Page is loading ...
SCOEBT - BLUETOOTH HEADPHONES
INSTRUCTION
MANUAL
WARNINGS
Read the below warnings thoroughly before your start using your
headphones. Store this quick start guide, warranty and receipt
alongside with product packaging. The safety precaution instructions
reduce the risk of re and injury when correctly complied to.
To reduce the risk of injury:
• Keep batteries out of reach of children.
• Do not heat, open, or dispose of battery pack in re.
• Do not allow metal objects to touch the battery on the device.
• Do not expose battery pack to excessive heat.
Page 2 of 4
Listening at a high volume for a long time may
damage your hearing. It is recommended that
you use the lowest volume necessary, when
speaking and listening to music.
HOW TO USE
Page 3 of 4
Press and hold the POWER button to turn heardphones ON.
The headphones will automatically enter pairing mode.
On your smart device, in BT settings search pairing name
“SCOEBT”. Press and hold POWER button to turn o.
PAIR MODE - Long press for 3 seconds to enter pairing mode
if it asks for password on your smart device, use “0000”
CALLS: When receiving a phone call,
Press above shown power button 1 time to answer the call.
Press 2 (two) times too reject call.
When in normal mode, Press 2 (two) times to redial previous phone number.
- Short Press (Previous) / Long Press (volume down)
- Short Press (Next) / Long Press (volume up)
- Press to disconnect BT , press again to connect BT again.
Page 4 of 4
CUSTOMER SUPPORT
info@ayonz.com -
DISTRIBUTED BY: Ayonz Pty Ltd
/
