slot in the side of the product until 'click'
sound is heard.
The memory card comes with a product as one of the standard accessories.
Note
A micro SD memory card is a consumable item. It is required to format regularly and highly recommended
to be replaced with new one after using a certain period of time specified by the manufacturer for stable
image recording.
Be sure to remove the micro SD memory card only while the power is off. Important video data saved in the
SD card should be copied and stored in other storage media for the safety purpose.
12
Product Usage
Explanation on recording features of MOBI-750
1. Continuous Recording
The video images are automatically recorded and saved in the micro SD memory card once the power is supplied to
the Black box even the product is not set in an external shock mode or manual recording mode. The constant
recording images will be saved in [Normal] folder.
Voice prompt saying 'Initiating image recording’ will be heard following the introductory greeting message
after ignition of a vehicle.
2. Event Recording
In case the shock with sensitivity bigger than the set value is detected by a shock detection sensor of the Black box,
the both images before and after the detection of the shock will be saved in the micro SD memory card. The video
images will be saved in the [Event] folder.
* MOBI-750: for 10 seconds before the shock/ for 10 seconds after the shock
In case that the event recording is started after detection of shock, blue LED starts blinking.
When shock is detected, 'ding-dong' beep sound will be heard
In MOBI-750, beep sound 'ding-dong' will heard followed by alarm sound 'piririk piririk piririk’ in the event
that a severe degree of shock is detected
This product is integrated with the special function enabling it to stably save the last image data even the
power is cut by an external shock while the recording is in progress. This function prevents the image data
from being broken while they are saved.
Note
13
3. Manual Recording
In case that recording function is necessary in addition to the basic constant recording mode, the image can be saved
in manual recording mode
In case that the left button in the main body is pressed, a voice prompt saying 'video images are being
recorded' will be heard and images for total 20 seconds 10 seconds before/10 seconds after the button is
pressed in case of MOBI-750, will be saved in the micro SD memory card at the same time. The video images
recorded in manual recording mode will be saved in the [EVENT] folder.
4. Parking Mode Recording
This is a mode recording images for total 20 seconds started by detecting minor shock or motion of objects while a
vehicle is parked
MOBI-750 : for 10 seconds before the shock/ for 10 seconds after the shock
The video images recorded in the parking mode will be saved in the [Parking] folder
The image recording function does not work if the ignition of a vehicle is turned off in case that the power is
supplied to the product through the cigarette lighter cable.
(* except for some vehicles)
It is possible to record images in parking mode only when the product is directly connected to the constant
power
Constant recording is stopped while the recording in the parking mode is in progress and activated only by
the detection of shocks or motion of objects depending on the user's setting.
.
14
Setting of parking mode
Automatic mode: it automatically switches to the parking mode if no shock is detected for 20 minutes while
ignition of a vehicle is turned on
Manual mode: it manually switches to the parking mode when the right button in the main body is pressed
and held for more than 5 seconds,
(Manual mode is prior to Automatic mode and it switches immediately to the parking mode by pressing and
held the right button in the main body for more than 5 seconds even the automatic mode is on)
Automatic Mode may not be working properly depending on the type of a vehicle and parking conditions. Be
sure that automatic mode is working properly as the failure to automatically switch to the parking mode in
the automatic mode results in the unexpected erasure of the images mistakenly saved by the constant mode
while a vehicle is parked because the images saved in the constant mode are erased after a certain period of
time is passed. In this case, it is recommended to manually switch the product to the parking mode to
correctly save the images in the parking mode.
Voice prompt saying "Convert to the parking mode" will be heard as soon as the parking mode is on
When the parking mode is on, the blue security LED on the front side of the product starts blinking at every
one second and faster at every 0.5 second as soon as a shock is detected
Release from parking mode
Automatic release: it automatically releases from the parking mode if the movement of a vehicle is
detected for a certain period of time
Manual release: it manually releases from the parking mode immediately after either right or left button in
the main body is pressed.
As the image data saved in a micro SD memory card may be damaged if the card is removed by force while
the power is on, be sure to remove the card from the slot after the power turns off and all LED lamps on the
product turn off.
15
5.
Audio Recording
Voice recording function can be turned on or off during images are being recorded.
Voice recording function can be turned on or off by pressing the left button in the main body for more than 5
seconds
Voice prompt saying 'Initiating image recording' will be heard as soon as the voice recording function is set
and beep sound will be heard when this function is released.
In order to format a micro SD memory card in which image data are saved, press left and right buttons in the
main body simultaneously for more than 5 seconds.
6. Format the Micro SD memory card.
In order to format a micro SD memory card in which image data are saved, press left and right buttons in the main
body simultaneously for more than 5 seconds.
The existing values set previously remains unchanged even after the micro SD memory card is formatted in
the main body
All the existing values will be deleted in case that the micro SD memory card is formatted in a PC and all
setting values are needed to be set again.
If you want to format the micro SD memory card with all the existing values unchanged, proceed the
formatting of the card in the main body.
16
Voice Guidance description
NO Operation Voice Prompts Remark
1 Power ON Ding-dong + Hello. This is MOBI-I
2 When starting recording or resuming
recording Initiating image recording.
3 When GPS is connected GPS is connected.
4 When external power is cut Power is disconnected
5 Memory card cannot be recognized after
power is on Please check the memory card
6 System rebooting Please restart system.
7 Error is found in the memory car An error memory card occurred.
8 When judged that many unreadable files are in
the card Formatting is recommended.
9 When S/W upgrade is completed Upgrade is completed.
10 When switched to the parking mode (check G-
Sensor value for 20 minutes) Converting to parking mode
11 SD card format (Initialization)
Formatting the memory card
(※Upon completion)
Please restart system.
Initialization
12 Audio Mute is released Activation
13 Audio Mute is activated (effect sound output)
: triple Beep sound
14 When event recording is in progress
(When an external shock is detected)
- (effect sound output) Ding-dong
-(Severe shock is detected) Ding-dong +
Piririk Priririk Piririk
15 Manual recording
(Click left button) - (effect sound output) Ding-dong
17
Button function description
Following functions can be carried out by using buttons in the main body.
Button Menu
Left Button
- Press short: Manual recording function
- Press and hold (more than 5 seconds):
Voice recording On/Off.
When recording function is OFF ※
‘ Triple beep sound’ will be heard
When recording function is ON ※
(Voice prompt) Initiating image recording'
Right Button
- Press short: Adjust volume 3 steps adjustment
- Press and hold (more than 5 seconds) Switch to the parking mode manually
※Press and hold left and right buttons simultaneously: To format a micro SD memory card
※Audio volume adjustment: Speaker volume can be adjusted by pressing right button in the main body (Note:
the audio volume of the voice prompts about error messages and notes cannot be adjusted)
※When the voice recording function is selected, if the left button in the main body is pressed and held more than 5
seconds, 'Triple beep sound' is heard and the voice recording function becomes deactivated or voice prompt is heard
and the voice recording function becomes activated.
※Manual voice recording function: if the left button in the main body is pressed, manual voice recording is started.
※Manual parking mode setting function: if the right button in the main body is pressed and held more than
5 seconds, the parking mode can be set manually.
18
Structure of storage folders and file name
Recorder video images are saved by mode in the micro SD memory card. The saved video images are saved in a
regular video file format and can be played in popular PC video playback programs (Window media, KMP, etc.)
MOBI-750
Recorder video images are saved by mode in the micro SD memory card. The saved video images are saved in a
regular video file format and can be played in popular PC video playback programs (Window media, KMP, etc.)
*The file save items of Mobi-750 is subject to change
1) Following folders are shown under the removable HDD sector if the memory card of MOBI-700 is inserted using an
appropriate adaptor to the slot in a PC.
Event: Save the events, manually recorded images.
Log: Save the driving records.
Normal: Save the constant images.
Parking: Save the recorded images in the parking mode.
Setup: Save the parameter setting information.
Temp: Save files temporarily.
Update: Contain information on firmware update.
19
2) If the relevant folder is clicked, saved video files and JPG files are displayed. (Ex.: Event folder)
- JPG file is a image files used to display the saved file in a thumbnail image.
- The name of the video files will be saved by category shown below.
Ex.) E000_0711105035
E000 0701 10 50 35
Event image / Number Jan 1st , 10hour 50min 35sec
Method of Recording/
Number Month-Day-Hour-Min-Sec
E: Recorded Event images
N: Recorded Constant images
P: Recorded Images in the Parking Mode
20
Environment Setting
MOBI-750
The function in MOBI-750 playing video images saved in a micro SD memory card by smart phones equipped with a
slot for a micro SD memory card is one of the additional features to the basic function available in an ordinary Black
box and may be limited in some smart phones.
In addition, the way to set a smart phone for use of this function may vary depending on manufacturer and model.
Please contact the dealer from whom your product was purchased if you have any question.
The parameters in MOBI-750 can be changed through a smart phone application program (MOBI-I). This function is
available only when power of the product is on.
1) Download of MOBI WIFI application
The application can be available from Google Playstore, T-store, etc. in case of Android smart phones and Apple store
in case of Apple smart phones by entering 'MOBI-I' in the respective search window
2) Setting the parameters for Wifi Hotspot
After installing the application program, set the parameters for Hotspot in 'Wi-Fi Hotspot Configuration' window
that can be reached through following paths.
Setting > Wireless and Network > Tethering and Mobile Hotspot (or Tethering and Mobile AP) > Mobile Wi-Fi
Hotspot Setting > Wi-Fi Hotspot Configuration
Click save button after entering Network SSID, Security Mode and Password.
Network SSID Factory default value for Network SSID is set 'mobi'
Security Mode Select WPA2 PSK value
Password Factory default password is set ‘12345678’
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
